• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.57-58
• /
• 2023

This study was proceeded to analyze thixotropy of cement paste according to the addition timing of PVA and borax as a basic study of thixotropy of concrete. According to experiment results, the case added borax first and PVA later is that cement paste shows low thixotorpy, and the case added PVA first and borax later is that cement paste shows thixotropy but in certain mix condition fluidity of decrease due to a chemical bond between PVA and borax. The case add PVA and borax simultaneously is that cement paste was expressed thixotropy in all mix condition. Therefore the case add PVA and borax simultaneously is suitable for expressing thixotropy of cement paste.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.3
• /
• pp.213-221
• /
• 2020

The aim of the research is to provide thixotropy on cement-based materials. For this purpose, the linkage between polyvinyl alcohol (PVA) and borax was used. Namely, adding the suspensions of PVA and borax in cement paste, the thixotropy of cement paste was confirmed. The thixotropy of cement-based materials can have various advantages on construction process, especially, the placing method using pipe can have advantages. As a result of this research, the linkage between PVA and borax is valid inside of cement paste. Therefore, using PVA and borax, it is confirmed that the cement-based materials can have thixotropy with this method, and it can be expected to contribute on developing new method of placing cement-based materials with thixotropy.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.113-114
• /
• 2022

The aim of the research is to evaluate the segregation resistivity of the mixture conditions by changing the PVA and borax solutions for thixotropic property on concrete mixture. Since the water addition caused by producing solutions of PVA and borax induces segregation of the concrete mixture, the unit water was reduced by replacing the water amount for PVA and borax solution. By replacing the water from PVA and borax solutions, the segregation was prevented with prefixed concrete mix design and thixotropic properties were also occurred.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.3
• /
• pp.37-42
• /
• 2010

The properties of paper are very susceptible to moisture content originated from relative humidity. This propensity of PVA impregnated paper was investigated in this study. Especially the hardening effect of borax treatment after PVA impregnation on the response of paper sample to the relative humidity was evaluated. When the moisture content was increased with the relative humidity, tensile stretch and tear resistance were increased while tensile strength and stiffness were decreased. A great increase in folding endurance of PVA impregnated paper sample was found at the higher relative humidity. The borax treatment could reduce the response of PVA impregated paper to the relative humidity.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.4
• /
• pp.337-348
• /
• 2023

The central objective of this study is to curtail the leakage of mortar or cement paste, often resultant of ill-constructed formwork, by implementing thixotropy in the formulation of high-fluidity, standard-strength concrete. When such concrete is utilized in smaller scale construction projects, instances of formwork gaps due to suboptimal construction precision may lead to significant leakage of mortar and paste, a problem not typically encountered with traditional slump-flow concrete. In this investigation, Polyvinyl Alcohol(PVA) and borax are incorporated into the concrete mixture to induce thixotropy. The experimental design includes varying methodologies for integrating PVA and borax, while assessing alterations in diverse concrete performances, including thixotropy and leakage reduction potential that simulates formwork gap conditions. Under the experimental conditions defined within this study, it was found that replacing, rather than merely adding PVA and borax, aids in averting water addition via suspensions. This approach yielded promising results in terms of concrete properties and proved efficacious in stemming leakage in concrete possessing sufficient thixotropy. Notably, when a 6% PVA suspension was substituted, a significant reduction in leakage was observed. Consequently, it is projected that construction quality can be ensured, even with lower precision formwork, by applying thixotropy to concrete through the use of PVA and borax.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.2
• /
• pp.125-136
• /
• 2022

This research is to reduce the formwork leakage of high-fluidity concrete caused by insufficient accuracy of formwork fabrication widely used for high-fluidity concrete to general strength concrete. However, in the actual construction site, because of the insufficient accuracy of formwork fabrication may cause leaking concrete of mortar through a gab of the formwork. Therefore, in this research, which builds on previous research into providing thixotropy with PVA and Borax, the use of thixotropy to reduce high-fluidity mortar leakage was evaluated. The results of the experiment proved that the use of thixotropy with PVA and Borax can contribute to reduction of the formwork leakage of high-fluidity mortar. This finding is expected to lead to further research on reducing leakage of high-fluidity concrete.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.110-111
• /
• 2019

Concrete with high thixotropy has a lower plastic viscosity when pour in, thus demonstrating fluidity, and After poured, the viscosity can be restored again to ensure stable progress without additional liquidity and material separation. Therefore, in this study, a basic study of thixotropy of concrete was proceeded through cross-linked bond of PVA and Borax. Therefore, it is judgment that the higher the concentration of boron solutions, the higher the strength of the interconnections between PVA and boron.

• Korea-Australia Rheology Journal
• /
• v.15 no.2
• /
• pp.97-105
• /
• 2003

In the previous paper (Hyun et al.,2002), we have investigated the shape of storage modulus (G') and loss modulus (G") of complex fluids under large amplitude oscillatory shear (LAOS) flow. As the strain amplitude increases, owever, the stress curve becomes distorted and some important information may be smothered during data processing. Thus we need to investigate the stress data more precisely and systematically. In this work, we have obtained the stress data using high performance ADC (analog digital converting) card, and investigated the nonlinear response of complex fluids, 4wt% xanthan gum (XG), 2 wt% PVA/ 1 wt% Borax, and 1 wt% hyaluronic acid (HA) solutions, using Fourier transformation (FT) rheology. Comparing the strain signals in time domain with FT parameters in frequency domain, we could illustrate the sensitivity and importance of FT rheology. Diverse and unique stress patterns were observed depending on the material system as well as flow environment. It was found that they are not the outcome of experimental deficiency like wall slip but characteristics of the material system. When nonlinear response of complex fluids is analyzed, the intensity and phase angle of higher harmonic contributions should be considered together, and the shape of the stress signal was found to be strongly dependent upon phase angle.ngle.