• 대한임베디드공학회논문지
• /
• 제15권2호
• /
• pp.103-109
• /
• 2020

This paper finds solutions for using ZigBee in wireless networked control system (WNCS). The round trip time delay and packet loss rate of the WNCS are measured. On the basis of these measured data, a playback buffer is used to solve the variable time delay in WNCS, and a Smith predictor is introduced to compensate for the time delay. The WNCS was able to be actually constructed to perform DC motor position control with 40 Hz sampling frequency.

• Journal of information and communication convergence engineering
• /
• 제13권4호
• /
• pp.235-240
• /
• 2015

A decimation chain for multi-standard reconfigurable radios is presented for 900-MHz and 1,900-MHz dual-band cellular standards with a data interpolator based on the Lagrange method for adjusting the variable data rate to a fixed data rate appropriate for each standard. The two proposed configurations are analyzed and compared to provide insight into aliasing and the signal bandwidth by means of a newly introduced measure called interpolation error. The average interpolation error is reduced as the ratio of the sampling frequency to the signal BW is increased. The decimation chain and the multi-rate analog-to-digital converter are simulated to compute the interpolation error and the output signal-to-noise ratio. Further, a method to operate the above-mentioned chain under a compressed mode of operation is proposed in order to guarantee continuous packet connectivity for inter-radio-access technologies. The presented decimation chain can be applied to LTE, WCDMA, GSM multi-mode multi-band digital front-end which will ultimately lead to the software-defined radio.

• Nuclear Engineering and Technology
• /
• 제54권10호
• /
• pp.3587-3594
• /
• 2022

A distributed high-speed data acquisition and monitoring system for the RF negative ion source at Huazhong University of Science and Technology (HUST) is developed, which consists of data acquisition, data forwarding and data processing. Firstly, the data acquisition modules sample physical signals at high speed and upload the sampling data with corresponding absolute-time labels over UDP, which builds the time correlation among different signals. And a special data packet format is proposed for the data upload, which is convenient for packing or parsing a fixed-length packet, especially when the span of the time labels in a packet crosses an absolute second. The data forwarding modules then receive the UDP messages and distribute their data packets to the real-time display module and the data storage modules by PUB/SUB-pattern message queue of ZeroMQ. As for the data storage, a scheme combining the file server and MySQL database is adopted to increase the storage rate and facilitate the data query. The test results show that the loss rate of the data packets is within the range of 0-5% and the storage rate is higher than 20 Mbps, both acceptable for the HUST RF negative ion source.

• 정보처리학회논문지C
• /
• 제16C권2호
• /
• pp.237-244
• /
• 2009

무선 센서 네트워크에서의 혼잡은 데이터 손실 비율을 증가시키고, 전송 지연이 길어지는 문제점을 야기한다. 기존의 무선 센서 네트워크를 위한 혼잡 제어 방법들은 혼잡을 판단하고, 혼잡에 연관된 센서노드들을 선택하여 샘플링 주기를 조절함으로써 전송량을 줄이는 방법을 사용한다. 그러나 샘플링 주기 조절 기법은 시간적 데이터 손실에 민감한 응용에 사용하기 어려운 문제점이 있다. 본 연구에서는 무선 센서 네트워크에서의 혼잡을 해결하는 새로운 혼잡 제어 기법인 ACT를 제안한다. 제안하는 ACT기법에서는 큐 감시를 통해 다중 큐 임계값을 사용하여 네트워크의 상태를 판단한다. ACT는 혼잡 발생시 패킷 전송 간격을 조절하는 적응적 흐름 제어 기법을 통해 네트워크의 효율성을 높이며 패킷판단 기법을 통하여 노드간의 공평성을 보장한다. 또한 압축을 이용하여 센서노드 간 전송량을 조절하도록 하여 이용가능한 데이터양을 증가시킨다. 실험을 통하여 제안된 ACT기법이 기존 프로토콜에 비해 네트워크의 패킷 전송 효율성을 향상시키며 센서노드들에게 공평성있는 데이터전송을 제공함을 보인다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제5권1호
• /
• pp.68-82
• /
• 2011

Wireless mesh networks (WMNs) provide high-speed backbone networks without any wired cable. Many researchers have tried to increase network throughput by using multi-channel and multi-radio interfaces. A multi-radio multi-channel WMN requires channel assignment algorithm to decide the number of channels needed for each link. Since the channel assignment affects routing and interference directly, it is a critical component for enhancing network performance. However, the optimal channel assignment is known as a NP complete problem. For high performance, most of previous works assign channels in a centralized manner but they are limited in being applied for dynamic network environments. In this paper, we propose a simple flow estimation algorithm and a hybrid channel assignment algorithm. Our flow estimation algorithm obtains aggregated flow rate information between routers by packet sampling, thereby achieving high scalability. Our hybrid channel assignment algorithm initially assigns channels in a centralized manner first, and runs in a distributed manner to adjust channel assignment when notable traffic changes are detected. This approach provides high scalability and high performance compared with existing algorithms, and they are confirmed through extensive performance evaluations.

• 한국통신학회논문지
• /
• 제33권5A호
• /
• pp.479-486
• /
• 2008

본 논문은 MIMO-OFDM 시스템을 기반으로 한 Gbps급 차세대 무선전송 시스템에서 m-sequence를 이용하여 효율적으로 훈련심볼을 설계하는 방법을 제안한다. 계산량을 고려하지 않는 일반적인 훈련심볼 설계방법에는 랜덤한 시퀀스에 대하여 시스템 요구사항을 하나하나 비교해가며 모든 사항이 만족되었을 때 훈련심볼로 채택하는 기법이 존재한다. 본 논문에서는 상관관계 특성이 우수하여 대역확산 통신 방식 등에서 사용하는 m-sequence를 기반으로 제한된 탐색공간 내에서 효율적인 MIMO-OFDM 시스템을 위한 훈련심볼의 단계별 설계 및 검증방법을 논의한다. 제안된 방법은 패킷 기반 MIMO-OFDM 무선통신 시스템에서 자동이득제어, 타이밍 동기, 주파수 및 시간옵셋 추정, MIMO 채널추정 등을 포함한 시스템에서 요구하는 조건을 만족시키는 훈련심볼 설계를 목표로 한다.