• 조명전기설비학회논문지
• /
• 제15권6호
• /
• pp.15-19
• /
• 2001

본 논문은 SSSC와 UPEC의 모델링과 정태해석에 미치는 영향을 분석하였다. SSSC는 선로전류와 90도의 위상차를 갖도록 삽입전압원을 제어함으로써 선로의 유효전력을 제어하도록 하였으며, UPFC는 선로에 직·병렬로 연결된 변압기를 통하여 삽입전압원의 크기와 위상을 제어함으로써 선로의 유효·무효전력과 모선전압을 제어하도록 하였다. 시뮬레이션은 전력계통해석용 소프트웨어인 PSS/E를 사용하였으며, PSS/E의 외부매크로 프로그램인 IPLAN을 사용하여 PSS/E에서 아직 제공되지 않는 SSSC와 UPFC의 모델링 구현하였다. 모의해석 결과 계통변화에 의한 모선전압 변화시에 UPFC에 의한 모선전압 개선의 효과가 SSSC보다 넓은 범위에 걸터 효과적임 을 확인할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.249-250
• /
• 2015

Technological advance of power elcetronic devices using semiconductor switches in last several decades, invoke the increase of switching devices' penetration in the system like STATCOM or HVDC and also, increase the difficulty to adjust switching characteristics in the virtual simulating configuration, which are not capable of reflect the detailed phenomena. To investigate harmful effect of switching devices into the grid, detailed modeling of power electronic devices are necessary, and the first step for entire grid modelling is simulate power system in time domain model. In this paper, simple two bus system with synchronous generator and infinite bus on the other side has been compromised in two simulation environment, using PSS/E and Matlab/Simulink. Comparing the result of two simulation result will give answers to the fundamental difference between two type of simulation environment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전력기술부문
• /
• pp.282-285
• /
• 2001

In general, the PSS/E program based on RMS mathematical models is used for analyzing the steady state and transient stability phenomena of full-scale large power system. Whereas, the EMTDC program unlike PSS/E, studies the specific reduced small-scale power systems as a basis of instantaneous value mathematical models and used to analyze the Electro-Magnetic transient characteristics. The PSS/E provides various control models such as exciter, governor, PSS models and TGOV5 model but there are few control models in EMTDC. In this paper, we developed EMTDC model for TGOV5 of a steam turbine and boiler which represents governor action, main, reheat and low-pressure effects, including boiler effects. The EMTDC model is developed by examining PSS/E control block and using User Define Model(UDM) in addition to default.lib provided by EMTDC. We verify the correctness of developed TGOV5 model with PSS/E and EMTDC simulation results using Governor Step(GSTEP) method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.71-74
• /
• 2001

In general, the PSS/E program based on RMS mathematical models is used for analyzing the steady state and transient stability phenomena of full-scale large power system. Whereas, the EMTDC program unlike PSS/E, studies the specific reduced small-scale power systems as a basis of instantaneous value mathematical models and used to analyze the Electro-Magnetic transient characteristics. The PSS/E provides various control models such as exciter, governor and PSS models, But there are few control models in EMTDC. In this paper, we developed EMTDC models for governor which have been applied in KEPCO system. The EMTDC models are developed by examining PSS/E control block and using User Define Model in addition to default.lib provided by EMTDC. we verify the correctness of developed governor models with PSS/E and EMTDC simulation results using Governor Step(GSTEP) method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.423-425
• /
• 2005

Te digital simulation of electric power system is a very important tool that can decide a proper protection systems from the design of the systems. Protection systems base on the wrong simulation results can cause a serious danger in the stability of the power system. So, the power system makes for simulation and the actual power system must be maximumly homologized. In this paper, protection relay models used in actual systems were developed in the PSS/E.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전력기술부문
• /
• pp.123-125
• /
• 2001

In general, the PSS/E program is used for analyzing KEPCO System in terms of stability and the EMTDC Program is needed to analyze the transient characteristics of power system. The FSS/E provides various control models such as exciter. governor and PSS models whereas there ale few control of models in EMTDC. In this paper. we developed an EMTDC model for IEEET3 exciter which has been applied in KEPCO system. The EMTDC model is developed by examining PSS/E control block and using User Define Model in addition to default.lib provided by EMTDC we verify the correctness of developed IEEET3 model with PSS/E and EMTDC simulation results for the same test system.

• 전기학회논문지
• /
• 제60권12호
• /
• pp.2183-2189
• /
• 2011

Since main portion of the required electric power in Jeju Island is provided from the mainland through two HVDC lines, Jeju HVDC has a most significant impact on Jeju power system. Average wind speed of Jeju Island is the highest among several candidates in South Korea. So, Jeju Island has been a suitable site for the construction of wind farms where several wind farms are now operating and several others to be sited. Since the large-scale wind generation could have adverse impacts on the stable operation of Jeju power system, wind power is also important for the stability of Jeju power system. Therefore, accurate modeling of Jeju HVDC and wind farms is required for stability analysis of Jeju power system. In this paper, PSS/E-based dynamic modeling of Jeju HVDC and DFIG wind farms is proposed. Model-writing technique of PSS/E is used to develop USRAUX model and USRMDL model for controlling the frequency of HVDC and imposing an operation limit of wind power, respectively. Dynamic characteristics of Jeju HVDC and DFIG wind farms are analyzed through the dynamic simulations. The simulation results show the effectiveness of the developed models for Jeju power system.

• 조명전기설비학회논문지
• /
• 제15권5호
• /
• pp.41-45
• /
• 2001

본 논문은 전력계통의 조류해석시에 STATCOM과 UPEC의 모선전압 제어효과를 비교연구하였다. 시뮬레이션은 전력계통의 종합해석용 소프트웨어인 PSS/E를 사용하였으며, PSS/E에서 아직 제공하지 않는 UPFC의 모선 전압에 대한 효과를 해석하기 위해, 선로에서의 유효·무효전력과 모선의 전압이 적절히 제어되고 있는 상황에서 UPFC룰 동기조상기와 부하로 등가하여 나타내었다. 이러한 UPEC의 병렬 인버터가 설치된 모선의 전압제어뿐만 아니라 직렬 인버터를 통하여 선로의 유효·무효전력을 효과적으로 제어함으로써 전력계통의 조류해석시에 STATCOM 보다 넓은 범위의 모선전압을 효과적으로 제어할 수 있음을 확인할 수 있었다.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권9호
• /
• pp.434-440
• /
• 2005

This paper describes an optimized Scheme of reactive-power compensation for the low short-circuit-ratio AC system interconnected with the HVDC system. An HVDC system interconnected with tile low SCR AC system is vulnerable to the ac voltage variation, which brings about the commutation failure of the converter. This problem can be solved using optimized compensation of reactive power. In this study, a benchmark system for HVDC system interconnected with low SCR AC system is derived using PSS/E simulation. Then an optimized srheme for reactive power compensation was derived using integer programming. The feasibility of proposed scheme was analyzed through silnulations with PSS/E and PSCAD/EMTDC. The proposed scheme can compensate the reactive power accurately and minimize the number of switching for harmonic filters and shunt reactors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전력기술부문
• /
• pp.294-296
• /
• 2001

PSS/E offers a power flow model of UPFC in the new version. The Dynamic model was developed in a form of user-define model that is a external function, Now is a stage of verification through variety examples. Importance of this model is in the point which it is necessary for the simulation on the stability. This paper presents the Dynamic model that is defined by user. First. the theory will be discussed, and then for verification on right operation, resultes of application to KEPRI network will be showed.