• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.11
• /
• pp.2192-2199
• /
• 2009

This paper proposes a novel tracking algorithm for efficiency improvement of photovoltaic(PV) system using sensor method. PV system of sensor method is exactly impossible to track a sun position when insolation is low or rapidly changed by the clouds and fogs. Also, in this case, tracking device is occurred energy consumption by unnecessary operating. This statement of reason, real power of PV system is not increased than fixed PV system in specified location. Therefore, this paper proposes a novel tracking algorithm considered insolation for efficiency improvement of PV system using sensor method. And this paper analyzes the generation volume and proves the validity of proposed algorithm as compared with the conventional PV tracking system using sensor method.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1102_1103
• /
• 2009

본 논문은 에너지 고갈로 인해 신재생에너지가 대두되는 가운데 독립형 태양광 발전시스템의 PV_Array 선정에 대한 논문이다. 독립형 태양광 발전 시스템만을 이용한 PV_Array 출력을 조정해서 부하에 안정적으로 공급하게 설계하였다. 본 논문에서는 PV_Array 내부 모듈의 개수와 인버터 변환 효율을 조정하였다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2019.06a
• /
• pp.259-261
• /
• 2019

본 논문에서는 RGB-IR 이미징 센서가 탑재된 드론을 사용하여 태양광 발전소의 태양광(PV) 패널을 탐지하는 방법을 제안한다. 태양광 발전소에서 드론에 설치된 IR 영상의 활용은 PV 패널의 결함 여부를 판단하는데 큰 도움이 된다. 그러나 IR 영상만을 사용해서 태양광 패널을 탐지하고 결함 여부를 판단하는 것은 태양광에 의해 생긴 정반사로 인해 정확도가 떨어진다. 본 논문에서 제안하는 시스템은 드론을 이용해서 IR 영상과 RGB 영상을 동시에 획득하고 활용하는 시스템을 제안한다. 제안된 시스템으로부터 IR 영상과 RGB 영상으로 패널 탐지의 정확도를 향상시키고, 태양광에 의한 정반사와 같이 오검출 될 수 있는 문제를 극복할 수 있다.

• Journal of the Korean Solar Energy Society
• /
• v.28 no.3
• /
• pp.60-66
• /
• 2008

This study is to investigate an optimal size and position of PV system for apartment complex through the electrical load matching analysis. The 4 types of arrangements of apartment buildings are considered as follows; ㅡtype, alternative ㅡtype, ㄱtype and ㅁtype. We assume that the studied site is composed of 9 buildings. Firstly, solar access evaluation of roof and facade in apartment buildings was performed with the hourly simulations of total received insolation on each surface considering the shading effect of buildings. Electrical load profile of typical Korean apartments were investigated for the load matching analysis. To calculate an annual total PV output, we used MERIT program which is a hourly based load matching tool developed by ESRD. TRY weather data of Daejeon are applied for this analysis. Result shows that approximately 11% of total electric load of the site can be supplied by the PV system in the case of full installation of PV system at the whole south-face roof area of 9 buildings in this stuided apartment complex. Depending on a various installation option of roof and facade area, the possible ratio of PV supply in total electrical load varies from 9% to 42%. Among the 4 arrangement types, the ㅡtype revealed the best option for the maximum output of PV system.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.23 no.2
• /
• pp.77-85
• /
• 2018

Renewable energy has been increasingly used and widely acclaimed as one of the solutions to rampant environmental problems. Among numerous kinds of renewable sources, the penetration rate of the PV system is relatively higher than that of others due to ease of installation. However, one disadvantage of the PV system is its dependence on weather condition. The PV system is especially critical when it is used for standalone systems because it cannot operate when the power generated from a PV module is not enough. Therefore, PV systems are often used with an energy storage system, such as batteries, to store backup energy when the weather condition is insufficient to supply power to the system. Blackout time can be reduced by increasing the size of the energy storage system, but it is a trade-off with system cost. In this work, optimal sizing of a standalone PV system is proposed to supply power to the system without blackout. The sizing of PV modules and batteries is performed by a simulation based on actual irradiation data collected during the past five years. The Life cycle costing of each system is evaluated to determine an optimal set of PV modules and batteries among several different combinations. The standalone PV system designed by the proposed method can supply power to the system with no interruption as long as the weather condition is similar to those of the past five years.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.63 no.3
• /
• pp.163-168
• /
• 2014

In this paper, when photovoltaic systems are connected to distribution system, most effective capacity and location of PV system are studied considering customer interruption costs of power distribution system. The reliability model of PV system considering the duration of sunshine, the model of time-varying load and Roy Billinton test system (bus2 model) are used. To simulate the effects of PV system, various cases are selected; (1) base case which is no connection of PV system to power distribution system when faults are occurred, (2) 3MW case which is 3[MW] connection of PV system (3) 4[MW] case, and (4) 20[MW] case which is 20[MW] connection of PV system to the bus of power distribution system. The capacity limit of connected PV system is settled to 14[MW] for all cases except case 4. The reliability and customer interruption costs for residential, general, industrial, and educational customer is evaluated.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.3
• /
• pp.260-265
• /
• 2003

The energy of PV system is different as the elevation and aximuth of the sun. This paper deals with the economical position tracking system development for the stand alone PV system. We have made more economical solar position tracking system which is used a tracking program than other similar systems. It is applied to the solar lighting lamp. We have made a comparative study of the energy amount between the fixed type and the tracking type during some period. The improved efficiency of the system is about 86 %.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.5
• /
• pp.415-422
• /
• 2009

This paper describes the UIPV(Utility Interactived Photovoltaic) system which can improve the peak-cut effect by adding energy storage device of batteries to the power converter. The proposed system has three possible operation modes depending on relative condition of PV output, which can have the power shaping function covering the peak power for 3 hours. A new power circuit and application algorithm has been applied to UIPV system which is based on working PV system during 3-hour peak time. The energy relationship by the proposed system is analyzed theoretically and experimentally. Also the proposed system is evaluated at the viewpoint of cost and total spacing, which enables the proposed UIPV system to have the reduction of the peak power demand and hence to improve.

• Journal of Korean Association for Spatial Structures
• /
• v.9 no.1
• /
• pp.6-9
• /
• 2009

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.235-235
• /
• 2007