• Structural Engineering and Mechanics
• /
• v.16 no.3
• /
• pp.241-257
• /
• 2003

The first seismically isolated structure in Taiwan was completed in early 1999. Seven new bridges of the Second National Freeway located at Bai-Ho area, a region which is considered to be of high seismic risk, have been designed and constructed with lead-rubber seismic isolation bearings. Since this is the first application of seismic isolation method to the practical construction in Taiwan, field tests were conducted for one of the seven bridges to evaluate the assumptions and uncertainties in the design and construction. The test program is composed of ambient vibration tests, forced vibration tests, and free vibration tests. For the free vibration tests, a special test setup composed of four 1000 kN hydraulic jacks and a quick-release mechanism was designed to perform the function of push-and-quick release. Valuable results have been obtained based on the correlation between measured and analytical data so that the analytical model can be calibrated. Based on the analytical correlation, it is concluded that the dynamic characteristics and free vibration behavior of the isolated bridge can be well captured when the nonlinear properties of the bearings are properly considered in the modeling.

• Broadcasting and Media Magazine
• /
• v.19 no.2
• /
• pp.36-45
• /
• 2014

With major sports events such as FIFA World Cup and The Olympic Games coming up, UHDTV technology has been given a major push by broadcasters, test and measurement (T&M), and consumer electronics (TV and set-top box) manufacturers. The increase in picture resolution ($3840{\times}2160$) for 4K and ($7680{\times}4320$) for 8K compared to current HDTV ($1920{\times}1080$), as well as the need to deliver these services in higher frame rates (50/60 up to 100/120fps) translate to a big challenge in UHDTV content delivery to households over terrestrial transmission due to higher data rates. DVB-T2 has been favored by many countries across the world as it is proven to give the best spectral efficiency for terrestrial broadcasting. On the other hand MPEG-4 appears to be the bottleneck for UHDTV since a much higher data rate is needed to deliver such services. Therefore HEVC becomes mandatory for UHDTV delivery over DVB-T2. In this paper, we will give an overview about a complete end-to-end solution for UHDTV delivery over DVB-T2 based on a realistic SFN scenario in Seoul metropolitan area.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.4
• /
• pp.340-346
• /
• 2003

Driven by the growth of the Internet and the increasing ubiquity of embedded computing systems, the embedded system is exploding in terms of it proliferation of products and the number of complex applications. Intelligent dedicated systems and appliances used in interface, monitoring, communications, and control applications increasingly demand the services of a sophisticated, state-of-the-art operating system. In the case of industrial controller, it is required to use a real-time operating system (RTOS) as a good building block to enable Internet connectivity. However, commercial RTOSes are increasingly less desirable due to their lack of standardization and their inability to keep pace with the rapid evolution of technology. In order to overcome these problems, we consider using embedded Linux and embedded web server. Availability of source code, reduced licensing, reliability, open source community support, as well as others, are key reasons for the use of embedded linux by embedded developers. In this paper, we develop embedded linux platform to control the industrial inverter with the Internet connecting feature. The method of web-based management is also proposed by using the embedded web server and Java applet. We show the feasibility of remote management for the commercial inverter controller with the proposed three-tier web-based remote management system.

• International Commerce and Information Review
• /
• v.5 no.1
• /
• pp.39-59
• /
• 2003

The purpose of this paper is to examine the possibility of whether B2B e-marketplaces continue to grow. There are numerous barriers to the growth of e-marketplace, but certain key factors can push e-marketplaces beyond these obstacles. In the stage of generating traffic, it is essential to find a vertical area to attract buyers and sellers which can generate B2B transaction through e-marketplace. Generating traffic is possible only for e-marketplaces established by those who have vertical knowledges and strong off-line relationship in the vertical areas. In the stage of concentrating traffic, more attention should be given to reach critical mass and to increase transaction through e-marketplace. Currently, there seems to be a tendency that having major buyers as members of a e-marketplace is an true factor for the successful e-marketplace. Finally, to attain the locking traffic, e-marketplace needs to have the ability to generate revenue through B2B transaction. What we have learn from this study is that having the software-technology is not a sufficient condition to successfully operate B2B e-marketplace. It is important for e-marketplace to attract major players in order to increase B2B transaction, and also to make profit by them.

• The Journal of Society for e-Business Studies
• /
• v.6 no.3
• /
• pp.81-99
• /
• 2001

The world is now meeting the era of e-commerce by development of information technology and the fast increase of use of internet. So, Korean government prepared "the colligation plan for electronic commerce activating" and WTO decides to prolong no custom on e-commerce till November 2001 when the fourth WTO Ministerial Conference holds a meeting. OECD discussed the construction of intellectual property rights of the global dimension at the Global Forum on January 2001 and reached to research the social influence of B-to-B e-commerce and to pursue the acceleration of e-commerce. UNCITRAL(United Nations Commission on International Trade Law) enacted UNCITRAL Model Law on Electronic Commerce in order to activate e-commerce, and Bolero.net serves electronic Bill of Lading to facilitate cyber trading. The purpose of this paper is to present the direction of confrontation to the these internal and external changes of business environment to Korean enterprises. Off-line enterprises should move fast to e-commerce on the condition that the existing trading at the original markets runs parallel with e-commerce. n needed, off-line enterprises should consider M&A with existing on-line firms. Also, off-line firms make use of Bolero system so that they can carry through paperless trade which means the achievement of efficiency in trading, On-line enterprises should advertise in the form of banner by combination of push and pull styles. B-to-B e-commerce firms should not depend on only the commissions, but they should create characteristic earnings by their peculiar services.

• IE interfaces
• /
• v.21 no.4
• /
• pp.418-434
• /
• 2008

This paper studied issues in decision making on the production control policy of a cathode plate manufacturing process in zinc refining plant. The present production system has a long lead time from raw materials (aluminum plate) to products (cathode plate) due to many WIP inventories. Because WIP inventories are stocked at each process and moved from one place to another frequently, they are the main cause of inefficiency in the process. In this paper, to solve this problem, several production control policies have been identified and studied. Several simulation models are used to compare the performances of these production control policies. The output lead time and WIP (Work In Process) of real production system are compared with those of simulation models. PUSH, CONWIP, DBR, KANBAN and CONWIP-DBR models have been used to simulate and review the optimized production control policy that achieves the target output quantities with decreased lead time and WIP. The simulation results of each production control policy show that CONWIP and CONWIP-DBR models are the good production control policy under the present production system. Especially in present production system, CONWIP with one parameter is easier control policy than CONWIP-DBR with two parameters. Therefore CONWIP has been selected as the best optimum production control policy. With CONWIP, lead time has been reduced by 97% (from 6,653 to 187 minute) and WIP has been reduced from 1,488 to 53, compared to the present system.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.260-263
• /
• 2003

When ICP(Inductive Coupled Plasma type etching and wafer manufacturing is being processed in semiconductor process, a noxious gas in PFC and CFC system is generated. Gas cleaning dry scrubber is to remove this noxious gas. This paper describes a power source device, 2MHz switching frequency class 2kW RF Generator, used as a main power source of the gas cleaning dry scrubber. The power stage of DC/DC converter is consist of full bridge type converter with 100kHz switching frequency Power amplifier is push pull type inverter with 2MHz switching frequency, and transmission line transformer. The adequacy of the circuit type and the reliability of generating plasma in various load conditions are verified through 50$\Omega$ dummy load and chamber experiments result.

• Current Industrial and Technological Trends in Aerospace
• /
• v.8 no.2
• /
• pp.24-30
• /
• 2010

Space solar sails are a form of spacecraft propulsion using the radiation pressure of light from a star or laser to push enormous ultra-thin mirrors to high speeds. With respect to it, U.S.A, Japan, E.U. and Russia, etc. have performed a substantial research and the space flight test. On May 2010, JAXA succeeded in launching the world's first interplanetary solar sail spacecraft "IKAROS" to Venus. Currently, solar sail propulsion is aimed chiefly at accomplishing a number of non-crewed missions in any part of the solar system and beyond. This paper presents the technology trend of advanced countries on the development of the solar sails as a new propulsion method for the space investigation and travel.

• Journal of Mechanical Science and Technology
• /
• v.14 no.8
• /
• pp.867-878
• /
• 2000

In order to study unsteady aerodynamic loads on high speed trains passing by each other 350km/h, three-dimensional flow fields around trains during the crossing event are numerically simulated using three-dimensional Euler equations. Roe's FDS with MUSCL interpolation is employed to simulate wave phenomena. An efficient moving grid system based on domain decomposition techniques is developed to analyze the unsteady flow field induced by the restricted motion of a train on a rail. Numerical simulations of the trains passing by on the double-track are carried out to study the effect of the train nose-shape, length and the existence of a tunnel on the crossing event. Unsteady aerodynamic loads-a side force and a drag force-acting on the train during the crossing are numerically predicted and analyzed. The side force mainly depends on the nose-shape, and the drag force depends on tunnel existence. Also. a push-pull (i.e.impluse force) force successively acts on each car and acts in different directions between the neighborhood cars. The maximum change of the impulsive force reaches about 3 tons. These aerodynamic force data are absolutely necessary to evaluate the stability of high speed multi-car trains. The results also indicate the effectiveness of the present numerical method for simulating the unsteady flow fields induced by bodies in relative motion.

• IE interfaces
• /
• v.15 no.4
• /
• pp.325-337
• /
• 2002

In this study we consider the problem of production planning of TFT-LCD(Thin Film Transistor - Liquid Crystal Display) production factory. Due to the complexities of the TFT-LCD production processes, it is difficult to schedule the production planning, and the study about automated scheduler is insufficient. In addition, the existing production method is a Push-System to raise the operation rate with expensive equipment, that has the problem to satisfy the due-date. This study presents an algorithm having a concept of Pull-System that satisfies the due-date and considers specialties of TFT-LCD production process. We make MPS(Master Production Schedule) according to the sales order, and present algorithms for scheduling about In/Out plan considering factory capacity, line balancing, material requirement, and inventory level of all Array, Cell, and Module processes. These algorithms are integrated as an automated production system, and we implement them in the actual TFT-LCD factory circumstance.