• 한국지반공학회지:지반
• /
• 제7권1호
• /
• pp.7-14
• /
• 1991

시편을 통과하는 초음파의 속도를 측정 함으로써 흙의 동전단 탄성계수의 측정을 시도하였다. 초음 파의 발생 및 감지장치인 PUNDIT를 사용하였으며, 4종류의 시료에 따른 공극비 7, 포화도 7종류에 대해서 총 46개의 실험을 실시하였다. 본 연구는 시료의 공극비 및 포화도,시료의 종류등이 동전단 탄성계수에 미치는 영향에 대해서 분석하였다. 분석 결과,흙의 동전단 탄성계수는 공극비가 증가함에 따라 감소하는 경향을 보였으 며, 시료의 종류에 의 해서도 영 향을 받는다는 사실을 알 수 있었다. 또한 본 실험 장비인 PUNDIT를 사용할 경우, 시편의 길이는 5cm-8cm가 적당하였으며, 포화도의 영향은 거의 없는 것으로 판단 되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제25권3호
• /
• pp.8-15
• /
• 1997

The ultrasonic velocity and dynamic MOE of acetylated bamboos were investigated using PUNDIT, a transit time measuring device for longitudinal ultrasonic propagation. Bamboo specimens were boiled in acetic anhydride for 2, 4 and 6 hours, and the maximum average WPG (Weight Percentage Gain) of 19% was obtained at 6 hours. The volumes of acetylated bamboos increase with boiling time and WPG, while as WPG increases their oven-dry densities generally increase with a concave around 5% WPG. This oven-dry density pattern likely influences the trends of ultrasonic velocity and dynamic MOE. which generally decrease with a convex around 5% WPG. It is postulated that during boiling extractives in a bamboo move and aggregate at its surfaces transiently, resulting in the increase of ultrasonic velocity and dynamic MOE. To explain the fact that ultrasonic velocity varies with WPG a simple model was proposed and some ultrasonic properties of a transmitted wave were examined.

• The Journal of Asian Finance, Economics and Business
• /
• 제5권2호
• /
• pp.63-72
• /
• 2018

Researches based on the pattern of planned behavior holds that the three variables of entrepreneurial attitudes, subjective norms, and perceived behavior control influence each other and influence entrepreneurial intentions respectively. However, there are also different, even conflicting research conclusions that continue to emerge. Researches based on the pattern of alertness, believe that profit opportunities and individuals' pursuit to truth are the driving forces. Many scholars have demonstrated the impact of individual entrepreneurial alertness on entrepreneurial intentions. However, as an exogenous causal agent, profit opportunities have a logical problem: if there are no other assumptions, the mere existence of opportunities does not adequately explain entrepreneurial alertness. To address this gap, this study considered samples from mainland China, where entrepreneurial activities are very active currently, to test the role that entrepreneurial alertness is assumed to play in the planned behavior model. The results show that the three dimensions of alertness, individually partly intermediate the influence of entrepreneurial attitude on entrepreneurial intention, the influence of subjective norms on entrepreneurial intention, and that of perceived behavior control on entrepreneurial intention. This article studied the production of entrepreneurial intention by integrating the two patterns of planned behavior and alertness through empirical analysis, and opened up a new field for subsequent research on entrepreneurial intention.

• The Journal of Asian Finance, Economics and Business
• /
• 제6권1호
• /
• pp.205-215
• /
• 2019

Researchers have confirmed the relationship between ambidexterity learning and innovation performance, but according to the resource-based theory, the relationship between ambidexterity learning and innovation performance is also affected by the internal resources of the organization. Internal resources are an important factor affecting the transformation of learning outcomes into performance. In addition, few scholars have pointed out whether different types of learning have different effects on different types of innovation performance. This study collects data from 170 High-tech enterprises in Shandong, china, and discusses the effects of exploitative learning and explorative learning on management innovation performance and technological innovation performance. This study further examines the moderating role of slack resource on the relationship between ambidexterity learning and innovation performance. Results show that ambidexterity learning has positive effect on innovation performance. Compared with exploitative learning, explorative learning has a greater impact on management innovation performance; compared with explorative learning, exploitative learning has a greater impact on technological innovation performances. Slack resource has positive moderating role between the relationship of exploitative learning, explorative learning and technology innovation performance. But Slack resource has no moderating role between the relationship of exploitative learning, explorative learning and management innovation performance.

• Journal of the Korean Wood Science and Technology
• /
• 제27권1호
• /
• pp.50-55
• /
• 1999

Since ultrasonic stress wave velocity varies with wood temperature and moisture content, ultrasonic stress wave could be a tool to predict wood moisture content if temperature effect could be eliminated. This temperature effect was investigated by measuring the velocities of ultrasonic stress waves transmitting through air, a metal bar and a dimension lumber at various temperatures. For air the velocity and amplitude of the ultrasonic stress wave increase with temperature, while for a metal bar and a dimension lumber those decrease as temperature increases. However all three materials showed velocity hystereses with a temperature cycle. The effect of temperature and moisture content on stress wave velocity of a dimension lumber was depicted in the form of a three dimensional graph. The plot of stress wave velocity vs. wood moisture content was well fitted by two regression equations: a exponential equation below 46% and a linear equation above 46%.

• Journal of Electrical Engineering and Technology
• /
• 제2권3호
• /
• pp.300-305
• /
• 2007

This paper reports an investigation of overvoltages caused by ferroresonance in the distribution system, which consists of a bank of open-delta single-phase voltage transformers. The high voltage sides of the voltage transformer are connected to the distribution system via three single-phase fuse cutouts. Due to the saturation characteristic of the transformer cores, ferroresonance can occur in the condition that the transformer is energized or deenergized with single-phase switching operation of the fuse cutouts. The simulation tool based on EMTP is used to investigate the overvoltages at the high side of voltage transformer. Bifurcation diagrams are used to present the ferroresonance behavior in ranges of different operating conditions. The simulation results are in good agreement with the results from the experiment of 22 kV voltage transformers. The mitigation technique with additional damping resistors in the secondary windings of the voltage transformers will be introduced. Brief discussion will be made on the physical phenomena related to the overvoltage and the damage of voltage transformer.

• Journal of the Korean Wood Science and Technology
• /
• 제39권2호
• /
• pp.117-124
• /
• 2011

The possibility of using the properties of an ultrasonic wave as a means for monitoring the moisture content of a board during drying was investigated. The ultrasonic wave signals are influenced by moisture content and other factors such as temperature, moisture gradient and coupling area. The effect of temperature was examined by measuring the transit times, amplitudes and velocities of ultrasonic waves transmitted through air, a metal bar and a board at various temperatures. The effect of a moisture gradient was studied using a model specimen composing five wood pieces of various moisture contents. The velocity and amplitude of the ultrasonic waves transmitted through air increase with temperature, while those through a metal bar and a board decrease. It was confirmed that the temperature effect is partially attributed to the change of transducer's properties. The effect of a moisture gradient on the velocity of an ultrasonic wave varies with the average moisture content of a board. As the dimension of the end face of a board increases the velocity of an ultrasonic wave increases and low frequency components more dominates than high frequency components. The transit times of ultrasonic waves transmitted through a board during kiln drying reflect the temperature steps in the drying schedule and the transducer temperatures.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권9호
• /
• pp.1-9
• /
• 2021

This study aimed to investigate the existence of the Feldstein-Horioka (1980) puzzle in international macroeconomics by applying the conditional Autoregressive Distributed Lag (ARDL) model to examine the long-run relationship between national savings and investments in Thailand and China. The input of this study relied on annual national savings and investments as a fraction of GDP during 1980-2019 which was collected from China National Bureau of Statistics (NBS) and Thailand National Economic and Social Development Council (NESDC). Hypothetically, Augmented Dickey-Fuller (ADF) and Phillips-Perron (PP) unit root tests were applied to test the stationary properties and to investigate the integration level of selected time series. The empirical results, confirmed by cumulative sum (CUSUM) and cumulative sum square (CUSUMSQ), maintained no serial correlation and structural break problems. The finding of this study suggested that the Feldstein-Horioka puzzle in Thailand did not exist significantly. Thailand's national savings and investments nexus was independent, following the classic economic idea that financial liberalization, or perfect capital mobility, allowed national savings and investments to flow freely to countries with better interest rates. Whereas, a strong significant correlation was found in the case of China during the fixed exchange rate regime switching in 1994 and post WTO participation after 2001-2019.

• Journal of the Korean Wood Science and Technology
• /
• 제36권1호
• /
• pp.61-68
• /
• 2008

초음파 시험기를 이용하여 목재의 파단형상이 초음파의 속도에 미치는 영향과 송수신단자의 위치 변화를 통한 효율적인 결점부위 탐색방법을 검토하였다. 파단의 방향에 따른 초음파 속도는 송수신 단자와 평행방향의 파단에서는 영향을 미치지 않고 수직방향 파단에서만 영향을 주었다. 이는 초음파의 진행 경로에 결점부위가 위치하지 않을시 결점을 파악하지 못하는 단점을 보였다. 또한, 초음파의 진행방향과 수직으로 파단이 되었더라도 초음파가 진행되는 직선상에 파단부위가 존재하는 경우에만 파단여부를 확인할 수 있었다. 결점부위 판별 방법은 송수신 단자를 시편 양끝부분에 서로 엇갈리게(한쪽은 상단부에 반대편은 하단부에 위치) 위치시켰을 때 파단 존재여부가 확인되었다. 일정구간의 파단을 확인한 후 두 송수신 단자를 폭 방향으로 마주보게 위치시켜 구간별로 이동시키며 탐색하면 결점부위가 정밀하게 판별되었다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2008년도 공동학술대회
• /
• pp.201-206
• /
• 2008

석조문화재의 풍화도의 산정은 문화재의 진단 및 보존에 매우 중요한 부분으로 많은 경우 풍화암의 속도와 신선암의 속도의 차이를 이용한 경험식에 의존하고 있다. 본연구에서는 국내의 석조문화재를 구성하고 있는 대표적 지역인 익산, 거창, 원주, 괴산, 충주에서 획득한 신선한 화강암을 대상으로 실험실 및 현장측정 장비를 이용해 속도를 측정, 비교하고 이것이 풍화지수산정에 미치는 영향을 알아보고자 한다. PUNDIT을 사용하는 현장측정의 경우 휴대가 간편하나 측정속도의 불확실성이 높을 가능성이 있기 때문에 실험실에서 암삼축 시험기를 이용한 측정과 비교하였다. 이 두 자료를 비교하여 현장측정의 상대적 정확도를 비교, 분석할 수 있었고 이 차이는 암석의 풍화도 산정에는 크게 영향을 미치지 않는 것으로 나타났다. 하지만 일반적으로 풍화도 산정에 쓰이고 있는 신선암의 속도는 5000m/s를 사용하고 있으나, 5개의 지역에서 선정된 신선한 화강암의 속도는 3200에서 4400m/s까지 다양하게 나타났다. 따라서 이러한 차이를 무시하고 풍화도를 산정하는 경우 실제 신선암의 속도를 사용하는 경우에 비하여 그 풍화도가 많게는 2단계 이상 높게 평가되었으며 이는 문화재의 진단 및 보존에 매우 큰 영향을 미칠 것으로 생각된다.