• New & Renewable Energy
• /
• v.1 no.4 s.4
• /
• pp.43-48
• /
• 2005

This study presents the integrated modeling approach to simulate the proton exchange membrane [PEM] fuel cell system for vehicle application. The fuel cell system consisting of stack and balance of plant (BOP) was simulated with MATLAB/Simulink environment to estimate the maximum system power and investigate the effect of BOP component sizing on system performance and efficiency. The PEM fuel cell stack model was established by using a semi-empirical modeling. To maximize the net efficiency of fuel cell system, multi-variable optimization code was adopted. Using this method, the optimized operating values were obtained according to various system net power levels. The fuel cell model established was co-linked to AVL CRUISE, a vehicle simulation package. Through the vehicle simulation software, the fuel economy of fuel cell powered electric vehicle for two types of driving cycles was presented and compared. It is expected that this study can be effectively employed in the basic BOP component sizing and in establishing system operation map with respect to net power level of fuel cell system.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.3
• /
• pp.224-229
• /
• 2009

An experimental study was conducted to investigate the effects of turtle neck syndrome, so called, on muscular fatigue and muscle activity. Six subjects (males) participated and performed the prolonged casual computer work in the study. EMG signals from six muscles of the dominant neck-back region were acquired and recorded for 10 seconds at the beginning and the end of three hours computer work. EMG was recorded from six muscles by using a computerized data recording and analysis system. Power spectrum function of EMG was calculated off-line by means of a signal processing software package. Power spectrum functions were smoothed with a moving average filter of 21 points and normalized with respect to the maximal value achieved during the trials. Muscle activity and median frequencies of Sternocleidomastoid(SCM) in turtle neck posture was approximately 51%, which were less than those in normal neck posture. SCM also showed the biggest decrease in median frequency. Results will provide the insight into the neck-back injury mechanism of turtle neck patients. Furthermore, they will be helpful in developing rehabilitation programs for restoring patients' neck-back functions.

• The Journal of Korean Physical Therapy
• /
• v.23 no.2
• /
• pp.23-29
• /
• 2011

Purpose: The purpose of this study was to determine whether there is a relationship between strength balance and joint position sense related to the ankle joint in healthy women. Methods: Twenty-six healthy women were recruited. Isokinetic strength and joint position sense (JPS) were measured using a Biodex System 4 pro Dynamometer and a Biodex Advantage Software Package. Prior to measuring the JPS and isokinetic strength, the dominant foot was determined according to the Waterloo Footedness Questionnaire. After the JPS test, isokinetic strength was evaluated in velocity $60^{\circ}s$, including practice trial ($90^{\circ}s$). Using the measured isokinetic strength, a Strength Balance Index (SBI) was calculated. Results: Relative to the SBI, the degree of imbalance was varied; but there were imbalances. For each starting position, JPS error showed no significant differences (p>0.05). The relationship between SBI and JPS was found during the inversion to eversion process, eversion to inversion, and dorsi flexion to plantar flexion. Conclusion: There are moderate to mild relationships between JPS and SBI during ankle movement. It is suggested that to prevent ankle injuries, strength balance should be considered along with the other potential factors including anatomical alignment, proprioception, and soft tissues problems.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.12 s.105
• /
• pp.1347-1354
• /
• 2005

The free vibration characteristics of Al cantilever square plates with a brass inclusion were analyzed experimentally and numerically The experimentally obtained natural frequencies and mode shapes were compared with the FEM analysis results. The impulse exciting method was used for experiment and ANSYS software package was used for FEM analysis. The natural frequencies obtained iron experiment and numerical analysis matched within $0\%$. It was found that the natural frequencies of the Al cantilever square plates with a brass inclusion decrease as the size of inclusion increases. For the third mode shape, comparing the nodal line of the Al plate and the Al plate with a inclusion, the mode shape showed the reversed quadratic curve. The natural frequencies of inclusion plate were decreased as the location of inclusion moves from the clamped edge to the tree edge.

• The Journal of the Korea Contents Association
• /
• v.12 no.2
• /
• pp.60-68
• /
• 2012

This paper describes design and implementation of a distributed rendering management system using existing rendering module. Currently, most of 3D commercial software provide modeling, rendering and distributed environment in the whole package. So, the server and client should use the given renderer as is, without the required features. In this paper, we propose a distributed rendering management system that consist of rendering module and distributed rendering client-server. The rendering module can be executed independently and managed by the distributed rendering client. The server requests rendering for each connected client. After the execution, the server gathers rendering result from each client. After gathering, the server provides the rendering result to the user.

• Progress in Superconductivity and Cryogenics
• /
• v.4 no.2
• /
• pp.73-77
• /
• 2002

In order to derive the detailed design of Thermal Shield Cryopanel. which plays a role to make the Tokamak Nuclear Fusion Equipment work at both static and efficient conditions the commercially available software package FLUENT Version 5.3, was utilized. This study investigated the effects of thermal sources and distributions on the temperatures of Lid. Body. Base. and EH-Port Cryopanel by the numerical technique whose grid generations cover the solid and 9as region of the panel. The physical model of the Thermal Shield Cryopanel is that the 10mm diameter of the pipe with 1mm thickness is soldered on the Stainless steel Panel with 4mm thickness. The heat fluxes to the panel are assumed to be by thermal radiation in the vacuum space and by conduction through the supporters. The inlet conditions of Helium gas are 20 atmospheric Pressures and 60K temperature. The panel shapes with cooling Pipes and the operational conditions to keep appropriate temperature distribution of Thermal Shield Cryopanel Have been found and suggested.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.4
• /
• pp.376-380
• /
• 2008

The optical properties of multi layered thin films with $Sb_2O_3/Na_3AlF_6/Sb_2O_3/Cr$ were simulated by using EMP(Essential Macleod Program). EMP is a comprehensive software package to design and analyse the optical characteristics of multi-layered thin film. $Sb_2O_3$ and $Na_3AlF_6$ were selected as a high refractive index and low refractive index material respectively. Additionally Cr was chosen as mid reflective material. Optical properties including color effect were systematically studied in terms of different optical thickness of low refractive index material. The optical thickness of $Na_3AlF_6$ was changed as 0.25, 0.5, 0.75 and $1.0\lambda$. The film with 0.25, 0.5, 0.75 and $1.0\lambda$ of optical thickness showed mixed color range between purple and red range, yellowish green and bluish green, purple and mixed color range of green and purple respectively.

• Nuclear Engineering and Technology
• /
• v.37 no.3
• /
• pp.259-264
• /
• 2005

This paper presents a vital area identification (VAI) method based on the current fault tree analysis (FTA) and probabilistic safety assessment (PSA) techniques for the physical protection of nuclear power plants. A structured framework of a top event prevention set analysis (TEPA) application to the VAI of nuclear power plants is also delineated. One of the important processes for physical protection in a nuclear power plant is VAI that is a process for identifying areas containing nuclear materials, structures, systems or components (SSCs) to be protected from sabotage, which could directly or indirectly lead to core damage and unacceptable radiological consequences. A software VIP (Vital area Identification Package based on the PSA method) is being developed by KAERI for the VAI of nuclear power plants. Furthermore, the KAERI fault tree solver FTREX (Fault Tree Reliability Evaluation eXpert) is specialized for the VIP to generate the candidates of the vital areas. FTREX can generate numerous MCSs for a huge fault tree with the lowest truncation limit and all possible prevention sets.

• Korean journal of food and cookery science
• /
• v.7 no.3
• /
• pp.61-68
• /
• 1991

The purpose of this study was to develop a computerized menu planning for military who need balanced diet for 365 days so that more effective and efficient food service can be provided. For this purpose, the evaluation of current military menu planning and production management system was carried out and the result was being applied to the computerized memo planning program which was being developed on this study. The contents of the computerized programs developed for this study were summerized as follows: 1) Programs for calculating nutrient value of foods and standarized meals. 2) Programs for outputing of meal table by a day or month. 3) Programs for outputing standardized recipes. 4) Programs for calculating nutrient value per day. 5) Programs for outputing one-sowing, one hundred-serving size and price. 6) Programs for calculating average of nutrient value by monthly and yearly. 7) Programs for calculating average of the amount used for a year. The personal computer type IBM PC-AT was used for the development of the software for this programs. Also, a work performance file was made by using the DBase III plus package.

• Journal of Korean Society for Atmospheric Environment
• /
• v.12 no.4
• /
• pp.399-406
• /
• 1996

Acidic fog is catastrophic to aviation and potentially affect materials, vegetation, crops and public health. This paper was carried out to investigate the chemical features of fog sample at Mt. Sobaek (mean sea level : 1, 340m) from June to August 1995. Each sample was analyzed for pH, electrical conductivity and major ions (anion : $Cl^N)_3^-, SO_4^{2-}, cation : Na^+, NH_4^+, K^+, Mg^{2+}, Ca^{2+}$) by ion chromatography. The quality analysis of fog sample data was performed based on ion balance and electrical conductivity method. The wind directions are subdivided into the northerly and southerly wind according to the wind direction data at the Sobaek-san meteorological observation station. Statistical analyses were performed on the complete set of results in order to obtain a description of fog sample. All the statistical treatment was carried out using the SPSS/PC + software package. The major ion concentration of fog samples was higher for the northwesterly wind cases than sourtheasterly wind cases. The pH of fog sample varied between 2.95 and 6.08. The average pH and electrical conductivity of total sample (n=210) were 4.39 and 113.0 $\mu$S/cm, respectively. It may be noted that in nearly all the cases, the dominant major ions in the fog sample at Mt. Sobaek were $SO_4^{2-}, NO_3^-, H^+ and NH_4^+$.