• Journal of Korean Neurosurgical Society
• /
• 제45권3호
• /
• pp.192-195
• /
• 2009

We present a case of an acute psoas muscle hematoma following percutaneous endoscopic lumbar discectomy. A 60-year-old female who presented with far lateral lumbar disc herniation underwent endoscopic discectomy on the right side at the L4-5 level. On the second postoperative day, the patient complained of severe right flank and leg pain and her blood pressure decreased. A computed tomography scan showed a large acute psoas muscle hematoma at right L4-5 level. The patient was transfused with packed red blood cells and placed at absolute bed rest. After observing the patient in intensive care, the severe flank and leg pain subsided, but the mild back pain persisted. Although percutaneous endoscopic lumbar discectomy is an effective minimally invasive surgical technique for the treatment of lumbar disc herniation, this case highlights the inherent risks of acute lumbar segmental vessel injury.

• 한국철도학회논문집
• /
• 제13권1호
• /
• pp.78-83
• /
• 2010

포장궤도에서는 프리팩 콘크리트방식으로 도싱자갈을 충전층의 골재로 활용한다. 골재의 가장 중요한 조건은 모르터와의 부착력이며 이를 위하여 표면의 불순물을 최대한 제거하여야 한다. 국내에서 개발한 포장궤도 공법에서는 기존의 수세척방식을 대체하는 친환경 건식세척기술을 개발하였다. 건식세척은 직경 0.3~0.5mm 내외로 파쇄한 경질 재료를 고압으로 분사시켜 골재 표면을 박피시키는 방식이다. 본 논문에서는 블라스팅기술의 세척 효율을 향상시키기 위한 방안으로 현재 운용중인 장비조건하에서 분사 재료 및 시간 별 골재 잔입자 함량, 염화물 함유량, LA마모율, 압축강도시험 등을 실시하여 가장 효율적인 세척 재료 및 공정을 제시하고자 하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.26.1-26.1
• /
• 2011

We investigated the atomic layer deposition (ALD) process for nitrogen doped ZnO and the application for n-ZnO : N/p-Si (NW) coaxial hetero-junction photodetectors. ALD ZnO:N was deposited using diethylzinc (DEZ) and diluted $NH_4OH$ at $150^{\circ}C$ of substrate temperature. About 100~300 nm diameter and 5 um length of Si nanowires array were prepared using electroless etching technique in 0.108 g of $AgNO_3$ melted 20 ml HF liquid at $75^{\circ}C$. TEM images showed ZnO were deposited on densely packed SiNW structure achieving extraordinary conformality. When UV (360 nm) light was illuminated on n-ZnO:N/p-SiNW, I-V curve showed about three times larger photocurrent generation than film structure at 10 V reverse bias. Especially, at 660 nm wave length, the coaxial structure has 90.8% of external quantum efficiency (EQE) and 0.573 A/W of responsivity.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.228-228
• /
• 2006

Conjugated oligomers, used as models for fluorene-thiophene copolymers, are compared in terms of the microscopic morphology of thin deposits and the optical properties. The AFM images and the solid-state absorption and emission spectra are interpreted in line with the structural data, in terms of the assembly of the conjugated molecules. The compound with a terthiophene central unit and fluorene end-groups shows well-defined monolayer-by-monolayer assembly into micrometer-long strip-like structures, with a crystalline herringbone-type organization within the monolayers. Polarized confocal microscopy indicates a strong orientation of the crystalline domains within the stripes. In contrast, the compound with a terfluorene central unit and thiophene end groups forms no textured aggregates. The difference in behavior between the two compounds most probably originates from their different capability of forming densely-packed assemblies of ${\pi-pi}$ interacting molecules. These assemblies are used as active elements in organic field effect transistors designed by using soft lithography technique.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2008년도 학술대회 2부
• /
• pp.436-441
• /
• 2008

오늘날의 오피스 공간은 오피스 초창기에 보여지 듯 거대한 공간 안에서 동시다발적으로 일어났던 공간 구조와는 달리 개인의 업무, 공동의 업무와 상호 독립적인 업무, 그룹의 업무방법과 그룹문화, 그룹과 사람에 따라서 다르게 구성하고 있다. 이는 산업과 기술의 발달로 하여금 사용자의 오피스 공간 의식변화 및 공간 형태에서 큰 변화가 이루어짐을 의미한다. 하지만 유비쿼터스 기술의 빠른 성장은 건물 전체의 기능이나 성능, 효율과 더불어 사용자 중심의 공간의 서비스를 제공하는 지능형오피스의 기술적 공간변화로 진화되고 있다. 본 논문에서는 지능형오피스의 개념을 구체화와 사용자요구 중심의 오피스환경 연구의 일환으로 지능형오피스 서비스시나리오 구성에 대한 연구를 진행하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.295-298
• /
• 2003

Reflective mode liquid crystal on silicon (LCoS) microdisplay is the major technology that can produce extremely high-resolution displays. A very large number of pixels can be packed onto the CMOS circuit with integrated drivers that can be projected to any size screen. Large size direct-view thin film transistor (TFT) LCDs becomes very difficult to make and to drive as the information content increases. However, the existing LC alignment technology for the LCoS cell fabrication is still the mechanical rubbing method, which is prone to have minor defects that are not visible normally but can be detrimental if projected to a large screen. In this paper, application of photo-alignment to LCoS fabrication is presented. The alignment is done by three-step exposure process. A MTN $90^{\circ}$ mode is chose as to evaluate the performance of this technique. The comparison with rubbing mode shows the performance of photo-alignment is comparable and even better in some aspect, such as sharper RVC curve and higher contrast ratio.

• 한국환경과학회지
• /
• 제12권3호
• /
• pp.325-335
• /
• 2003

An agricultural land application of swine slurry is one of the best management practices in Jeju island whose ground water must be protected. So as to study the effect of appling swine slurry on ground water or aquifer, incubation-leaching technique was used by assuming the incubating period of 1, 2, 4, 8, 16, or 32 days, and application rate of 3200.0 mgT-N/$\ell$ , 820.0 mgT-P/$\ell$, and 1887.0 mgK$\^$+/$\ell$ in swine slurry. The leachates were collected from the soil columns(PVC 30 cm L${\times}$5.5 cm D) packed 15cm in depth with Gangjeong soil series by washing with 100 mL distilled water. The leached components were measured by using ion chromatography far Cl$\^$-/, NO$_3$-N, F$\^$-/, Br$\^$-/, Na$\^$+/, K$\^$+/, Ca$^2$$\^$+/, and Mg$^2$$\^$+/ , atomic absorption spectrophotometry for Fe and Mn, and UV-Vis spectrophotometry for T-N and T-p. Application of swine slurry in naked soil could influence on the ground water or aquifer by increasing nitrate-nitrogen in leachate with time, or leaching the cations present in soils in accompany with anions because of H$\^$+/produced in nitrification. Therefore, careful consideration should be taken about what amount, when, where, and how fur protecting ground water system.

• 대한기계학회논문집A
• /
• 제30권2호
• /
• pp.157-163
• /
• 2006

Our research dealt with micro fabrication using micro forming process. The goal of the research was to establish the limit of forming process concerning the size of forming material and formed shape. Flat-rolled ultra thin metallic foils of pure copper(3.0 and $1.0{\mu}m$ in thickness)and stainless steel($2.5{\mu}m$ in thickness) were used for forming material. We obtained the various shapes of micro channels as using designed forming process. $12-14{\mu}m$ wide and $9{\mu}m$ deep channels were made on $3.0{\mu}m$ thick foil and $6{\mu}m$ wide and $3{\mu}m$deep channels were made on $1.0{\mu}m$ thick foil. Si wafer die for forming was fabricated by using etching technique. And the relation of etching time and die dimension was investigated for fabricating precisely die groove. For the forming, die and metal foil were vacuum packed and the forming was conducted with a cold isostatic press. The formed channels were examined in terms of their dimension, surface qualities and potential for defects. Base on the examinations, formability of ultra thin metallic foil was also discussed. Finally, we compared the forming result with simulation. The result of research showed that metal forming technology is promising to produce micro parts.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.211-211
• /
• 2011

Nanostructures, with a diversity of shapes, built on substrates have been developed within many research areas. Lithography is one powerful, but complex, technique to make structures at the nanometer scale, such as platinum nanowires for studying CO catalytic reactions [1], or aluminum nanodisks for studying the plasmon effect [2]. In this work, we approach a facile method to construct nanostructures using noble metals on a titania thin film by using self-assembled structures as a pattern. Here, a large-scale silica monolayer is transferred to the titania thin film substrates using a Langmuir-Blodgett trough, followed by the deposition of a thin transition metal layer. Owing to the hexagonal close-packed structure of the silica monolayer, we would obtain a metal nanostructure that includes separated metallic triangles (islands) after removing the patterning silica beads. This nanostructure can be employed to investigate the role of metal-oxide interfaces in CO catalytic reactions by changing the patterning silica particles with different sizes or by replacing the oxide support. The morphology and chemical composition of the structure can be characterized by scanning electron microscopy, atomic force microscopy and X-ray photoelectron spectroscopy. In addition, we modify these islands to a connected island structure by reducing the silica size of the patterning monolayer, which is utilized to generating hot electron flow based on the localized surface plasmon resonance effect of the metal nanostructures.

• Journal of Pharmaceutical Investigation
• /
• 제26권1호
• /
• pp.55-59
• /
• 1996

The crystal structure of diflunisal, 2',4'-difluoro-4-hydroxy-3-biphenyl-carboxylic acid, was determined by single crystal X-ray diffraction technique. The compound was recrystallized from a mixture of acetone and water in monoclinic, space group C2/c, with $a\;=\;34.666(6),\;b\;=\;3.743(1),\;c\;=\;20.737(4)\;{\AA},\;{\beta}=\;110.57(2)^{\circ}$, and Z = 8. The calculated density is $1.324\;g/cm^3$. The structure was solved by the direct method and refined by full matrix least-squares procedure to the final R value of 0.045 for 1299 observed reflections. It was found that the molecules in the crystal are partially disordered, that is, the two equivalent conformers $(180^{\circ}$ rotated ones through C(1)-C(7)) are packed alternatively without regular symmetry or sequence. The two phenyl rings of the biphenyl group is tilted to each other by the dihedral angle of $43.3^{\circ}$. The carboxyl group at the salicylic moiety is just coplanar to the phenyl ring, and the planarity of this salicylic moiety is stabilized by an intramolecular hydrogen bond of O(3)-H(O3) O(2). The molecules are dimerized through the intermolecular hydrogen bonds at the carboxyl group in the crystal.