• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.119-124
• /
• 2001

A new WDM-based protocol for scheduling a variable-length message is proposed in this paper. Two control slots, Pre-reservation slot and Reservation Slot, are used to coordinate transmission and diminish the collisions of packet to minimize the access delay. When there is an idle reservation slot, a control packet is transmitted on that slot and message is transferred. And the node continues to transmit its control packet through the corresponding slot every cycle, until the message is completely transmitted. If an idle reservation slot is not available, the node schedules the transmission time of message in earliest available time using Pre-reservation slots. The proposed scheduling protocol has several advantages; any new node can join the network anytime without network re-initialization. Moreover, with the pre-reservation slots, we can avoid the packet collisions and destination conflicts, and we can improve the access delay time for message transmissions.

• The KIPS Transactions:PartC
• /
• v.17C no.6
• /
• pp.451-458
• /
• 2010

To detect and recover packet losses over wireless links is very important in terms of reliability in packet transmission. Most wireless communication systems adopt an automatic repeat request (ARQ) protocol operating at link layer. However, it has been constantly addressed that the interaction not harmonized sufficiently between ARQ and TCP rather degrades TCP performance. In this paper, therefore, we propose an improved scheme from the aspect of the interaction with TCP loss recovery mechanism that can be applied to selective repeat ARQ (SR-ARQ) protocol and prove that the proposed scheme improves TCP performance significantly by OPNET simulations.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.10
• /
• pp.135-140
• /
• 2006

In this paper, we present hybrid ARQ techniques to improve the throughput performance in high speed packet transmission such as Internet or multimedia services. In order to evaluate the performance of the three different types of hybrid ARQ schemes, systemized link level simulations based on WWW traffic model are considered. In this paper, we also consider the simulated performance for an average link throughput and a normalized packet delay to compare the hybrid ARQ with link adaptation scheme in GPRS.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.807-810
• /
• 2005

Constructed network test environment of wireless base for confidentiality guarantee of data and safe transmission that is transmited at Mobile node of Wireless Network environment in this paper. And, progressed research about IKEv2's Multiple-Key Exchange mechanism for efficient security transmission that use IPSec that is built-in to basis to IPv6 of Mobile environment. Have several key to single terminal to solve that is seam at hand off packet transmission process of Mobile Node in Wireless Network and Re-setting for Key and Re-exchange problem that happen frequently and studied technology that move. Key exchange protocol that is used for an experiment loads basically in MIPv6 and used IKEv2 protocol that is used for management and distribution of reliable encryption key between both end. Using network simulator of SSFNet(Scalable Simulation Framework Network Models) in this paper Key exchange delay value of IKEv2's security transmission analyzing comparison Performance measure and studied about problem and improvement way accordingly.

• Journal of Advanced Navigation Technology
• /
• v.15 no.3
• /
• pp.386-391
• /
• 2011

CRU (contiguous resource unit) composed of adjacent OFDMA subcarriers is popularly adopted for recently developed cellular communication standards, e.g. IEEE 802.16e/m. If multiple CRUs having different SNR are assigned to a mobile station, and multiple packet streams are independently transmitted by using H-ARQ transmission, an achievable data rate can be varied according to the channel allocation method of re-transmission packets and new transmission packets. In this paper, the optimum channel allocation method for the above stated problem, and several sub-optimum channel allocation methods to reduce the computational complexity of the optimum allocation method are proposed. According to the simulation results, a sub-optimum allocation method assigning a CRU having good SNR to new transmission packet shows marginal performance loss compared with optimum method, however, the computational complexity can be significantly reduced.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.493-501
• /
• 2016

In-network storage is an effective technique for avoiding network congestion and reducing power consumption in continuous data collection in wireless sensor networks. In recent years, network coding based storage design has been proposed as a means to achieving ubiquitous access that permits any query to be satisfied by a few random (nearby) storage nodes. To maintain data consistency in continuous data collection applications, the readings of a sensor over time must be sent to the same set of storage nodes. In this paper, we present an efficient approach to updating data at storage nodes to maintain data consistency at the storage nodes without decoding out the old data and re-encoding with new data. We studied a transmission strategy that identifies a set of storage nodes for each source sensor that minimizes the transmission cost and achieves ubiquitous access by transmitting sparsely using the sparse matrix theory. We demonstrate that the problem of minimizing the cost of transmission with coding is NP-hard. We present an approximation algorithm based on regarding every storage node with memory size B as B tiny nodes that can store only one packet. We analyzed the approximation ratio of the proposed approximation solution, and compared the performance of the proposed coding approach with other coding schemes presented in the literature. The simulation results confirm that significant performance improvement can be achieved with the proposed transmission strategy.

• Journal of Internet of Things and Convergence
• /
• v.6 no.3
• /
• pp.1-6
• /
• 2020

This paper aims to integrate the previous models about mean object transfer latency in one framework and analyze the result through the computational experience. The analytical object transfer latency model assumes the multiple packet losses and the Internet of Things(IoT) environment including multi-hop wireless network, where fast re-transmission is not possible due to small window. The model also considers the initial congestion window size and the multiple packet loss in one congestion window. Performance evaluation shows that the lower and upper bounds of the mean object transfer latency are almost the same when both transfer object size and packet loss rate are small. However, as packet loss rate increases, the size of the initial congestion window and the round-trip time affect the upper and lower bounds of the mean object transfer latency.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.2
• /
• pp.115-125
• /
• 2015

This paper presents a Cuckoo search algorithm to secure adversaries misdirecting multi-hop routing in Mobile ad hoc networks (MANETs) using a robust Trust Predicated Routing Framework with an optimized cluster head selection. The clustering technique designed in this framework leads to efficient routing in MANETs. The heavy work load in the node causes an energy drop in cluster head, which leads to re-clustering of the group, and another cluster head is selected to avoid packet loss during data transmission. The problem in the re-clustering process is that the overall efficiency of the routing process is reduced and the processing time is increased. A Cuckoo search based optimization algorithm is proposed to solve the problem of re-clustering by selecting the secondary cluster head within the initially formed cluster group and eliminating the reclustering process. The proposed framework enables a node to select a reliable and secure route for MANET and the performance can be evaluated by comparing the simulated results with the AODV routing protocol, which shows that the performance of the proposed routing protocol are improved significantly.

• The KIPS Transactions:PartC
• /
• v.11C no.3
• /
• pp.379-386
• /
• 2004

The WAP 2.0 system is a newly proposed wireless communication system by the WAP Forum for interoperability across Internet environment and the system takes charge of communication between WAP terminals and existing origin Web servers. The purpose of this paper is 1) to construct a WAP 2.0 proxy proposed by the WAP Forum and 2) to improve the WAP Proxy in order to increase communication efficiency between wired and wireless communication objects. The Improved WAP proxy constructed in this study provides links between wired and wireless communication environments using the split-TCP concept. However, unlike the split-TCP connection, The improved WAP proxy maintains TCP's end-to-end semantics and reduces overhead by avoiding operations as much as possible on the upper protocol layer. In addition, The improved WAP proxy supports SACK(Selective Acknowledgement ) option and Timestamp option for speedy re-transmission which leads to reduction of performance degradation. After constructing the improved WAP proxy under Linux environment, experiments have been taken. The experimental results show that, compared with the experiments when a WAP proxy proposed by the WAP Forum is used, both data transmission delay time and data transmission size decrease to show that communication efficiency is increased. In particular, as packet missing ratio Increases, data transmission size decreases, which demonstrates that the improved WAP proxy is very effective for performance improvement in wireless communication environment.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.3
• /
• pp.24-30
• /
• 2015

Wi-Fi STAs in power saving mode described in the Wi-Fi specification can deteriorate the system performance such as throughput, time delay when they receive data frames from a Wi-Fi AP. This problem is caused by data frame reception failure due to the channel state, and it increases re-transmissions. In this paper, we propose a modified power saving mode considering fairness of Wi-Fi system in order to solve the problem. By simulation, we showed that data throughput can be increased without time delay degradation if the proposed method restricting the number of packet transmission attempts and HARQ are used.