• 대한전기학회논문지:전력기술부문A
• /
• 제50권8호
• /
• pp.351-358
• /
• 2001

This paper deals with the PSS modeling of Ulchin N/P #1 as well as the generator and excitation system modeling by utilizing the recorded data from AVR step test, which has been performed by entering small voltage signal into the AVR summing point. In addition to it. two recorded results obtained from the AVR step test with PSS sunning and without PSS running have not only been compared each other on the time domain, but also they heve been analyzed with FFT analysis on the frequency domain; thus, the desirable effects of running PSS in Ulchin N/P #1 on power system have been explicitly confirmed. Finally, the derived PSS model parameters lead to good matches between simulation results and recorded data.

• 전기학회논문지
• /
• 제58권4호
• /
• pp.655-664
• /
• 2009

This paper, Part 1, describes the effective dual-input PSS parameter design procedure for the IEEE Type PSS2A against the Dangjin 612 MVA thermal plant's EX2000 excitation system. The suggested tuning technique used the model-based PSS tuning method and consisted of three steps: 1) generation system modeling; 2) determination of PSS2A model parameters using linear, time-domain transient and 3-phase simultaneous analyses, and 3) field testing and verification, which are described in Part 2. The effective PSS2A model parameters of EX2000 system in the Dangjin T/P #4 were designed according to the suggested procedure, and verified by using three analyses.

• 벤처창업연구
• /
• 제7권2호
• /
• pp.55-61
• /
• 2012

개인화된 제품이나 서비스에 대한 시장의 요구가 갈수록 커지면서, 기업들은 대량 고객화 시대에 제품(서비스)를 차별화 시키고 제품(서비스)의 가치를 증가시키기 위해 제품과 서비스를 통합해가도 있다. 이를 제품-서비스 시스템(Product-Service System: PSS)라고 한다. 기존연구에서는 PSS 모델링 방법을 중심으로 많은 연구가 진행되고 있으나, 본 연구에서는 서로의 특성이 전혀 다른 유형의 제품과 무형의 서비스를 통합하는 PSS의 설계요인을 분석하고자 한 것이다. 이를 위해, 본 연구에서는 스마트기기 사용자들을 대상으로 하여 실시된 설문조사 결과를 분석하고, 이를 설계요인 프레임워크에 의해 분석하는 실증적 탐색연구를 실시하였다. PSS에서 유형의 제품 기능은 무형의 서비스 기능을 이용하기 위한 보조적 역할을 하며, 서비스 기능이 주기능으로서 역할하는 것으로 나타났다.

• 전기학회논문지
• /
• 제63권7호
• /
• pp.883-888
• /
• 2014

The paper describes the parameter tuning of power system stabilizer (PSS) for a power plant based on hybrid system modeling. The existing tuning method based on bode plot and root locus is well applied to keep power system stable. However, due to linearization of power system and an assumption that the parameter ratio of the lead-lag compensator in PSS is fixed, the results cannot guarantee the optimal performances to damp out low-frequency oscillation. Therefore, in this paper, hybrid system modeling, which has a DAIS (differential-algebraic-impusive-switched) structure, is applied to conduct nonlinear modeling for power system and find optimal parameter set of the PSS. The performances of the proposed method are carried out by time domain simulation with a single machine connected to infinite bus (SMIB) system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.31-34
• /
• 2002

It studied modelling about employing analog PSS in domestic 500MW grade standard thermoelectric power plant in this paper. Modeling and parameters were verified by simulation of PSS response characteristics measured in AVR step examination and using power plant system model parameters decided by generator characteristics test. Through this PSS modelling research, contributed in domestic electrical power system small signal stability as that do modelling to be possible exact analysis of power system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.13-14
• /
• 2008

This paper describes the optimal PSS parameter design for the PSS of EX2000 excitation system. The suggested tuning technique uses the model-based PSS tuning method which have three steps: generation system modeling, determination of PSS parameters, and on-site test. Using this method, the PSS parameters of EX2000 system in Dangjin T/P #4 was designed and verified by linear analysis program, PSS/E, and EMTDC/PSCAD.

• 산업경영시스템학회지
• /
• 제33권2호
• /
• pp.148-153
• /
• 2010

Nowadays, customers have increasing needs, so more and more enterprises are selling their products with additional services and or contents. The emergence of service added to the product leads to the emergence of the Product-Service Systems(PSS). Many researches related to PSS are mainly concerned with general PSS and PSS modeling, which can not readily assist manufactures of consumer products to implement and realize PSS solution. We have wondered whether customers can distinguish service functions from product functions. Through the case studies on Apple and Nintendo and the survey on the representative 5 IT products, we propose the design factors of products and services for PSS.

• 전기학회논문지
• /
• 제60권12호
• /
• pp.2183-2189
• /
• 2011

Since main portion of the required electric power in Jeju Island is provided from the mainland through two HVDC lines, Jeju HVDC has a most significant impact on Jeju power system. Average wind speed of Jeju Island is the highest among several candidates in South Korea. So, Jeju Island has been a suitable site for the construction of wind farms where several wind farms are now operating and several others to be sited. Since the large-scale wind generation could have adverse impacts on the stable operation of Jeju power system, wind power is also important for the stability of Jeju power system. Therefore, accurate modeling of Jeju HVDC and wind farms is required for stability analysis of Jeju power system. In this paper, PSS/E-based dynamic modeling of Jeju HVDC and DFIG wind farms is proposed. Model-writing technique of PSS/E is used to develop USRAUX model and USRMDL model for controlling the frequency of HVDC and imposing an operation limit of wind power, respectively. Dynamic characteristics of Jeju HVDC and DFIG wind farms are analyzed through the dynamic simulations. The simulation results show the effectiveness of the developed models for Jeju power system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.95-98
• /
• 1996

Response speed of generator/control system kas increased with the aid of the development of power electronics. Even though it is desirable to enhance response speed for the control system(AVR/Gov) of generator itself, in case a certain generator/control system with high response excitation system is connected with bulk power system, terminal voltage and active power of some generators can oscillate with adjoining generators or near area when even a little of disturbance take place. PSS(Power System Stabilizer) is used to damp rotor swing by adding the supplementary signal in phase with speed. As the stable AVR response is very important before PSS is installed, modeling and analysis of generator/control system was performed. Next we have analysed PSS response of Hanlim's gas turbine by transmission line open/close test.

• 한국공간정보시스템학회:학술대회논문집
• /
• 한국공간정보시스템학회 2000년도 학술회의 논문집 3권2호
• /
• pp.93-105
• /
• 2000

GIS는 속성자료와 관련하여 공간자료를 다루는데 강력한 수단이다. 그러나 GIS는 동적인 계획문제(dynamic planning problems)를 다루는데 있어서 분석기능과 인터페이스기능이 부족하다. 의사결정지원 체계(Decision Support Systems: DSS)는 그래픽사용자인터페이스(Graphic User Interface: GUI)기능, 모델링기능과 데이터베이스기능을 제공하여 GIS의 부족한 면을 보완한다. DSS의 새로운 분류인 공간의사 결정지원체계(Spatial Decision Support Systems: SDSS)는 공간차원의 문제를 취급할 시 표현기능, 기본적인 분석기능, 그리고 공간, 비공간자료 취급기능과 같은 GIS의 기능과 그래픽사용자인터페이스기능, 모델링기능, 그리고 데이터베이스기능과 같은 DSS의 기능을 통합한다. 계획지원체계(Planning Support Systems: PSS)는 SDSS의 기능에 더 진보된 공간분석기능과 시간기능을 추가한다. 이 연구에서는 GIS, 가치공학(value engineering: VE), 그리고 생애주기비용(life cycle costing: LCC)에 의한 토지이용계획에 따른 상수도관망의 용량확장을 위한 PSS의 구축에 초점을 맞추고자 한다. 이러한 PSS는 토지이용계획에 따른 상수도 필요량을 공급하고 도시성장 규제를 위한 일련의 용량확장대안을 작성하고 도시성장에 연관되는 상수도관망의 투자에 관한 문제를 다룬다.