• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2008.04a
• /
• pp.373-376
• /
• 2008

본 논문은 퍼지 펄스 폭 변조 (Pulse-width-modulation: PWM) 시스템의 안정도에 대해 다루게 된다. 복잡성을 가진 비선형 시스템은 Takagi-Sugeno (T-S) 퍼지 모델에 의해 효율적으로 논의될 수 있다. 본 논문에서는 기존의 LTI 시스템에서 논의 되었던 PWM 제어기 설계 문제를 퍼지 시스템으로 확장시킴으로써 PWM 제어기에 대한 논의의 저변을 확대시키고자 한다. 또한, 리아푸노프 (Lyapunov) 안정도에 기반 한 안정도 증명을 통해 퍼지 PWM 시스템의 안정도를 분석하고자 한다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.3
• /
• pp.179-185
• /
• 2008

In this paper, an advanced torque control scheme of SRM using DITC(Direct Instantaneous Torque Control) and PWM(pulse width modulation) is presented. Different from conventional DITC method, proposed method uses one or two switching modes at every sampling time, instead of only one switching mode. The duty ratio of the phase switch is regulated according to the torque error and simple control rules of DITC. Moreover the sampling time of control can be extended, which allows implementation on low cost micro-controllers. A simple calculation of PWM can assure a constant switching frequency with an excellent control performance. The proposed control method is verified by the simulations and experimental results.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.239-241
• /
• 2020

MSIS(Modular Scalable Inverter System)에서 모터 구동 시 발생하는 고주파 성분의 순환 전류는 구동 시스템의 효율 및 신뢰성을 저하시키기 때문에, 이를 저감하기 위한 PWM(Pulse Width Modulation) 동기화 기법의 구현이 필수적으로 요구 된다. 본 논문은 MSIS에서 PWM 동기화 기법을 적용하기 위한 모터 구동 인버터용 제어보드의 설계에 관한 것이다. 제어보드 간 PWM 동기화 기법을 적용하기 위해 DSP(Digital Signal Processor)의 EPWMSYNC를 활용하였다. EPWMSYNC은 서로 다른 DSP간 PWM의 위상을 동기화하는 기능으로 DSP의 EPWMSYNCO과 EPWMSYNCI를 사용한다. 설계한 제어보드는 EPWMSYNC 신호를 광케이블을 통해 다른 제어보드로 연결할 수 있도록 설계하여, 제어보드 간의 절연과 잡음의 영향을 최소화했다. 본 논문에서 설계한 제어보드의 EPWMSYNC를 시험하였으며, 600W급 IPMSM(Interior Permanent Magnet Synchronous Motor)을 부하로 사용하는 시스템에서 설계된 제어보드의 유효성을 검증하였다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.1
• /
• pp.92-97
• /
• 2005

This paper discusses an intelligent digital redesign technique for designing a fuzzy pulse-width-modulated (PWM) control. First when we are given a well-designed fuzzy analog control, the equivalent digital control is intelligently redesigned. Using the similar technique we intelligently redesign the fuzzy PWM control from the intelligently redesigned fuzzy digital control. A stabilizability of the intelligently redesigned PWM control is rigorously analyzed.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.6
• /
• pp.561-568
• /
• 2003

There arc two ways in the output voltage control method in PWM inverters. One Is double loop voltage control composed of inner current control loop and outer voltage control loop.'rho other is single loop voltage control method composed of voltage control loop only. It's characteristics shows lower performance in case of high output impedance than double loop voltage control. However, in case of low output impedance, it shows good control performance in all load ranges than double loop voltage control. In this paper, the rule and the gain of single loop voltage control have been developed analytically and these were verified through computer simulation and experiment.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.548-549
• /
• 2010

LED의 조도제어 방식은 타 방식에 비해 비교적 광색의 변화가 작고, 선형적인 조도제어가 가능한 PWM 방식을 사용한다. 본 논문은 LED를 PWM 방식으로 조도제어 했을 때, PWM 주파수에 의해 변화 하는 LED의 특성변화를 최소화하도록 주파수를 선택하는 방법을 제안하였으며, 이를 실험적으로 검증하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.5
• /
• pp.1117-1125
• /
• 2000

A current mode PWM method applied one cycle response to averaging circuit model Buck converters is presented. The controller nonlinear PWM implement is based on the error between the switched variable and the response reference to zero each cycle. As the result, the system transfer function is derived as a function of the desired close loop poles, simplifying the design procedure and bringing forward all the important characteristics of the close loop system. The proposed controller has significant advantages over conventional current mode control methods in noise susceptibility, dynamic response and without inductor current sensing, Finally, the simulation and experiment results confirm the proposed PWM control techniques.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.4
• /
• pp.381-389
• /
• 2004

In this paper, it is suggested that instantaneous compensation PWM control for inverter without the smoothing capacitor Therefore, this inverter system has several advantages. It has small volume and low price to manufacture, decrease trouble rate of inverter, and has power factor correction effect because huge smoothing capacitor-less. And it has compact size control circuit to use analog integrator device. It could make the smoothing capacitor-less inverter for air-blower motor by using the instantaneous compensation PWM controller. This inverter system has small volume and value compare with the conventional VVVF control inverter.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.502-503
• /
• 2014

HEV를 구동시키는 인버터 시스템은 고정 주파수로 스위칭하는 PWM(Pulse Width Modulation)방식으로 구동이 된다. 고정주파수를 이용한 PWM은 전류제어의 주기가 일정하기 때문에 디지털 화가 쉬운 장점을 가지고 있다. 하지만 그로인한 특정 주파수 부분에 고조파가 생성이 되게 되는데 이 고조파로 인해 소음이 유발된다. 하지만 이 소음을 억제하기 위해서 랜덤PWM을 사용하게 되면 전류 제어가 고정주파수로 스위칭하는 PWM에 비해서 완벽하게 되기가 어렵다. 따라서 본 논문에서는 HEV의 소음을 저감시키면서 동시에 전류제어도 가능한 랜덤PWM기반의 전류제어 방법을 연구하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.4
• /
• pp.617-624
• /
• 2023

Recently, miniaturization and low power consumption of electronic products and improved efficiency and power factor improvement have become a matter of great interest. In this paper, an AC-DC converter based on PWM control was designed and made. The AC-DC converter is designed with a structure in which one rectifier circuit and one output voltage control circuit are connected in series. The rectifier circuit is a diode-based single phase full-wave current circuit and the output voltage control circuit is a DC-DC conversion circuit based on PWM control. Arduino was used as the main control device for PWM control, and LCD was configured at the output stage so that the control result could be checked. The error between the output voltage displayed on the oscilloscope and LCD and the target output voltage was confirmed through repeated experiments with the test circuit, and the validity of the proposed design methodology was confirmed by showing an error rate of about 5% based on the oscilloscope measurement value.