• Journal of Radiation Industry
• /
• v.10 no.1
• /
• pp.21-27
• /
• 2016

Periodontitis is disease of damaged gum tissue that is not removed the plaque onto teeth. In case that the symptoms of disease get pain worse, it will have to extract tooth because of tumefy or bleeding at gums so treatment of drug was required to periodontitis. In this study, the hydrogel was prepared by including superior viscous, excellent elastic, and biocompatibility of Poly(vinyl alcohol, PVA) and antimicrobial drug of Metronidazole (MD). The 15 wt% PVA was dissolved in deionized water and then prepared PVA solution was irradiated using gamma-ray at 25 kGy ($10kGy\;hr^{-1}$). In addition, PVA hydrogel was immersed in each 0.1, 0.25 and 0.5 wt% MD solution using stirrer for 24 hr. The result of the gelation, 0.5 wt% MD loaded PVA hydrogel(76%) was lower than PVA hydrogel (88.2%). The swelling ration of 0.5 wt% MD loaded PVA hydrogel (294.8%) was higher than PVA hydrogel (105.2%). The compressive strength and thermal properties of MD loaded PVA hydrogel was gradually lower. The drug release test of 0.5 wt% MD loaded PVA hydrogel (61%) was higher than 0.1 wt% MD loaded PVA hydrogel (12%). Therefore, MD loaded PVA hygrogel may be a promising tool for periodontitis medicine by gamma-ray.

• Polymer(Korea)
• /
• v.32 no.6
• /
• pp.587-592
• /
• 2008

High molecular weight poly(vinyl alcohol) (PVA) hydrogel to be expected as a candidate material for the wound-dressing was successfully prepared by electron beam (EB) irradiation. To produce PVA hydrogels with various gel fractions, degrees of swelling in water, gel strengths, and elongations, two different number-average degrees of polymerization [($P_n$)s] of PVA were adapted such as 1700 and 4000, and the PVA solution concentration and irradiation dose of EB were controlled to range of 5 $\sim$ 20% and 30 $\sim$ 100 kGy, respectively. The gel fraction and strength of PV A hydrogel were increased with increasing molecular weight of PVA, solution concentration, and irradiation dose of EB. On the contrary, the degree of swelling and elongation of PVA hydrogel were decreased. The thermal property and crystallinity related to degree of crosslinking of PVA hydrogel were examined by the analyses of differential scanning calorimetry and X-ray diffraction.

• Archives of Pharmacal Research
• /
• v.16 no.1
• /
• pp.43-49
• /
• 1993

The polyvinyl alcohol (PVA) hydrogel containing 1-methy-2-pymolidinone (MP) and sorbitol was preapred by the freeze and thaw method. The release rate of indomethacin from PVA hydrogel was used as a criterion for deciding the optimum formula of hydrogel using the computer optimization technique. The hydrogel of optimum formula was composed of PVA (10 w/v%), MP (0 w/v%) and sorbitol (40 w/v%) and the release rate of indomethacin was 1.981$\mu$g/ml$\cdot{min}^{1/2}$.

• YAKHAK HOEJI
• /
• v.48 no.1
• /
• pp.55-59
• /
• 2004

A PVA-soft hydrogel, which is a semi-solid form in container, whereas after applying on the skin, it formed a thin layer within a few minutes. In this study, we prepared a novel type PVA-soft hydrogel containing 6-methyluracil as active drug, and the therapeutic value was characterized. To evaluate the therapeutic value of the PVA-soft hydrogel containing drug, various animal models, thermal burn model, incision & excision wound rat model were used. We also measured the wound size and breaking strength to calculate the wound healing extent after single or multiple administration. The wound size of soft hydrogel treated group decreased rapidly than that of control group after multiple dosing in excision wound model. And, the breaking strength of the soft hydrogel treated group was greater than that of control group in incision wound model.

• YAKHAK HOEJI
• /
• v.43 no.2
• /
• pp.150-159
• /
• 1999

Hollow type suppositories inserted polyvinyl alcohol (PVA) hydrogel capsule containing propranolol·HCI (PPH) were prepared using different bases, polyethylene glycol (PEG), Witepsol H-15 (WH-15) and Witepsol W-35 (WW-35) to improve the controlled release of PPH. The release of PPH from the hollow type suppository inserted PVA hydrogel capsule was retarded than that from PEG, WH-15, or WW-35 hollow type suppositories in rat rectal cavity. When the suppositories were administered to rats, the controlled release of PPH was proved by the plasma concentration-time-profiles of PPH. No significant difference (p〈0.05) among the three different hollow type suppositories was observed in terms of AUC and MRT of PPH. WH-15 hollow type suppository inserted 12% of PVA hydrogel capsule caused irritation to rat rectal mucosa. However, the WH-15 hollow type suppository inserted PVA hydrogel capsule caused no severe irritation on rectal mucosa. The application of the hollow type suppositories using PVA in sustained rectal delivery of drugs might be feasible.

• Elastomers and Composites
• /
• v.44 no.3
• /
• pp.323-328
• /
• 2009

The rheological properties of complex materials such as polymer melts show complicated non-Newtonian flow phenomena when they are subjected to shear flow. These flow properties are controlled by the characteristics of flow units and the interactions among the flow segments. The non-Newtonian flow curves of poly(vinyl alcohol) hydrogel were obtained in various concentrations and temperatures by using a cone-plate rheometer. By applying non-Newtonian flow equation to the flow curves for PVA hydrogel samples, the rheological parameters were obtained. The PVA hydrogel samples are shear thinning under increasing shear rate modes which result in thixotropic behavior.

• Korean Membrane Journal
• /
• v.6 no.1
• /
• pp.24-29
• /
• 2004

Poly(vinyl alcohol)(PVA) and hyaluronic acid(HA) hydrogel membranes were prepared with varying HA contents from 10 to 50 wt% of PVA. The water contents of the resulting PVA-HA hydrogel membranes in various pH conditions were measured. And the permeation coefficient of indomethacin was determined using several PVA-HA hydrogel membranes at various pH conditions and also 37$^{\circ}C$.

• Journal of Environmental Health Sciences
• /
• v.47 no.1
• /
• pp.55-63
• /
• 2021

Objectives: Cefotaxime is an antibiotic used to treat several bacterial infections. Specifically, it is used to treat pelvic inflammatory disease, meningitis, pneumonia, urinary tract infections, and sepsis. It is given by injection into either a vein or muscle. Antibacterial polymers prepared by chemical bonding and simple blending of antibacterials into polymers has attracted much interest because of their long-lasting antibacterial activity. This study attempted to review the possibility of hydrogel films as functional antibacterial materials by antimicrobial activity. Methods: In this study, CTX-PAA was synthesized by the chemical reaction of polyacrylic acid with cefotaxime by N,N'-Dicyclohexylcarbodiimide (DCC) method. Synthetic antibacterial hydrogel films were then prepared with PVA and CTX-PAA for functional application. Results: The increase in the cefotaxime content of the hydrogel films showed a similar decrease in tensile strength and elongation. The values of films impregnated with chemically bonded cefotaxime showed no significant difference. Antibacterial susceptibility was determined against Streptococcus pneumoniae and Escherichia coli using a standardized disc test. Conclusion: The synthetic antibacterial hydrogel films exhibited broad susceptibility against Streptococcus pneumoniae and Escherichia coli. Notably, the antibacterial effect of antibacterial hydrogel films against Grampositive (Streptococcus pneumoniae) was superior to that against Gram-negative (Escherichia coli).

• Journal of Pharmaceutical Investigation
• /
• v.39 no.2
• /
• pp.93-95
• /
• 2009

To compare the water vapor transmission rate (WVTR) of PVA/Dextran blended hydrogel obtained by European Pharmacopiea (EP) and Japanese Industrial Standards 1099 (JIS) method, the hydrogels with various PVA/Dextran rates were prepared and their WVTR values were then checked. As dextran in the hydrogel was increased, the WVTR of hydrogel was increased. The WVTR of hydrogels were 660-1500 and $730-1900\;g/m^2$-day in EP and JIS method, respectively. There were no significant differences between the WVTRs of the hydrogels obtained by EP and those obtained by JIS method. Thus, JIS method was recommended as a WVTR method of hydrogel due to relatively simpler and shorter time.

• Journal of Life Science
• /
• v.24 no.4
• /
• pp.437-446
• /
• 2014

Problems appear when triptans are taken orally. For example, the bioavailability of triptan is reduced by the digestive system, and the drug level in the blood reduces rapidly over time; there is also a possibility of gastrointestinal disorder. To improve side effects, a transdermal patch has been prepared in hydrogel form. The polymer matrix that makes up the hydrogel uses PVA; PEG is used as an additive to induce inter/intra hydrogen bonding of the PVA and almotriptan drug is added. In addition, to accelerate micro-phase separation between PVA chains, liquid nitrogen is used. In FT-IR analysis, the absorption bands of PVA, PEG, and almotriptan were found. The degree of crystallinity, the water uptake ability and tensile strength were increased with increasing PEG content. In drug release tests, the amount of drug released increased depending on the PEG content. In this study, hydrogels with 10 wt% PEG showed better performance in drug release. Approximately 60% of the total drug amount was released in 2 hr, and the drug continued to release for 1 day. Thus, the prepared hydrogel patch is suitable as a transdermal formulation for the second dose administration of triptans to patients who require recurrent migraine treatment within 24 hr after the first administration.