• Korean Journal of Environmental Biology
• /
• v.41 no.4
• /
• pp.386-399
• /
• 2023

Microplastics and nanoplastics (NMPs) are considered one of hazardous contaminants in marine ecosystems due to their toxic effects, such as reproduction disorder and oxidative stress, on marine organisms. Although water temperature is rising due to global climate change, little information on the toxicological interaction between NMPs and temperature is available. Therefore, in this study, we confirmed the toxicity of NMPs (polystyrene [PS] beads; 0.05- and 6-㎛) on brackish water fleas (Diaphanosoma celebensis) depending on increased temperature (30℃ and 35℃) at individual and molecular levels. In the chronic toxicity test, the group exposed to high temperatures showed an earlier first reproduction time compared to the normal temperatures group, but it was delayed by co-exposure to NMPs at 35℃. Notably, the total reproduction decreased significantly only after 0.05-㎛ PS beads exposure at 30℃. Interaction analysis showed that first reproduction time, modulation of the antioxidant-related gene (GSTS1), heat shock gene (Hsp70), and ecdysteroid pathway-related genes (EcR_A, EcR_B, and CYP314A1) were closely related to temperature and PS beads size. These results indicate that microplastics have size-dependent toxicity, and their toxicity can be enhanced at high temperatures. In addition, higher temperatures and PS beads exposure may have negative effects on reproduction. This study suggests that various factors such as water temperature should be considered when evaluating the toxicity of microplastics in marine ecosystems, and provides an understanding of the complex toxic interaction between water temperature and microplastics for marine zooplankton.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.2
• /
• pp.205-213
• /
• 2012

In this study, the stability of cream containing the ethyl acetate fraction of C. obtusa leaf extract was evaluated. The pH, viscosity, and absorbance were measured under the 4 different temperatures (4, 25, 37 and $45^{\circ}C$) and under the sun light during the 12 weeks. The control cream without containing the extract did not show pH change under the different temperatures mentioned above. However, the pH of the cream with the extract was decreased 0.11 at $4^{\circ}C$ and $25^{\circ}C$. Under the $37^{\circ}C$, $45^{\circ}C$ and sun light condition, the pH was decreased 0.55, 0.84 and 0.59, respectively. After treating the cream for 12 weeks under the different temperatures, the viscosity was measured for the cream containing the extract and control cream. The values were decreased by 2,404 cPs in average compared to the initial value for the former and control cream were decreased by 1,296 cPs in average for the latter. On the other hand, the viscosity of control cream treated under the $45^{\circ}C$ for 12 weeks was decreased (1,915 cPs) relative to the cream containing the extract, which showed 3,810 cPs decrease in viscosity. The cream containing the extract did not show absorbance change at $4^{\circ}C{\sim}37^{\circ}C$ for 12 weeks. Instead, the absorbance of the cream treated under $45^{\circ}C$ and sun light condition was decreased 32.5 % and 35.2 %, respectively. This decrease in absorbance is relatively small compared to the 54.8 % decrease of the extract sampled from the cream using ethanol solution. This indicates that the extract is stabilized in the cream. In addition, any change in color or smell was not observed through 12 weeks of the experimental time period. Also physical changes as creaming and cohesion were not shown. The results show that the cream containing C. obtusa leaf extract was relatively stable. However, it is concluded that it is still not clear in the stability of the cream containing the extract when it is stored for a long time. Accordingly, it is suggested that further study is needed for the application of the extract to cosmetics.

• Membrane Journal
• /
• v.6 no.3
• /
• pp.157-165
• /
• 1996

Polysulfone(PS) membranes were prepared from homogeneous PS solutions by the phase inversion technique. When propionic acid(PA) was added into a casting solution of n-methylpyrrolidone(NMP) and PS, precipitation rate of the solution film was accelerated. This kind of acceleration was consistent, even though a precipitating nonsolvent was changed from water to isopropanol. These phenomena were caused by decrease of nonsolvent tolerance in the casting solution due to addition of PA. PS powder was prepared by precipitation of a 3wt% solution in dimethylformamide(DMF) using ethanol as nonsolvent. Gas adsorption analysis of the powder showed that the capillary condensation sites were found in the powder structure. Membranes prepared from PS solution(15wt%) in NMP had the following characteristics of gas adsorption and water permeation. In gas adsorption analysis, the membrane precipitated using isopropanol showed low uptake of nitrogen gas and the capillary condensation sites were not found. On the contrary, a significant amount of the capillary condensation sites was found in the membrane coagulated by water, which was related to increase of nitrogen uptake. tn the membrane prepared froin the solution including PA, an increase of the Henry's law sites and the Langmuir sites was not found clearly. However, the capillary condensation sites were significantly increased, and the water transport also increased.

• Journal of the Korea Institute of Building Construction
• /
• v.6 no.3 s.21
• /
• pp.107-114
• /
• 2006

In this study, the experiment was carried out to investigate and analyze the engineering properties of concrete using fine aggregate of PS bal slagl. The main experimental variables were water/cement ratio 30, 40, 50(%), water content $170kg/m^3$, replacement ratio of slag fine aggregate 0, 25, 50, 75(%) in experiment I and water/cement ratio 30, 40, 50(%), water content 165, 170, 175($kg/m^3$), replacement ratio of fine aggregate of PS ball 0, 50 in experiment II. According to the test results, the principle conclusions are summarized as follows (1) The workability of slag fine aggregate-mixed concrete tends to improve, as the replacement rate increases. (2) The air content of slag fine aggregate-mixed concrete tends to decrease, as the replacement rate increases. (3) The unit volume weight of slag fine aggregate-mixed concrete tends to significantly increase, as the replacement rate increases. (4) The compressive strength of slag fine aggregate-mixed concrete tends to show more increasing propensity, in case the curing period is relatively long, as the replacement rate increases.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.5
• /
• pp.1534-1538
• /
• 2011

Uniform, hollow nanosilica spheres were prepared by the chemical coating of cationic polystyrene (cPS) with tetraethylorthosilicate (TEOS), followed by calcination at 600 $^{\circ}C$ under air. cPS was synthesized by surfactant-free emulsion polymerization using 2,2'-azobis (2-methyl propionamidine) dihydrochloride as the cationic initiator, and poly(vinyl pyrrolidone) as a stabilizer. The resulting cPS spheres were 280 nm in diameter, and showed monodispersion. After coating, the hollow silica product was spherically shaped, and 330 nm in diameter, with a narrow distribution of sizes. Dispersion was uniform. Wall thickness was 25 nm, and surface area was 96.4 $m^2/g$, as determined by BET. The uniformity of the wall thickness was strongly dependent upon the cPS surface charge. The effects of TEOS and ammonia concentrations on shape, size, wall thickness, and surface roughness of hollow $SiO_2$ spheres were investigated. We observed that the wall thicknesses of hollow $SiO_2$ spheres increased and that silica size was simultaneously enhanced with increases in TEOS concentrations. When ammonia concentrations were increased, the irregularity of rough surfaces and aggregation of spherical particles were more severe because higher concentrations of ammonia result in faster hydrolysis and condensation of TEOS. These changes caused the silica to grow faster, resulting in hollow $SiO_2$ spheres with irregular, rough surfaces.

• 한국생물공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.801-806
• /
• 2003

Pseudomonas sp. BCNU 106 accumulated approximately 4.12 mM trehalose after cultivation of 12 hr probably by the arising action of trehalose-6-phosphate synthase/phosphatase. The cDNA clones of trehalose-6-phosphate synthase/ phosphatase were isolated from Pseudomonas sp. BCNU 106, and named as PsTPS and PsTPP(Pseudomonas sp. BCNU 106 trehalose-6-phosphate synthase/phosphatase). The two mRNA levels of trehalose-6-phosphate synthase/ phosphatase peaked at 12 hr after exposure to toluene, and thereafter were declined slightly These results support an important role of trehalose accumulation by expressions of PsTPS and PsTPP in toluene-tolerance of Pseudomonas sp. BCNU 106.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.6
• /
• pp.841-849
• /
• 2012

The effluent quality of phosphorus is strengthened by the national standard to conserve water resources to lessen the eutrophication threat. The soluble phosphate in the wastewater effluent can be removed using the converter slag as solid waste produced through the steel making process. The experiments for removal efficiencies and removal constants were performed for this research with the artificial wastewater following several different conditions, particle size, phosphate concentration and initial pH. The correlation coefficients of Freundlich adsorption isothem were 0.9505 for $PS_A$, 0.9183 for $PS_B$, respectively. The removal efficiency was 87-94 % for $PS_A$ and 90-96 % for $PS_B$ respectively. The pH of the wastewater was elevated to pH 11.8 for the initial pH 8.5, phosphate removal efficiency was the highest as 84 % ~ 98 %. In case of 10 mg/L of the intial phosphate, the removal efficiency was 96 ~ 98 %. The more initial pH increases, the higher the reaction rate constant is.

• Journal of the Korean Institute of Gas
• /
• v.4 no.1 s.9
• /
• pp.16-25
• /
• 2000

To estimate the thermal characteristics and toxic parameters on styrene copolymers, We have investigated the activation energy, physical features and generation possibility of toxic material like narcotic gases. The activation energy was 25${\~}$50 Kcal/mol by the Kissinger's and DSC method at high temperature decomposition. It will be good information to estimate the possibility of fire occurrence. From calculations of FED, the values of $LC_{50}$ for PS, SAN and ABS were checked as 8,580, 265 and 308 $mg/m^3$ The mechanisms of thermal decomposition were mainly estimated by main chain scission, not by side group on FT-IR analysis.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.6
• /
• pp.516-521
• /
• 2005

Drug delivery to the lymphatic system may be important in terms of the treatment with lymphatic involvement, such as tumor metastases and immunization. Especially, drug transport via the intestinal lymphatics after oral administration has been attracted lots of interests. The purpose of this study was to prepare cyclosporin A (CSA)-loaded liposomes, with different characteristics, and evaluate their mucoadhesivity. Three liposome preparations were formulated: cationic stearylamine liposomes (SA-Lip), anionic phosphatidylserine liposomes (PS-Lip), Polymer (chitosan)-coated liposomes (CS-Lip), and characterized. The liposome preparations were found to be spherical in shape, with PS-Lip being the smallest. The liposome preparations exhibited entrapment efficiencies in the order: PS-Lip $(52.5{\pm}2.9%)$ > SA-Lip $(48.8{\pm}3.3%)$ > CS-Lip $(41.7{\pm}4.2%)$. Finally, mucoadhesive tests were carried out using rat intestine, with SA-Lip (67%) showing the best adhesive rate of the three preparations (PS-Lip: 56%, CS-Lip: 61%). These results suggest that a positive charge on the surface of drug carriers may be an important factor for the intestinal drug delivery.

• Food Science and Biotechnology
• /
• v.15 no.6
• /
• pp.877-883
• /
• 2006

The immunostimulatory activities of Lactobacillus plantarum, the major microorganism in kimchi fermentations were investigated. Five strains of L. plantarum exhibited weak immunopotentiating activity, but L. plantarum PS-21 showed as strong a mitogenic activity as Bifidobacterium adolescentis M101-4, a known positive strain. It is of interest that, L. plantarum PS-21 stimulated proliferation of Peyer's patch cells, one of the most important tissues in the gut-associated lymphoreticular system. Cell' wall fractions from L. plantarum PS-21 also showed strong mitogenic activity compared with the soluble cytoplasmic fraction. A peptidoglycan fraction (PG) extracted from the cell wall of L. plantarum PS-21 was identified as an active mitogenic component when used in murine lymph node and spleen cell test systems. PG showed dose-dependent mitogenic activity and significantly enhanced antibody production in lymph node cells when studied in vitro. The lysosomal enzyme activity of murine peritoneal macrophages was increased when analyzed following injection of PG to the host animal. Furthermore, PG enhanced the production of cytokines such ($TNF-{\alpha}$ and IL-6) in the in vitro culture of RAW 264.7 macrophage cells.