• Journal of Nutrition and Health
• /
• 제45권6호
• /
• pp.577-587
• /
• 2012

This study was conducted to investigate the consumption pattern and perception of traditional soy sauce and soybean paste products in male and female adults aged 19 and over in Seoul and Gyeonggi-do areas in order to promote the development of the products' industry. The survey was conducted between October 1 to October 15, 2011 among 294 male and female adults aged 19 years and over in Seoul and Gyeonggi-do areas. The gender distribution of the subjects was 33.3% males and 66.7% females. For a perception on traditional dietary life, the degree for enjoying meals with cooked rice as the staple food revealed that 32.3% of the subjects responded 'strongly agree'. The intake frequency of traditional soy sauce and soybean paste products in the subjects of the study showed that in the case of doenjang, 49.7% of the participants consumed it twice a week and 21.4% consumed it once a week. For gochujang, 59.9% consumed it twice a week and 19.0% consumed it once a week. The perception on the preparation method for traditional soy sauce and soybean paste products showed a low level for traditional soy sauce and soybean paste products. The reason for purchasing traditional foods showed that 77.6% of the subjects made purchases for convenience and 8.2% purchased it for its small package. For the subjects, the priority for purchasing traditional soy sauce and soybean paste products was as follows: in the first rank, ingredients & origin made up 33.7% and price comprised of 26.2% of the priority. Regarding satisfaction for soy sauce and soybean paste products in the market, the degree of satisfaction was high for gochujang. With regard to gender difference, female subjects showed a significantly lower satisfaction for cheonggukjang and kuk-ganjang, and a significantly higher satisfaction for chin-ganjang, compared to the male subjects. The results of the study depicted that consumer's requirement was high for traditional soy sauce and soybean paste products in the market, particularly for the safety of the products in the market. Consumer satisfaction was relatively positive yet, some efforts are needed in order to improve the quality of cheonggukjang and kuk-ganjang.

• Journal of Animal Science and Technology
• /
• 제44권5호
• /
• pp.507-518
• /
• 2002

가축 육종 체계 또는 선발방법의 상호 비교를 할 수 있도록 다형질 컴퓨터 모의실험을 위한 확률모형을 개발하고, 기존 연구결과로부터 얻어진 평균과 상가적 유전효과 및 잔여오차의 분산 및 공분산 값을 실험 모수로 사용하여 모의실험 축군을 생성하였고, 선발방법은 임의교배, 표현형가, 참육종가 및 추정육종가에 의한 선발 중에서 선택할 수 있도록 하였다. 개체의 육종가는 MTDFREML package를 사용하여 추정하였다. 모의실험 프로그램의 정확성을 검증하기 위하여 크기가 다른 세 축군을 20년간 임의교배하여 모의실험한 결과, 평균값과 분산 및 공분산 값은 모의실험 모수로 주어진 값과 비슷하였고, 축군의 크기가 클수록 모의실험 모수로 주어진 값에 더욱 근접하였으며 표준오차가 작아졌다. 임의교배를 계속함에 따른 근교계수와 축군 평균 및 분산의 변화를 확인하기 위하여 종모우 1두, 종빈우 10두를 유지하는 소축군 10개를 500년간 모의실험 한 결과, 근교계수의 변화는 이론적 추정함수와 비슷하였으며, 평균값은 작은 축군에서 세대에 따라 임의부동현상을 보였지만 근교계수가 증가하여 1에 가까워지면 일정한 값으로 수렴하였다. 축군내 분산은 근교계수의 증가에 따라 감소하였다. 이상의 결과를 보면, 모의실험 모형에 의해 생성된 축군의 자료는 모의실험 모수와 같은 통계적 특성을 유지하는 것으로 사료된다.

• 유통과학연구
• /
• 제11권6호
• /
• pp.31-40
• /
• 2013

Purpose - The Northeast Asian Logistic Hub strategy was established to create a national competitive advantage in northeast Asia. Countries in this region are competing fiercely to become the central base distribution port as the volume of container shipping continues to increase due to the northeast Asian (especially Chinese) economic growth. The primary method by which shippers are improving their customer service and distribution is enhancing profits by minimizing call ports on the key route through strategic affiliations and the use of large vessels. Each nation is planning large-scale investments in the construction of sea ports that can accommodate large vessels. This paper proposes ways by which the logistical strategies of domestic corporations can keep pace with changes in government policy concerning the Northeast Asian Business Hub policy. It examines the logistics system in the Northeast Asian region, analyzes the government's Northeast Asian Business Hub policy, and suggests logistical strategies for domestic corporations through an analysis based on a questionnaire designed to grasp domestic firms' needs and goals. Research design, data and methodology - The purpose of this study is to determine how shipping companies establish partnerships with third-party logistics providers and draws out the implications of the results. The survey methods used were personal interviews and questionnaires distributed to a sample population through e-mail, fax, mail, and telephone. A total of 600 questionnaires were distributed, of which 165 were returned. Among these, ten were excluded due to insufficient content; ultimately, 155 were used for the sample. The statistical data collection process was analyzed through data coating and a statistical package program. Results - This study argues that greater flexibility in policies, administration, and systems will be needed to significantly improve established business practices. In this dissertation, we primarily identify that in order to become a center of northeast Asian logistics, Korea must adopt a new paradigm and abandon the existing systems that are based on the economic and social systems that have stemmed from bureaucracy, inflexibility, chauvinism, and equalitarianism. Flexible policies, administration, and systems will be necessary to improve business practices. Domestic corporations must establish a strategic logistics hub and related network while simultaneously pursuing value-added logistics businesses by increasing their manpower and building a logistics information system. This will strengthen their competitive edge and lead to system improvements. Conclusions - Domestic corporations must adopt a new paradigm and use more reasonable business laws, systems, and policies that are based on market-driven flexibility and transparency. Moreover, social norms and regulations should be established to help ensure political and social security. Korea must also develop a culture of tolerance for foreign companies. Finally, the paradigm defining the policy governing the development of the capital city and its satellite cities in this context must be changed.

• 유통과학연구
• /
• 제15권2호
• /
• pp.79-90
• /
• 2017

Purpose - Cargo Distribution O2O Business Model is the form of business that connects the cargo and empty cargo-truck based on mobile online platform. In Korean cargo distribution market, FIN(Freight Information Network) is the only model that represents O2O Business Model. The purpose of this paper is investigating the recognition of driver who is the only source of income toward cargo distribution O2O Business Model, and based on the investigated recognition of trucker, suggesting strategic implication. Research design, data, and methodology - PESTLE methodology which is massive environment analysis, and 5 Forces Model when analyze the present and future of cargo distribution O2O business market of industrial structure analysis were used as investigation methodology. Also structured questionnaire was used for trucker's recognition investigation. Based on collected 196 structured effective questionnaires organized with 26 questions were analyzed using statistics package. Results - 51.3% of responded driver is non-differentiated, deprofessionalize form that transport all types of cargo. 95.4% recognize cargo distribution O2O Business Model, FIN is needed, especially during back-hall(94.7%). As a payment method, monthly due is preferred(73%), but it is also needed to pay annual due and pay whenever cargo and cargo-truck are connected(24.5%). Trucker prefer FIN operation corporation which has rich supply(85.2%), and is liberal in supply in any domestic area(75.5%). Conclusions - First, 91% was the member of FIN, and 95% of non-member recognized FIN is needed. 83% of them has the intent to be the member of FIN. Second, besides of monthly due as payment method of FIN, 25% has positive recognition toward new payment method. The new payment method means paying annual due and pay whenever cargo and cargo-truck are connected. Third, because of information imbalance about the cargo and cargo-truck among, operators whose business goal is FIN, it was investigated that transportation fee is low and commission charge of broker is high. The core of Korean Cargo Distribution O2O Business Model, FIN, is online platform that matches cargo and cargo-truck. Therefore, FIN operator should minimize the amount of single transportation of trucker. This study suggests the development of shipper using FIN, diversify distribution channel, suggesting backhaul toward trucker as solution to FIN operator.

• 한국멀티미디어학회논문지
• /
• 제7권3호
• /
• pp.368-376
• /
• 2004

본 논문에서는, 현재 윈도우즈 미디어 기술(Windows media technology)이 스트리밍 미디어를 작성, 배포, 재생할 수 있도록 구성 된 포괄적인 개발 도구이기는 하지만 프로그램 기능상의 고난도로 인하여 일반 사용자들이 쉽게 접근하지 못하는 점을 고려, 쉽게 스트리밍 미디어를 작성 할 수 있게 해주는 저작도구를 개발한 내용을 소개한다. 기존의 마이크로소프트사의 ASF(Advanced Systems Format) 저작도구는 사용자가 직접 삽입 시간을 입력해야 하고 ASX(ASF Stream Redirector) 파일을 저작하려면 별도의 응용프로그램을 사용해야 했다. 본 저작도구는 ASF 파일 제작시 사용자의 입력을 최소화하기 위해 마커와 스크립트 커맨드 정보입력 인터페이스를 쉽게 접근할 수 있도록 설계하였으며 마커와 스크립트 커맨드의 삽입을 간단히 마우스의 조작만으로 시간과 위치를 계산할 수 있는 기능을 구현하였다. 또한, ASX 파일 생성 마법사를 사용하여 ASX 파일을 직접 코딩하지 않고도 사용자가 원하는 기능으로 ASX 파일을 저작할 수 있으며, 최종적으로 템플릿을 이용하여 ASF, ASX파일이 삽입된 웹 페이지를 간단히 생성할 수 있고 생성과 동시에 브라우저에서 확인할 수 있는 기능을 구현하였다. 본 저작도구의 장점 은 ASF 파일의 마커와 스크립트 커맨드를 편리하게 삽입하고 편집할 수 있는 InfoSlider와 자신이 원하는 템플릿을 선택할 수 있는 ASX 파일 생성 마법사를 활용하여 윈도우즈 미디어 기술에 대한 지식이 없는 사용자들도 멀티미디어 컨텐트를 손쉽게 저작할 수 있게 해주는 점이다.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2004년도 춘계학술발표회
• /
• pp.43-48
• /
• 2004

교통체계의 발달은 지리공간 위에서 시간거리와 비용거리를 단축시켜 시공간과 비용공간의 상대적 수렴을 가져온다. 고속도로와 고속철 둥 사회간접자본시설은 지역발전에 절대적인 파급효과를 미친다. 목포는 서해안고속도로와 호남고속철도의 영향권 내 지역으로서, 여름휴가철(성수기) 외지의 관광객은 목포와 같은 항구도시를 찾지만, 연안여객선의 수용능력이 관광객(도착차량)의 수를 포용하지 못하므로 balking현상이 발생한다. 이 연구에서는 ARENA의 개념과 속성을 이해하고 목포항 연안여객선 운영현황 시뮬레이션을 통하여 balking의 진상을 면밀히 분석, 연안도로의 정체현상 해결을 위한 효율적인 여객선 운영방안을 모색하고자 한다. 이 논문은 고속도로와 고속철의 영향권 테에 있는 항구도시의 경제부흥에 일조 할 수 있다는 정성적 효과를 제시하는데 의의가 있다.

• 한국방재학회 논문집
• /
• 제10권3호
• /
• pp.31-38
• /
• 2010

본 연구에서는 교량 구조물-궤도 종방향 상호작용, 교량 구조물-차량 상호작용을 고려한 신뢰성 최적설계 방법을 제안하고, 알고리즘의 개발을 통하여 본 연구에서 제안한 방법의 효율성을 검증하였다. 구조해석 프로그램은 ABAQUS를 사용하였으며, 최적화 방법은 Automated Design Synthesis(ADS)에서 신뢰성면에서 우수한 ALM-BFGS방법을 사용하였다. 일반적으로 ALM-BFGS방법은 최적해 방향을 탐색하는데 있어 1방향 탐색을 하지 않으며 Push-Off Factor 값이 보통 0.1~0.2에서 대부분 수렴하나 본 연구에서는 'Heuristic Decision Method' 의하여 결정된 Push-Off Factor 값이 90일 때 1방향 탐색인 Golden Section Method의 적용이 필요하였으며, 알고리즘이 잘 수렴함을 확인하였다. 구조물-궤도 종방향 상호작용, 구조물-차량의 상호작용에 의한 응답을 제약조건으로 설정하여 단면 설계시 반영될 수 있도록 하였다. 본 연구는 구조물-궤도 종방향 상호작용 및 구조물-차량 상호작용을 고려한 설계기법에 대한 효율성 및 경제성을 증명하기 위하여 5${\times}$(1@50m) 2주형 강합성 거더교에 대한 최적설계를 수행하였으며, 본 연구에서 제안하는 상호작용을 고려하는 설계기법이 기존의 상호작용을 고려하지 않은 설계방법보다 경제적이며 효율적임을 확인하였다.

• 대한의용생체공학회:의공학회지
• /
• 제38권6호
• /
• pp.277-284
• /
• 2017

This paper presents an implantable pH measurement electrode for wireless gastroesophageal reflux measurement. Usually, gastroesophageal reflux is diagnosed by a catheter-type wire connection between the esophagus and the diagnostic device which brings many side effects such as restriction of daily living, pain, and discomfort in the nasal cavity and pharynx of patients. In order to solve these issues, researchers have been studied a wireless measurement method and a micro-sized pH electrode for human body insertion is necessary. Commercial glass packaged pH meter is formed by a sensing and a reference electrodes in a KCl solution. However, if the glass meter is inserted into the human body, there are risks of leakage of the solution, breakage of the glass package, injury of the body elements. Therefore, the solution should be solidified on the micro-sized noble metal wire which has a characteristic of biocompatible. After solidified wire fabrication, the designed meter was tested for feasibility of measurement and the result was well agreed with pH values of commercial pH meter. Potentials in pH 1 to 12 solution was measured to obtain the sensitivity of the sensor with linearity. And we have designed a simulation of gastroesophageal reflux with symptom frequency, interval, and duration time in pH 2 solution. The proposed sensor has capable to get the same potential for 24 measurements in 3 days, and it has sensed same pH values of 2 for one hour with every 10 minutes. Furthermore, the sensor was survived for 48 hours with reasonable potentials in the acid solution.

• Journal of Nutrition and Health
• /
• 제39권4호
• /
• pp.417-425
• /
• 2006

The purpose of this study were to a) investigate operation of human resource in contract foodservice management company (CFMC), b) identify the staffing indices for the establishment an labor productivity for CFMC, and c) develop standardized model of staffing demand as foodservice's scale in CFMC. The data was collected using FS intra-net system from 138 contract-managed foodservice operations in A CFMC and statistical analysis was completed using the SAS/win package (ver. 8.0) for description analysis, ANOVA, Duncan multiple comparison, pearson correlation analysis, and regression analysis. The types of operation were included factory (45%), small scale operation (26%), office (11%), department store (10%), training institute (4%), and hospital (3%). The distribution of foodservice scale was classified by meal served was as follows; 'less than 500 meals (47%)', 'from 500 to 1500 meals (25%)', 'from 1500 to 2500 meals (17%)', and 'more than 2500 meals (12%)'. There was two types of contract method, fee-contract (53%) and profit-and-loss contract (46%) Some variables were significantly high operation indices such as selling price, food cost, monthly sales, net profit and others were significantly low operation indices such as labor, meal time a day in the small foodservice on meal scale (p<.001). The more foodservice was large, the more human resource was disposed on dietitian, cook, cooking employee altogether (p<.001). Foodservice in A CFMC was divided into 2 groups by 500 meals a day, according to comparative analysis of labor productivity as meal scale per working hour, meal scale a day and operation indices as meal per foodservice employee, meal per cooking employee (p<.001). The regression equation model was developed as 'the number of employees=1.82+0.014 ${\times}$ meal served' in the operation of less than 500 meals, 'the number of employees=9.42+0.013 ${\times}$ meal scale a day -0.94 ${\times}$ meal scale per working hour' in the operation over 500 meal scale using labor productivity indices and operation indices. Therefore, CFMC could be enhanced efficiency of human resource arrangement using the standardized model of staffing demand and would be increased effectiveness of profit.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.450-455
• /
• 2002

Cu-cored Sn-Ag solder balls were fabricated by coating pure Sn and Ag on Cu balls. The melting behavior and the solderability of the BGA joint with the Ni/Au coated Cu pad were investigated and were compared with those of the commercial Sn-Ag and Sn-Ag-Cu balls. DSC analyses clarified the melting of Cu-cored solders to start at a rather low temperature, the eutectic temperature of Sn-Ag-Cu. It was ascribed to the diffusion of Cu and Ag into Sn plating during the heating process. After reflow soldering the microstructures of the solder and of the interfacial layer between the solder and the Cu pad were analyzed with SEM and EPMA. By EDX analysis, formation of a eutectic microstructure composing of $\beta$-Sn, Ag$_3$Sn, ad Cu$_{6}$Sn$_{5}$ phases was confirmed in the solder, and the η'-(Au, Co, Cu, Ni)$_{6}$Sn$_{5}$ reaction layer was found to form at the interface between the solder and the Cu pad. By conducting shear tests, it was found that the BGA joint using Cu-cored solder ball could prevent the degradation of joint strength during aging at 423K because of the slower growth me of η'-(Au, Co, Cu, Ni)$_{6}$Sn$_{5}$ reaction layer formed at the solder, pad interface. Furthermore, Cu-cored multi-component Sn-Ag-Bi balls were fabricated by sequentially coating the binary Sn-Ag and Sn-Bi solders on Cu balls. The reflow property of these solder balls was investigated. Melting of these solder balls was clarified to start at the almost same temperature as that of Sn-2Ag-0.75Cu-3Bi solder. A microstructure composing of (Sn), Ag$_3$Sn, Bi and Cu$_{6}$Sn$_{5}$ phases was found to form in the solder ball, and a reaction layer containing primarily η'-(Au, Co, Cu, Ni)$_{6}$Sn$_{5}$ was found at the interface with Ni/Au coated Cu pad after reflow soldering. By conducting shear test, it was found that the BGA joints using this Cu-core solder balls hardly degraded their joint shear strength during aging at 423K due to the slower growth rate of the η'-(Au, Cu, Ni)$_{6}$Sn$_{5}$ reaction layer at the solder/pad interface.he solder/pad interface.