• 분석과학
• /
• 제25권6호
• /
• pp.395-401
• /
• 2012

본 연구에서는 PVC 제품에 잔류하는 염화비닐 단량체(VCM)에 대한 정량분석방법을 제시하였다. 용출용매의 경우, 에탄올, THF, 아세톤에서 유사한 추출효율을 나타내었으나, 노말헥산을 이용한 경우에는 상대적으로 낮은 추출효율을 보였다. 분쇄 PVC 시료에 VCM 표준용액을 주입한 분석시료에 대한 VCM 함유량 측정 결과, GC/MS를 이용한 직접주입법이나 헤드스페이스법 모두 양호한 결과를 나타내었다. PVC 제품의 중간물질인 스펀지에서의 VCM 분석과 관련하여 5 개 시험전문기관의 시험소간 비교시험 결과, 각 시험소간 결과 편차가 크지 않은 것으로 나타나 본 연구에서 제시한 전처리 및 분석방법에 대한 플라스틱 제품내의 VCM 정량방법이 유효한 것으로 판단되었다.

• Elastomers and Composites
• /
• 제54권4호
• /
• pp.294-298
• /
• 2019

A three-layered PVC sheet consisting of polyvinyl chloride (PVC) and woven polyester fabric was prepared by extrusion and calendering. The flexibility and durability of the PVC were tuned by adding plasticizers, additives, and surface coatings. The tensile and tear strengths of the three-layered PVC sheet were higher than those of commercial two-layered sheet, while exhibiting low weight. The concentrations of the total volatile organic compounds (TVOCs) and formaldehyde (HCHO) emitted from the sheet were also lowered. The PVC sheet remained stable after prolonged exposure to UV light, signifying that the PVC sheet is suitable for cargo screen applications.

• The Journal of the Acoustical Society of Korea
• /
• 제29권3E호
• /
• pp.140-145
• /
• 2010

In the present study, tubular polyvinyl chloride (PVC) cortical bone mimics that simulate the cortical shell of long bones were used to validate the axial transmission technique for assessing the cortical thickness by measuring the ultrasonic velocities along the cortical shell of long bones. The ultrasonic velocities in the 9 PVC cortical bone mimics with wall thicknesses from 4.0 to 16.1 mm and inner diameters from 40 to 300 mm were measured as a function of the thickness by using a pair of custom-made transducers with a diameter of 12.7 mm and a center frequency of 200 kHz. In order to clarify the measured behavior, they were also compared with the predictions from a theory of guided waves in thin plates. This phantom study using the PVC cortical bone mimics provides useful insight into the dependencies of ultrasonic velocities on the cortical thickness in human long bones.

• 약학회지
• /
• 제33권4호
• /
• pp.211-218
• /
• 1989

Twenty-six injectable drug products, many of which are administered by i.v. infusion, were studied for loss from aqueous solutions stored in polyvinyl chloride (PVC) infusion bags for various periods of time. The PVC infusion bags were stored in the dark room at room temperature for up to one month. Drugs stored in glass bottle served as controls. The solutions were assayed Spectrophotometrically at regular intervals. The effect of drug concentration and pH on the loss of drug from solution were studied. Octanol-water partition coefficients were used as a guage of lipid solubility of drugs. The elution of di(2-ethylhexyl)phthalate(DEHT) from PVC infusion bags was studied. For most of the drug studied, minimal loss from the aqueous solutions were observed over periods of storage time. Six of the drug products - Thiopental sodium, Hydralazine HCl, Thioridazine HCl, Trifluoperazine 2HCl, Metronidazole, Chlorpromazine HCl - were found to be lost a substantial extent. DEHP was found to be migrating from PVC infusion bags.

• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.358-364
• /
• 2018

An isotropic pitch precursor for fabricating carbon fibres was prepared by co-carbonization of ethylene bottom oil(EBO) and polyvinyl chloride (PVC). Various pre-treatments of EBO and PVC, and a high heating rate of $3^{\circ}C/min$ with no holding time, were evaluated for their effects on the oxidative stabilization process and the mechanical stability of the resulting fibres. Our stabilization process enhanced the volatilization, oxidative reaction and decomposition properties of the precursor pitch, while the addition of PVC both decreased the onset time and accelerated the oxidative reaction. Aliphatic carbon groups played a critical role in stabilization. Microstructural characterization indicated that these were first oxidised to carbon-oxygen single bonds and then converted to carbon-oxygen double bonds. Due to the higher heating rate and lack of a holding step during processing,the resulting thermoplastic fibers did not completely convert to thermoset materials, allowing partially melted, adjacent fibres to fuse. Fiber surfaces were smooth and homogeneous. Of the various methods evaluated herein, carbon fibers derived from pressure-treated EBO and PVC exhibited the highest tensile strength. This work shows that enhancing the naphthenic component of a pitch precursor through the co-carbonization of pre-treated EBO with PVC improves the oxidative properties of the resulting carbon fibers.

• 수도
• /
• 통권60호
• /
• pp.36-42
• /
• 1993

• Advances in nano research
• /
• 제15권3호
• /
• pp.253-261
• /
• 2023

This study investigates the application of nano-composite materials in physical education, specifically focusing on improving the performance of sports hall flooring. The research centers on carbon nanotube reinforced polyvinyl chloride (PVC) composites, which offer enhanced mechanical properties and durability. The incorporation of carbon nanotubes as reinforcements in the PVC matrix provides notable benefits, including increased strength, improved thermal stability, electrical conductivity, and resistance to fatigue. The key parameters examined in this study are the weight percentage of carbon nanotubes and the temperature during the fabrication process. Through careful analysis, it is found that higher weight percentages of carbon nanotubes contribute to a more uniform dispersion within the PVC matrix, resulting in improved mechanical properties. Additionally, higher fabrication temperatures aid in repairing macroscopic defects, leading to enhanced overall performance. The findings of this study indicate that the utilization of carbon nanotube reinforced PVC composites can significantly enhance the strength and durability of sports hall flooring. By employing these advanced materials, the safety and suitability of physical education environments can be greatly improved. Furthermore, the insights gained from this research can contribute to the optimization of composite material design and fabrication techniques, not only in the field of physical education but also in various industries where composite materials find applications.

• 자원리싸이클링
• /
• 제25권3호
• /
• pp.74-81
• /
• 2016

고정층 반응기에서 PVC를 염화제로 사용하여 일메나이트 광석 중 철을 선택적으로 제거하기 위한 염화반응에 대하여 조사하였다. 철의 제거율에 미치는 PVC첨가량과 반응온도의 영향에 대하여 조사하였다. 철의 제거율은 PVC 첨가량과 온도가 증가할수록 상승하였다. PVC에서 생성된 HCl가스와 반응한 후의 시편 표면에는 많은 기공이 관찰되었다. 이러한 기공에 의해서 일메나이트 입자의 중앙부분에 있는 철과 반응할 수 있었던 것으로 생각된다. 선택적 염화반응을 속도론적 모델에 의해 조사한 결과 입자 계면에서의 화학반응에 의해서 율속되는 것으로 생각된다. PVC를 사용한 일메나이트의 선택적 염화반응에서 활성화 에너지는 20.47 kJ/mol로 계산되었다.

• 한국환경과학회지
• /
• 제14권10호
• /
• pp.919-928
• /
• 2005

This study introduces the development of new supercritical water oxidation(SCW)(multiple step oxidation) to destruct recalcitrant organic substances totally and safely by using sodium nitrate as an oxidant. This method has solved the problems of conventional SCW, such as precipitation of salt due to lowered permittivity, pressure increase following rapid rise of reaction temperature, and corrosion of reactor due to the generation of strong acid. Destruction condition and rate in the supercritical water were examined using Polyvinyl Chloride(PVC) and ion exchange resins as organic substances. The experiment was carried out at $450^{\circ}C$ for 30min, which is relatively lower than the temperature for supercritical water oxidation $(600-650^{\circ}C)$. The decomposition rates of various incombustible organic substances were very high [PVC$(87.5\%)$, Anion exchange resin$(98.6\%)$, Cationexchange resin$(98.0\%)$]. It was observed that hetero atoms existed in organic compounds and chlorine was neutralized by sodium (salt formation). However, relatively large amount of sodium nitrate (4 equivalent) was required to raise the decomposition ratio. For complete oxidation of PCB was intended, the amount of oxidizer was an important parameter.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.161-161
• /
• 2016

연질 폴리염화비닐 졸 (PVC Sol) 코팅의 물리적, 화학적 내구성을 향상시키기 위하여 표면 개질된 무기물 입자를 첨가시킨 PVC 코팅을 형성하였고 그 특성을 분석하였다. 이를 통해 다양한 분야에 적용할 수 있는 고내구성 PVC sol 코팅공정을 확립하였다.