• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.116-123
• /
• 1997

This paper was described about principle and form of proposed circuit made use of soft switching technology ZVS(Zero Voltages Switching) and ZCS(Zero Current Switching) to reduce turn on and off loss at switching. Also, the analysis of the proposed circuit is described generally by using normalized parameter and basic operating principle and driving characteristics have been evaluated as to switching frequency and load p arameter. Based on the characteristics value, a method of circuit design is proposed. In addition, Pspice's simulation and experimental waveforms are compared with theoretical ones. The experimental results shows that the proposed Inverter can be used practically such as power source system for induction cooker etc.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.132-135
• /
• 2001

The design of square pulse generators using pulse forming lines (PFLs) made up of identical L and C, was reviewed in this study. 14 different types of PFLs were analyzed utilizing PSpice simulation results. These PFLs were characterized with respect to their distinct features: the number of forming lines (single or double), the circuit relationship between PFL and load (parallel or series), the types of energy storage (voltage source, current source or a combination of both). The characteristic impedances, output parameters such as pulse width, voltage and current magnitudes, and powers were derived for each scheme. The merits and demerits of the output parameters were also included.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.77-80
• /
• 2003

Switching Mode Power Supply(SMPS) is widely used in many industrial fields. Power factor improvement and harmonic reduction technique are very important in SMPS. In this paper, we propose the circuit applied Flying Capacitor Snubber for improving power factor of boost converter on fast switching state. Snubber circuit consists of a inductor, two diodes and a capacitor. The losses of switching are reduced by inserting a snubber inductor in the series path of the boost switch and the rectifier diode to control the di/dt rate of the rectifier during it's turn-off. Prior to actual experiment, the circuit analysis Is implemented by PSPICE simulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.508-511
• /
• 1991

In this paper, we have analyzed the transient and steady state characteristics of buck type DC-DC converter using the sliding mode control method based upon VSS. This control method provides the easier analysis tool due to the time domain analysis and the acquirement of desired transient characteristics if the slope of the switching line is properly selected, and guarantees the robustness against parameter uncertainties and load disturbances. Also, it can achieve direct nonlinear control without linearizing approximation of state space averaging method. PSPICE simulation results are then presented verifying these concepts.

• 한국통신학회논문지
• /
• 제16권2호
• /
• pp.145-154
• /
• 1991

본 논문에서는 데이터의 저장과 판독은 일반 SRAM과 같고 명령과 탐색을 수행하는 8비트 $\times16$ 워드 연상메모리(CAM: Content Addressable Memory)의 알고리즘과 하드웨어를 제시하였다. 설계된 연상메모리 칩은 5개의 기능별 블록(연상메모리 셀 어레이. 어드레스 디코더, 어드레스 인코터, 데이터 셀럭터, 감지 증폭기)으로 나누어서 설계하고 논리 및 회로 검증을 마친 후 3 um CMOS N Well공정을 이용하여 칩을 제작하였다

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.318-320
• /
• 2003

This paper presents a novel single-stage high frequency resonant DC-DC converter using zero voltage switching with high input power factor. The proposed high frequency resonant converter integrates half-bridge boost rectifier as power factor corrector (PFC) and half-bridge resonant converter into a single stage. The input stage of the half-bridge boost rectifier is working in discontinuous conduction mode(DCM) with constant duty cycle and variable switching frequency. So that a high power factor is achieved naturally. Simulation results through the Pspice have demonstrated the feasibility of the Proposed DC-DC converter. This proposed converter will be able to be practically used as a power supply in various fields as induction heating applications, DC-DC converter etc.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.516-518
• /
• 1994

A new class of zero-voltage switching (ZVS) pulse width modulated (PWM) half-bridge converter is investigated. The new converter is capable of switching zero voltage and keeping advantages of quasi-resonant half-bridge converter while maintaining constant frequency operation. The theoretical analysis of a ZVS PWM half bridge converter is presented and is verified by PSPICE simulation results.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.407-410
• /
• 2009

A piezoelectric device which converts mechanical vibration energy into electrical energy is able to harvest energy and the usable energy is mW ${\sim}$ W, hence a converter is necessary to acquire the energy efficiently. Various limited conditions should be considered for the design of AC/DC converter for energy harvesting of a piezoelectric device supplying small amount of energy. In addition to simple structure, compact size, light weight and high efficiency, the energy harvesting AC!DC converter should adopt the technique of self operating, in which only the harvested energy from the piezoelectric device is available. This paper proposes new AC/DC resonant boost converter to harvest efficiently electrical energy from mechanical vibration energy, analyzes the operating characteristics of the converter and proves its feasibility for energy harvester with PSPICE simulation and experiment.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.327-329
• /
• 2009

A first short stoke current which has a 10/350 ${\mu}s$ waveform is able to be generated by using the crowbar switch in R-L-C circuit. In this paper, a peaking circuit has been applied to make crowbar switch. Operate effective for generating 10/350 ${\mu}s$ waveform. According to simulation with PSpice, we have found that some value of inductance were more effective to trigger a crowbar switch. As a result of experimental test using crowbar switch with peaking circuit, the success rate of triggering crowbar switch is higher than the normal crowbar switch without peaking circuit.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2009년도 정기총회 및 추계학술대회 논문집
• /
• pp.69-71
• /
• 2009

본 논문은 부하전압의 크기에 따라 동작모드가 다르게 구성되는 공진형 DC/DC 컨버터의 동작 특성을 해석한다. 공진형 DC/DC 컨버터는 직류 입력전원에 연결되는 LC 공진회로, 공진회로의 캐패시터 전압이 최대일 때 부하측으로 에너지를 전달하는 공진형 컨버터로 구성되어있다. 공진형 컨버터는 공진 회로의 캐패시터 전압과 부하전압의 상대적인 크기에 따라서 2개의 동작 모드 특성을 가진다. 공진 캐패시터 전압의 최대값이 부하전압보다 작을 경우, 스위칭 회로는 부스트 인덕터를 이용하여 입력측 에너지를 부하측으로 전달한다. 반대로 큰 경우에는 스위칭 동작없이 공진 캐패시터가 부하측으로 직접 연결되어 입력측 에너지를 부하로 전달한 후, 공진 캐패시터의 잔여 에너지를 부스트 인덕터를 이용하여 부하측으로 전달한다. 공진형 DC/DC 컨버터 회로의 동작원리를 설명하고, PSPICE Simulation 및 실험을 통하여 검증하였다.