• Journal of information and communication convergence engineering
• /
• 제9권1호
• /
• pp.74-77
• /
• 2011

PSPICE modeling of a commercial LED driver IC (TOP245P) and PC817A optocoupler is proposed for the switch-mode power supply (SMPS) (applicable to LED driver) design and simulation. An analog behavioral model of the TOP245P IC including the shunt regulator, under-voltage(UV) detection, over-voltage(OV) shut-down and SR flip-flop is developed by using PSPICE. The empirical equation of PC817A current transfer ratio (CTR) is fitted from the datasheet of PC817A. Two types of SMPSs are simulated with the averaged-model and switching-model. The simulation results by the proposed PSPICE models are in good agreement with those in the data sheet and an experimental data.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권2호
• /
• pp.150-158
• /
• 1999

The process of designing protective circuits against damage by transient overvoltages requires much work and expensive equipment. However computer simulation using PSpice can overcome these problems. In this paper a gas tube and a ZnO varistor Pspice-model considering the steepness of the wave-front were presented. The effects of various waveforms on the transient behaviors and firing volt-ages of a gas tube were modeled by controlled voltage source E controlled current source G and TABLE function of PSpice. And the nonlinear characteristics of a ZnO varistor were modeled by controlled voltage source E and H. To estimate the characteristics of the models proposed various waveforms specified in IEC Std. 1000310-4-5 were used in the simulation and the actual tests. The simulation results were compared with test results and showed good agreement.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1209-1211
• /
• 2000

This paper presents a PSPICE circuit model for the simulation of both static and dynamic characteristics of fluorescent lamps. The model can by utilized for an electric ballast simulation with continuous dimming and transient mode simulation such as step dimming Characteristics of a Rosen-type piezoelectric transformer were analyzed by combining an equivalent circuit with piezoelectric equations and the relation between the characteristics and the dimension of the PT was studied.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 E
• /
• pp.1675-1677
• /
• 1998

It is currently increasing to use surge protection devices in the protection of various electronic circuits from the transient overvoltages such as lightning strikes and switching surges. For this reason, the simulation methods, which can easily predict the protection performance of the devices, are strongly required in order to design the adequate surge protection circuits in lightning surge cut-off performance and economic aspects. This paper deals with ZnO varistor modeling method for designing a surge protection circuit and suggests the Pspice simulation model which takes the characteristic of varying clamping voltage into consideration during the time-to-crest, in range of $8{\sim}30{\mu}s$, of surge current applied to a ZnO varistor. The ZnO varistor Pspice simulation data introduced in this paper has produced almost same values as the measured results experimentally.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.1876-1878
• /
• 1998

For an analysis and simulation of the conducted EMI of switching converters, an accurate simulation model for MOSFET is needed. This paper presents a new modeling approach, which incorporates DC output characteristics and AC dynamics especially the parasitic capacitances. It uses Pspice ABM(Analog Behavioral Model) and the MOSFET parameters can be obtained from the Data sheet in the frequency range of interest for EMI analysis. The model verified with an experimental setup and the EMI for a test converter is analyzed with respect to the MOSFET switching waveforms.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.148-151
• /
• 1997

Pspice is not offered a library of mechanical factor like DC Motor, Induction Motor which is needed in Power Electronics field. Therefore, Induction Motor was made library by Equibalent circuit in this study. This model is applied in Voltage-Type inverter and is investigated its characteristics. IGBT is tested by two methods of Macro and Micro Modeling as semiconductor. PWM signal is used of pulse signal. Voltage and current, speed was simulated for assurance of model.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.630-633
• /
• 2001

This paper presents a PSPICE circuit model for the simulation of both static and dynamic characteristics of fluorescent lamps. The model can by utilized for an electric ballast simulation with continuous dimming and transient mode simulation such as step dimming Characteristics of a Rosen-type piezoelectric transformer were analyzed by combining an equivalent circuit with piezoelectric equations and the relation between the characteristics and the dimension of the PT was studied.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.382-384
• /
• 1995

The advancement of power semiconductor devices has given great attribution to the performance and reliability or power conversion systems. But contemporary power devices have room for improvement. So much interest and endeavor are being applied to develop an improved power devices. The MOS-Controlled Thyristor(MCT)is a recently developed power device which combines four layers thyristor structure and MOS-gate. Owing to advantages compared to other devices in many respects, the MCT attracts much notice recently. Nowadays, in designing and manufacturing power conversion systems, the importance of circuit simulation for reducing cost and time is incensed. And to excute the simulation that resemble the real system as much as possible, to develop a model of power device that provides properly static and dynamic characteristics is important. So, this paper presents a PSPICE model of the MCT considering dynamic characteristics.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1991년도 추계종합학술발표회논문집
• /
• pp.210-214
• /
• 1991

We briefly compared GaAs MESFET model and s셔요 on the method of parameter extraction for PSPICE simulation. The parameter determined from above method were substituded into a commercial version of PSPICE which supports the hyperbolic tangentent model. The result of simulation is reasonably good at the lower VGS and is significantly fitted overall by optimization.

• 전력전자학회논문지
• /
• 제8권2호
• /
• pp.180-191
• /
• 2003

본 논문에서는 압전 변압기와 CCFL 구동회로의 전기적 등가회로에 의한 PSPICE와 모델을 제시하였다. 램프모델은 최소 제곱근을 이용하여 모델의 파라미터들을 유도하였다 이 모델에 대한 확증을 위해 CCFL 구동회로의 단독모델을 가지고 시뮬레이션을 수행한 결과 정확한 모델링이 되었음을 확인하였으며, 압전변압기는 푸시풀 인버터와 부하로써 주로 PSPICE로 모델링한 CCFL을 사용하여 시뮬레이션을 수행한 결과 만족스러운 모델링이 이루어졌음을 알 수 있었다.