• ETRI Journal
• /
• 제30권1호
• /
• pp.129-140
• /
• 2008

In this paper, we propose a novel ant colony optimization (ACO)-based test scheduling method for testing network-on-chip (NoC)-based systems-on-chip (SoCs), on the assumption that the test platform, including specific methods and configurations such as test packet routing, generation, and absorption, is installed. The ACO metaheuristic model, inspired by the ant's foraging behavior, can autonomously find better results by exploring more solution space. The proposed method efficiently combines the rectangle packing method with ACO and improves the scheduling results by dynamically choosing the test-access-mechanism widths for cores and changing the testing orders. The power dissipation and variable test clock mode are also considered. Experimental results using ITC'02 benchmark circuits show that the proposed algorithm can efficiently reduce overall test time. Moreover, the computation time of the algorithm is less than a few seconds in most cases.

• 소성∙가공
• /
• 제15권1호
• /
• pp.76-81
• /
• 2006

In this study, warpage characteristics of mobile phone cover through injection molding process were investigated using design of experiments in injection molding process. Warpage in plastic injection molding has a significant effect on quality of product. Effects of injection time, packing pressure, packing time, mold temperature and melt temperature on the warpage of mobile phone cover were considered by numerical analysis and experiment with Taguchi method. The degree of warpage for the injection molded part was measured by using three dimensional coordinate measurement machine. It was shown that temperature control factor has more significant effect on the warpage of mobile phone cover than pressure control factor.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 금형가공,미세가공,플라스틱가공 공동 심포지엄
• /
• pp.126-131
• /
• 2005

In the present study, warpage characteristics of mobile phone cover through injection molding process were investigated by using design of experiments. Warpage in plastic injection molding process has a significant effect on quality of product. Effects of injection time, packing pressure, packing time, mold temperature ana melt temperature on warpage of mobile phone cover were considered by CAE analysis and experiment with Taguchi method. The degree of warpage for the injection molded product was measured by using three dimensional CMM. It was shown that temperature parameter has more significant effect on the warpage of mobile phone cover than pressure parameter.

• 한국인터넷방송통신학회논문지
• /
• 제20권2호
• /
• pp.209-214
• /
• 2020

동등분할 문제(EPP)는 학생이 특정 분야에 대한 경험 유무인 [0/1]이진수 형태를 갖는 경우와 [1,2,3,4,5]와 같은 정수형의 기량 수준을 갖고 있는 문제로 분류된다. 이진수형 EPP에 대해서는 다항시간으로 최적 해를 구하는 알고리즘이 알려져 있다. 반면에, 정수형 기량 수준을 갖는 EPP에 대해서는 다항시간으로 해를 구하는 알고리즘이 존재하지 않아 아직까지는 메타휴리스틱의 일종인 타부탐색법만이 알려져 있는 난제이다. 본 논문은 NP-난제인 정수형 기량 수준을 갖는 EPP에 대해 다항시간으로 해를 찾아가는 규칙을 가진 휴리스틱 탐욕방법을 제안한다. 제안된 알고리즘은 각 분야의 기량 수준별 빈도수 내림차순으로 그룹 수를 충족하는 하한치(LB)를 구하고, LB 이상인 기량수준을 가진 학생들을 각 그룹 상자에 우선하여 채우고, LB 이하 기량수준을 가진 학생들을 추가로 각 상자에 배분하는 방법을 제안하였다. 제안된 알고리즘을 실험 데이터에 적용한 결과 기존의 타부탐색법으로 구한 결과를 개선하는 효과도 얻었다.

• 한국시뮬레이션학회논문지
• /
• 제16권4호
• /
• pp.67-75
• /
• 2007

RFID(Radio Frequency IDentification)가 국방, 물류/유통, 도서 관리 등의 분야에서 바코드를 대체하는 대안으로 각광을 받고 있으나, 적용 범위가 제품 생산이나 판매 유통 관리 등의 분야로 제한되어 있는 것이 사실이다. 본 논문에서는RFID 기술을 공정관리에 적용해 본 후, 그 효과를 분석하였다. 또한 유통단계뿐 아니라 제품의 이력관리 및 품질관리에 RFID의 적용 가능성을 타진하기 위해, 제조 및 포장공정에 활용하는 방안을 제안하였다. RFID 적용 효과를 검증하기 위해 실제 제조업체를 대상으로 현재 바코드를 부착하는 공정을 RFID로 변경하였을 때 공정 개선 효과를 산출하였으며, 연구 결과 RFID 도입에 소모되는 초기 투자 비용을 상쇄할 수 있는 비용절감 효과가 있음을 확인하였다. 이로써 높은 초기 비용으로 인해 바코드에서 RFID로의 교체를 망설이는 제조업체들의 의사결정에 기여할 수 있을 것으로 기대된다.

• 한국세라믹학회지
• /
• 제34권4호
• /
• pp.343-350
• /
• 1997

To fabricate the ceramic/metal(SiC/ Al alloy) composite, SiC preform was prepared by Pressureless Powder Packing Forming Method and 6061 Al alloy was infiltrated into the preform. Uniform compact having an average pore size of 10 ${\mu}{\textrm}{m}$ and narrow pore size distribution was prepared. Phenolic resin solution(40 wt%) was penetrated into the SiC compact, and then the compact was preheated at the temperature of 120$0^{\circ}C$. The pore size distribution and the microstructure of the preform were not changed by preheating. An uniform microstructure without any crack in the preform was obtained in SiC-Al alloy composite. The infiltration of 6061. Al alloy into the preform began at the temperature of 130$0^{\circ}C$ and the amount of infiltration increased in proportion to the infiltration temperature and the soaking time. The increasement rate of the infiltration amount decreased after 3 h. As a result of the infiltration at 140$0^{\circ}C$ for 4 h, Al alloy was well distributed in the interparticle channels and the relative density of the composite was above 98%. The strength and the fracture toughness of the composite were 303 MPa and 21.65 MPam1/2, respectively.

• 한국정밀공학회지
• /
• 제28권3호
• /
• pp.370-376
• /
• 2011

Recently, the application range of plastic gears is widely expanding by the development of engineering plastics with good mechanical properties. Plastic gears have excellent performances such as light weight, water resistance and vibration absorbing ability for metallic gears. In this study, the optimization of injection molding process was done for the large disk type plastic gears of auto phoropter. Design Of Experiment (Taguchi method) was adopted to find a tendency of molding conditions that influence the flatness of disk type gear. Four main factors for molding conditions were selected based on injection temperature, filling time, packing pressure and mold temperature. Also, Filling, packing and cooling analyses were carried out to evaluate Z directional deflection of large disk type gear by using the simulation software (Moldflow) based on the DOE. From the results, it was found that the injection temperature and packing pressure are the most sensitive parameters for the Z directional deflection of large disk type gears.

• 한국식생활문화학회지
• /
• 제29권1호
• /
• pp.1-8
• /
• 2014

This study was carried out to investigate the consumption behaviors of environmentally-friendly agricultural products, including satisfaction of purchases. Questionnaires completed consumers were statistically analyzed. Regarding purchase frequencies of environmentally-friendly agricultural and animal products, consumers consumed them 1 time per month. No significant differences in consumption by age, living area, family type, or BMI were found. Exactly 38.2% of consumers preferred to purchase items in the packing amount of 0.2-0.5 kg, whereas 39.7% of consumers preferred amounts from 0.5-1.0 kg. Significant differences in packing amount were found according to age (p<0.05) and family type (p<0.01). However, there were no significant differences according to living area or BMI group. Many consumers made decisions based on the outer packing label (69.6%). Significant differences by age and living area were not found, whereas there was significant difference according to family type (p<0.05). Consumers answered that they purchased products in a general supermarket (24.7%) and cooperative (24.2%). Significant differences were found by age and living area (p<0.01) but not by family type. Consumer satisfaction of purchases scored 3.39 out of 5 points. In conclusion, significant differences in consumer satisfaction were not found according to age, living area, family type, or BMI.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2005년도 특별논문집
• /
• pp.144-150
• /
• 2005

The size of ship is being larger than the past in the shipping industry thanks to the increased quantity of goods transported by ship. Therefore, HHIC (Hanjin Heavy industries & Construction co., LTD) invented innovative construction method, so called 'DAM', to build a ship which is longer than the length of the HHIC's dry dock. On Erection at the sea by the application of DAM Method, Squeezing & Detachment of A/F film may occur as a result of the wave and the constriction between A/F film pre-applied on the side shell and DAM's Rubber Packing. Thus, the test for finding the minimum curing time of A/F film was performed to protect Squeezing & Detachment of A/F film on the hull. To verify the soundness of paint and to find the optimum condition during the erection period of the DAM, laboratory test was carried out under no immersion condition through the application of various coatings on the Rubber Packing. And two methods were selected from the results of laboratory test for actual MOCK-UP Test. In addition, the test for the film profile per temperature of silicone A/F coat and the film Squeezing was performed.

• 설비공학논문집
• /
• 제21권9호
• /
• pp.496-504
• /
• 2009

In order to investigate the feasibility of a direct ice slurry transporting system for the purpose of district cooling, a case study of field application is performed. The research aims include the field measurement of ice packing factor, the performance of coldness delivery, and the branching characteristics of ice slurry. Two representative types of pipe branch are dealt with in this work. For the slurry flow with ice volume fraction of 0.16 or less, the pipe blocking due to aggregation is not observed. Based on the time-wise variation of temperature in the storage tank, a calculating method of ice packing factor is newly developed, which seems to be useful when the brine concentration is unknown. It is confirmed that the mass flow rate of ice slurry per unit cooling load is markedly reduced with increasing the ice content. The pumping power also decreases, but remains unchanged for high ice fractions. The distribution of ice particle before and after branching shows a good uniformity within the range of 5% difference, but yields a unique trend depending on the flow rate.