• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.2
• /
• pp.93-100
• /
• 2008

In this paper, we address a novel simulated annealing(SA)-based test scheduling method for testing network-on-chip (NoC)-based systems-on-chip(SoCs), on the assumption that the test platform proposed in [1] is installed. The proposed method efficiently mixed the rectangle packing method with SA and improved the scheduling results by locally changing the test access mechanism(TAM) widths for cores and the testing orders. Experimental results using ITC'02 benchmark circuits show that the proposed algorithm can efficiently reduce the overall test time.

• Journal of Environmental Science International
• /
• v.15 no.1
• /
• pp.77-84
• /
• 2006

An effective technique of sludge separation is required for excess sludge of sewage or wastewater plant. The separation of bulking sludge of paper manufacturing plant was studied using DAF(Dissolved Air Flotation) system. The effects of parameters such as nozzle type, A/S(air/solid) ratio. pressure, injection time of pressured water and saturation time were examined. The results showed that the best nozzle type was flat which had small orifice hole, The optimum A/S ratio and pressure were $7.070\times10^{-3}$(recycle ratio of pressured water $20\%$) and 5atm, respectively. Injection times of pressurized water around 20-25 sesc and flotation time of 30 min appeared to be optimal for the DAF operation. The order of performance of packing was 18 mm > 22 mm > 32 mm.

• Korea-Australia Rheology Journal
• /
• v.20 no.2
• /
• pp.59-63
• /
• 2008

A theoretical model was developed to describe the flow behavior of a filled polymer in the packing stage of reaction injection molding and predict the residual stress distribution of thin injection-molded parts. The model predictions were compared with experiments performed for phenol-formaldehyde resin filled with wood dust and cured by urotropine. The packing stage of reaction injection molding process presents a typical example of complex non-isothermal flow combined with chemical reaction. It is shown that the time evolution of pressure distribution along the mold cavity that determines the residual stress in the final product can be described by a single 1D partial differential equation (PDE) if the rheological behavior of reacting liquid is simplistically described by the power-law approach with some approximations made for describing cure reaction and non-isothermality. In the formulation, the dimensionless time variable is defined in such a way that it includes all necessary information on the cure reaction history. Employing the routine separation of variables made possible to obtain the analytical solution for the nonlinear PDE under specific initial condition. It is shown that direct numerical solution of the PDE exactly coincides with the analytical solution. With the use of the power-law approximation that describes highly shear thinning behavior, the theoretical calculations significantly deviate from the experimental data. Bearing in mind that in the packing stage the flow is extremely slow, we employed in our theory the Newtonian law for flow of reacting liquid and described well enough the experimental data on evolution of pressure.

• Composites Research
• /
• v.29 no.1
• /
• pp.7-15
• /
• 2016

The quality of polymeric automotive parts depends highly on an injection molding process, which causes various defects, such as warpage, sink marks, weld lines, shrinkage, residual stress, etc. This study is to determine the optimum processing parameters, such as packing pressure, mold temperature, melting temperature, and packing time for the manufacture of polycarbonate buttons in cars on the basis of FEM, the Taguchi method, and analysis of variance (ANOVA). As a result, the optimum processing parameters of buttons made of polycarbonate material were obtained as follows: 140 MPa of packing pressure, $105^{\circ}C$ of mold temperature, $292.5^{\circ}C$ of melting temperature and 1 second of packing time. A gain of S/N (signal to noise) ratio, 10.2, was obtained with the optimum values. Moreover, the melting temperature was found to be the most significant factor followed by the mold temperature.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.111-114
• /
• 2005

Experimental and numerical studies were carried out in order to investigate the processability and the transcriptability of the injection molding of micro structures. For this purpose, we designed a mold insert having micro rib patterns on a relatively thick base part. Mold insert has a base of 2mm thickness, and has nine micro ribs on that base plate. Width and height of the rib are $300{\mu}m\;and\;1200{\mu}m$, respectively. We found a phenomenon similar to 'race tracking', due to 'hesitation' in the micro ribs. As the melt flows, it starts to cool down and melt front located in the ribs near the gate cannot penetrate further because the flow resistance is large in that almost frozen portion. When the base is totally filled, the melt front away from the gate is not frozen yet. Therefore, it flows back to the gate direction through the ribs. Consequently, transcriptability of the rib far from the gate is better. We also verified this phenomenon via numerical simulation. We further investigated the effects of processing conditions, such as flow rate, packing time, packing pressure, wall temperature and melt temperature, on the transcriptability. The most dominant factor that affects the flow pattern and the transcriptability of the micro rib is flow rate. High flow rate and high melt temperature enhance the transcriptability of micro rib structure. High packing time and high packing pressure result in insignificant dimensional variations of the rib. Numerical simulation also confirms that low flow rate causes a short shot of micro ribs and high wall temperature helps the filling of the micro ribs.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.7 no.3
• /
• pp.116-121
• /
• 2004

Treatability tests were conducted to study the feasibility of EMMC process as a recycling-water treatment system in high density seawater aquaculture farm. To study the effect of organic and ammonia nitrogen loading rate on system performance, hydraulic retention time was reduced gradually from 12hr to 10min. The conclusions are can be summarized as follows. When the system HRT was reduced from 12hr to 2hr gradually, there was little noticeable change(reduction) in ammonia nitrogen removal efficiencies. However, removal efficiencies were decreased dramatically when the system was operated under the HRT of less than 2hr. In case of organics(COD), there was no dramatic change in removal efficiencies depending on HRT reduction. COD removal efficiencies were maintained successfully higher than 9％ when the system was operated at tile HRT of 10 min. System performances depending on media packing ratio in the reactors were also evaluated. There were little differences in each reactor performances depending on media packing ratio in reactor when the reactors were operated under the HRT of longer than 1hr. However, differences in reactor performances were considerably evident when the reactors were operated under the HRT of shorter than 1hr. When comparing reactor performance among 25％, 50％,7 5％ packed reactor, it can be judged that media packing ratio more than 50％ plays no significant role in increasing reactor performance. For this reason, packing the media less than 50％ is more reasonable way in view of economic. Such a tendency shown in COD removal efficiencies well agreed with the variation of ammonia-nitrogen removal efficiencies according to the media packing ratio in reactors at each HRT. Difference in effluent ammonia-nitrogen concentration between 50％ media packing reactor and 75％ media packing reactor was negligible. When comparing with the results of 25％ packing reactor, difference was not so great.

• Journal of Korea Multimedia Society
• /
• v.14 no.9
• /
• pp.1165-1174
• /
• 2011

In data broadcasting systems, servers continuously disseminate data items through broadcast channels, and mobile client only needs to wait for the data of interest to present on a broadcast channel. However, because broadcast channels are shared by a large set of data items, the expected delay of receiving a desired data item may increase. This paper explores the issue of designing proper data allocation on multiple broadcast channels to minimize the average expected delay time of all data items, and proposes a new data allocation scheme named two level bin-packing(TLBP). This paper first introduces the theoretical lower-bound of the average expected delay, and determines the bin capacity based on this value. TLBP partitions all data items into a number of groups using bin-packing algorithm and allocates each group of data items on an individual channel. By employing bin-packing algorithm in two step, TLBP can reflect a variation of access probabilities among data items allocated on the same channel to the broadcast schedule, and thus enhance the performance. Simulation is performed to compare the performance of TLBP with three existing approaches. The simulation results show that TLBP outperforms others in terms of the average expected delay time at a reasonable execution overhead.

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.4
• /
• pp.15-24
• /
• 1999

In this paper, we propose a new CPLD technology mapping algorithm improving run-time under time constraint. In our technology mapping algorithm, a given logic equation is constructed as the DAG type, then the DAG is reconstructed by replicating the node that outdegree is more than or equal to 2. As a result. it makes delay time and the number of CLBs, run-time to be minimized. Also, after the number of multi-level is defined and cost of each nodes is calculated, the graph is partitioned in order to fit to k that is the number of OR term within CLB. The partitioned nodes are merged through collapsing and bin packing is performed in order to fit to the number of OR term within CLB.

• Korean Chemical Engineering Research
• /
• v.48 no.5
• /
• pp.668-671
• /
• 2010

A lab scale distillation experiment is conducted with small size packing used in lab scale multi-tray distillation equipment for the performance evaluation of distillation system. A sufficient surface are yielded with 6.7 mm cylindrical packings made of stainless steel, and a good liquid holdup and residence time are resulted. The comparison between the theoretical tray from the HYSYS and the experimental distillation outcome indicates that a 7 cm HETP from 27 cm packing height and a 8 cm HETP from 45 cm packing height are obtained. Comparing with the 8 cm HETP of commercial structured packing shows a similar experimental results obtained here. The 7 cm HETP is available with a complete insulation, and the importance of the insulation is proved. The results of this study indicates that a practical distillation column used in field can be tested in lab.

• Journal of Advanced Navigation Technology
• /
• v.16 no.3
• /
• pp.488-494
• /
• 2012

This paper classifies the self-defense techniques used by the malicious software based on their approaches, introduces the packing technique as one of the code protection methods and proposes a way to quickly analyze the packed malicious codes. Packing technique hides a malicious code and restore it at runtime. To analyze a packed code, it is initially required to find the entry point after restoration. To find the entry point, it has been used reversing the packing routine in which a jump instruction branches to the entry point. However, the reversing takes too much time because the packing routine is usually obfuscated. Instead of reversing the routine, this paper proposes an idea to search some features of the startup code in the standard library used to generate the malicious code. Through an implementation and a consequent empirical study, it is proved that the proposed approach is able to analyze malicious codes faster.