• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.222-223
• /
• 2010

TOP245P driver IC modeling technique are proposed for the LED Driver design. Analog behavioral model of TOP245P IC including the shunt regulator, under-voltage(UV) detection, over-voltage(OV) shut-down and SR flip-flop is developed by using PSPICE. The averaged-model and switching-model is applied to the LED driver simulation. The simulation results by the proposed TOP245P IC modeling technique are in good agreement with that in the data sheet and an experiment data.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.264-266
• /
• 2006

This paper presents a impedance model for the simulation of both static and dynamic characteristics of the electrodeless fulorescent lamp. A behavioral, PSpice compatible, model has been developed for the electrodeless fluorescent lamp. The model was tested at steady-state for different power levels, with an LCC modulated drive. and this model is established from some equations and measured electrical characteristics of EEFL. The validity of proposed lamp model is verified from the simulation and experimental results.

• Journal of Electrical Engineering and Technology
• /
• 제3권1호
• /
• pp.36-42
• /
• 2008

In a gas insulated substation (GIS), Very Fast Transient Over-voltages (VFTOs) are generated due to switching operations and ground faults. These fast transients are associated with high frequency components of the order of a few hundreds of MHz. These transients may cause internal faults i.e., layer-to-layer faults or minor faults in a capacitively graded bushing, which is one of the important pieces of terminal equipment for GIS. In the present study, the PSPICE model has been developed to calculate the voltage distribution across the layers of 420kV graded bushing for high frequency pulses of rise time 1 to 50ns, which simulate the VFTO. For this simulation, an equivalent electrical network of bushing with different equivalent layers has been considered. The effect of different equivalent layers modeling circuits on the non-uniform voltage factor has been analysed. The influence of copper strip inductance on voltage distribution across layers has also been analysed for various rise times of high frequency transients. Finally, the leakage current of the bushing is calculated for evaluating the bushing condition under these transients.

• 조명전기설비학회논문지
• /
• 제21권5호
• /
• pp.60-67
• /
• 2007

본 논문에서는 전력계통에서 발생되는 surge나 고장전류에 의해서 변압기의 고압측 권선에 선간단락이 발생할 경우 유도되는 전자력의 크기를 유한요소 전자계해석 프로그램을 이용하여 해석하는 방법을 제안하였다. 연구에서 사용된 배전용 변압기 model은 1[MVA], 22,900/220[V] 단상 외철형 Cable 권선형 변압기로서 권선간 단락을 모의하는 방법을 제안하고, FEM 프로그램(FLUX2D)을 이용하여 단락전류와 각방향의 전자력을 계산하고 분석하였다. 누설자속분포, 권선단락 시 전압 및 전류파형, 권선간에 작용하는 힘의 변화와 분포를 계산하였다. Simulation 방법의 타당성을 검증하기 위하여 이론치와 Pspice 프로그램을 이용하여 계산한 결과와 5[%] 이내의 오차율로 아주 잘 일치함을 확인하였다. 선간단락전류는 정격전류의 약 400배이며, 전자력도 $20{\sim}200$배 정도로 급증하였다. 본 연구의 결과는 배전용 변압기의 신뢰도 향상을 위하여 변압기 코일과 절연구조 설계에 유용한 정보를 제공하게 될 것이다.

• Journal of Power Electronics
• /
• 제11권3호
• /
• pp.381-388
• /
• 2011

This article presents the development of a model for SiC power diodes based on the physics of the semiconductor. The model is able to simulate the behavior of the dynamics of the charges in the N- region based on the stored charge inside the SiC power diode, depending on the working regime of the device (turn-on, on-state, and turn-off). The optimal individual calculation of the ambipolar diffusion length for every phase of commutation allows for solving the ambipolar diffusion equation (ADE) using a very simple approach. By means of this methodology development a set of differential equations that models the main physical phenomena associated with the semiconductor power device are obtained. The model is developed in Pspice with acceptable simulation times and without convergence problems during its implementation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.62-64
• /
• 1999

전자식안정기 설계에 있어서 중요한 램프의 모델링의 연구이며 이 모델은 기존의 방식에서 요구되는 많은 측정값에 의한 방식과는 달리 2개의 파라메터에 의해 결정되는 장점이 있다. 또한 DSPICE로 구현이 용이하므로 시뮬레이션을 통해서 안정기 회로의 L, C값의 초기값을 선택하는데 유용한 방법이 될 수 있다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제5권1호
• /
• pp.6-8
• /
• 2013

In this paper, we present an intelligent digital controller circuit which can be applied to automatic voltage regulation. The proposed solid state transformer with Pspice simulation model shows that our approach is very efficient and produces the desirable output. It is comparable to an ordinary magnetic coupled autotransformer.

• 산업기술연구
• /
• 제28권B호
• /
• pp.117-122
• /
• 2008

This paper presents the conductance model at high frequency of the Ceramic Metal Halide Lamp and the designing method of the electronic ballast with the LCC resonant tank type by using that model. Conductance model is based on a physical phenomenon in the discharge tube of the lamp and model constants of conductance model are obtained by Least Squares Method. After equivalent impedances are determined by the conductance model, The LCC resonance tank is designed by using the equation of the lamp power. Simulation result using PSpice software and experimental results show that the conductance model in this paper is very useful to design the electronic ballast at high frequency for the Ceramic Metal Halide Lamps.

• Journal of Power Electronics
• /
• 제18권5호
• /
• pp.1489-1500
• /
• 2018

Partial shading analysis of large-scale photovoltaic (PV) arrays has recently become a theoretically and numerically challenging issue, and it is necessary for PV system designers. The main contributions of this study are the following: 1) A PSIM-based macro-model was employed because it is remarkably fast, has high precision, and has no convergence issues. 2) Three types of equivalent macro-models were developed for the transformation of a small PV sub-array with uniform irradiance to a new macro-model. 3) On the basis of the proposed new macro-model, a tearing method was established, which can divide a large-scale PV array into several small sub-arrays to significantly improve the efficiency improvement of a simulation. 4) Three platforms, namely, PSIM, PSpice, and MATLAB, were applied to evaluate the proposed tearing method. The proposed models and methods were validated, and the value of this research was highlighted using an actual large-scale PV array with 2420 PV modules. Numerical simulation demonstrated that the tearing method can remarkably improve the simulation efficiency by approximately thousands of times, and the method obtained a precision of nearly 6.5%. It can provide a useful tool to design the optimal configuration of a PV array with a given shading pattern as much as possible.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 제4회 영호남학술대회 논문집
• /
• pp.142-145
• /
• 2002

This paper describes an influence of system voltage harmonics on arrester deterioration diagnostic techniques based on leakage current measurement because the resistive current is composed of two components caused by nonlinear characteristics of arrester and by system voltage harmonics. Resistive leakage currents of arresters, which can be evaluated by the third harmonic component of total leakage currents, increase with its deterioration progress. In this paper, we developed a PSpice model for ZnO arrester to simulate the harmonics' effect described above. In simulation, pure sinusoidal voltage and the $3^{rd}$ harmonic voltage are applied to the model, and the leakage current changes are compared. The simulation results showed that the magnitudes of resistive leakage current depend not only on the phase of system voltage harmonics but also on the magnitude of it.