• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.5
• /
• pp.654-666
• /
• 2019

The tactical network has several different characteristics compared with commercial internet network such as hierarchical topology, dynamic topology changing and wireless link based connectivity. For considering IP mobility management in the tactical network, current mobility management using Mobile IP(MIP) is not suitable with some reasons such as non-optimal routing paths and single point of failure. Proxy Mobile IP(PMIP) which supporting network-based mobility in hierarchical manner can provide optimal routing path in the tactical network environment, but centralized anchor is still remained a threat to the stability of the tactical network which changes its topology dynamically. In this paper, we propose PMIP-based distributed mobility management for the tactical network environment. From our design, routing paths are always configured in optimized way, as well as path is recovered quickly when the mobility anchor of user is failed. From numerical analysis, comparing to other mobility scheme, result shows that the proposed scheme can reduce packet transmission cost and latency in tactical network model.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.3
• /
• pp.1-10
• /
• 2006

It is widely accepted that the coverage with high user densities can only be achieved with small cell such as micro- and pico-cell. The smaller cell size causes frequent handovers between cells and a decrease in the permissible handover Processing delay. This may result in the handover failure. in addition to the loss of some Packets during the handover. In these cases. re-transmission is needed in order to compensate errors, which triggers a rapid degradation of throughput. In this paper, we propose a new handover scheme in the next generation mobile communication systems, in which the handover setup process is done in advance before a handover request by predicting the handover cell based on mobile terminal's current position and moving direction. Simulation is focused on the handover failure rate and Packet loss rate. The simulation results show that our proposed method provides a better performance than the conventional method.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.12
• /
• pp.27-34
• /
• 2013

In wireless sensor networks, sensors need to communicate with each other to send their sensing data to the administration node and so they are susceptible to many attacks like garbage packet injection that cannot be prevented by using traditional cryptographic approaches. A behavior-based detection is used to defend against such attacks in which some specialized monitoring nodes overhear the communications of their neighbors to detect bad packets. As monitoring nodes use more energy, it is desirable to use the minimal number of monitoring nodes to cover the whole or maximal part of the network. The monitoring nodes can either be selected among the deployed normal nodes or differ in type from normal nodes. In this study, we have developed an algorithm for selecting the predefined number of monitoring nodes needed to cover the maximum number of normal nodes when the different types of normal nodes and monitoring nodes are deployed. We also have investigated experimentally how the number of monitoring nodes and their transmission range affect the connection ratio of the monitoring nodes and the coverage of the normal nodes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.632-637
• /
• 2019

Recent researches on autonomous driving of vehicles are becoming very active, and it is a trend to assist safe driving and improve driver's convenience. Autonomous vehicles are required to combine artificial intelligence, image recognition capability, and Internet communication between objects. Because mobile telecommunication networks have limitations in their processing, they can be easily implemented and scale using an easily expandable Wi-Fi network. We propose a wireless design method to construct such a vehicle control network. We propose the arrangement of AP and the software configuration method to minimize loss of data transmission / reception of mobile terminal. Through the design of the proposed network system, the communication performance of the moving vehicle can be dramatically increased. We also verify the packet structure of GPS, video, voice, and data communication that can be used for the vehicle through experiments on the movement of various terminal devices. This wireless design technology can be extended to various general purpose wireless networks such as 2.4GHz, 5GHz and 10GHz Wi-Fi. It is also possible to link wireless intelligent road network with autonomous driving.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.12
• /
• pp.5723-5743
• /
• 2018

The evolving internet-based services demand high-speed data transmission in conjunction with scalability. The next generation optical network has to exploit artificial intelligence and cognitive techniques to cope with the emerging requirements. This work proposes a novel way to solve the dynamic provisioning problem in optical network. The provisioning in optical network involves the computation of routes and the reservation of wavelenghs (Routing and Wavelength assignment-RWA). This is an extensively studied multi-objective optimization problem and its complexity is known to be NP-Complete. As the exact algorithms incurs more running time, the heuristic based approaches have been widely preferred to solve this problem. Recently the software-defined networking has impacted the way the optical pipes are configured and monitored. This work proposes the dynamic selection of path computation algorithms in response to the changing service requirements and network scenarios. A software-defined controller mechanism with a novel packet matching feature was proposed to dynamically match the traffic demands with the appropriate algorithm. A software-defined controller with Path Computation Element-PCE was created in the ONOS tool. A simulation study was performed with the case study of dynamic path establishment in ONOS-Open Network Operating System based software defined controller environment. A java based NOX controller was configured with a parent path computation element. The child path computation elements were configured with different path computation algorithms under the control of the parent path computation element. The use case of dynamic bulk path creation was considered. The algorithm selection method is compared with the existing single algorithm based method and the results are analyzed.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.5
• /
• pp.83-91
• /
• 2008

IISO/IEC 9594-8 defines the public key framework and attribute certificate framework. Attribute certificate framework deals with privilege management infrastructure(PMI). In PMI, for privilege management using attribute certificates, role assignment certificates and role specification certificates are used to assign and specify privileges independently. Role specification certificates includes privilege specifications and the details far privilege management of network environments. Privilege management of unreliable network environment tries to enhance the reliability and efficiency of privilege information transmission forwarding over unreliable routes in the presence of potentially faulty nodes and edges. Each node forms a role specification tree based on role specification relationship data collected from the network. In this paper privilege management cost with the role specification certificates tree structure is evaluated trying to reduce the overhead incurred by role creation and modification of privileges. The multicasting of packets are used for scalability. We establish management cost model taking into account the packet loss and node reliability which continuously join and leave for network. We present quantitative results which demonstrate the effectiveness of the proposed privilege management scheme.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.4
• /
• pp.1317-1341
• /
• 2021

Nowadays, the Internet of Things (IoT) is adopted to enable effective and smooth communication among different networks. In some specific application, the Wireless Sensor Networks (WSN) are used in IoT to gather peculiar data without the interaction of human. The WSNs are self-organizing in nature, so it mostly prefer multi-hop data forwarding. Thus to achieve better communication, a cross-layer routing strategy is preferred. In the cross-layer routing strategy, the routing processed through three layers such as transport, data link, and physical layer. Even though effective communication achieved via a cross-layer routing strategy, energy is another constraint in WSN assisted IoT. Cluster-based communication is one of the most used strategies for effectively preserving energy in WSN routing. This paper proposes a Bio-inspired cross-layer routing (BiHCLR) protocol to achieve effective and energy preserving routing in WSN assisted IoT. Initially, the deployed sensor nodes are arranged in the form of a grid as per the grid-based routing strategy. Then to enable energy preservation in BiHCLR, the fuzzy logic approach is executed to select the Cluster Head (CH) for every cell of the grid. Then a hybrid bio-inspired algorithm is used to select the routing path. The hybrid algorithm combines moth search and Salp Swarm optimization techniques. The performance of the proposed BiHCLR is evaluated based on the Quality of Service (QoS) analysis in terms of Packet loss, error bit rate, transmission delay, lifetime of network, buffer occupancy and throughput. Then these performances are validated based on comparison with conventional routing strategies like Fuzzy-rule-based Energy Efficient Clustering and Immune-Inspired Routing (FEEC-IIR), Neuro-Fuzzy- Emperor Penguin Optimization (NF-EPO), Fuzzy Reinforcement Learning-based Data Gathering (FRLDG) and Hierarchical Energy Efficient Data gathering (HEED). Ultimately the performance of the proposed BiHCLR outperforms all other conventional techniques.

• The Journal of the Korea Contents Association
• /
• v.21 no.3
• /
• pp.68-79
• /
• 2021

On the Social Internet of Things (SIoT), social activities occur through which the vehicle generates a variety of data, shares them with other vehicles, and sends and receives feedbacks. In order to share reliable information between vehicles, it is important to determine the reliability of a vehicle. In this paper, we propose a vehicle trust evaluation scheme to share reliable information among vehicles. The proposed scheme calculates vehicle trust by considering user reputation and network trust based on inter-vehicle social behaviors. The vehicle may choose to scoring, ignoring, redistributing, etc. in the social activities inter vehicles. Thereby, calculating the user's reputation. To calculate network trust, distance from other vehicles and packet transmission rate are used. Using user reputation and network trust, local trust is calculated. It also prevents redundant distribution of data delivered during social activities. Data from the Road Side Unit (RSU) can be used to overcome local data limitations and global data can be used to calculate a vehicle trust more accurately. It is shown through various performance evaluations that the proposed scheme outperforms the existing schemes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.2
• /
• pp.280-285
• /
• 2021

When VNDN technology is used as a communication technology for infotainment application services of connected vehicles, it is possible to realize data-centric networking technology in which data is the subject of communication.Vehicle security attacks and hacks, performance degradation during long-distance data transmission, and frequent data loss It is possible to innovate the limitations of the current host-oriented Internet-based infotainment application service technology of connected vehicles. The data packet forwarding issue to deliver critical information data that is very sensitive to delay in the VNDN on a push-based basis to RSU (Road Side Unit), etc. is one of the issues to be solved for realizing VNDN-based application services. We comprehensively analyze existing forwarding techniques to support push-based data traffic under the environment, and compare and analyze each technique in terms of performance.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.5
• /
• pp.11-18
• /
• 2009

Ajax based on Java Script receives attention as an alternative to ActiveX technology. Most portal sites in korea show a tendency to reopen existing services by combining the technology, because it supports most web browsers, and has the advantages of such a brilliant interface, excellent speed, and traffic reduction through asynchronous interaction. This paper modeled and implemented a multilingual meta-search service using the Ajax and open APIs provided by international famous sites. First, a Korean query is translated into one of the language of 54 countries around the world by Google translation API, and then the translated result is used to search the information of the social web sites such as Flickr, Youtube, Daum, and Naver. Searched results are displayed fast by dynamic loading of portion of the screen using Ajax. Our system can reduce server traffic and per-packet communications charges by preventing redundant transmission of unnecessary information.