• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.29 no.1
• /
• pp.9-17
• /
• 2006

This paper considers a six sigma project for improving productivity of the brace complement center pillar. The project follows a disciplined process of fife phases: define, measure, analyze, improve, and control. A process map is used to identify process input and output variables. Eleven key process input variables are selected by using X&Y matrix and FMEA, and finally eight vital few input variables are selected from analyze phase. The optimum process conditions of the vital few input variables are jointly obtained by maximizing productivity of the brace complement center pillar using DOE and alternative selection method.

• Design & Manufacturing
• /
• v.16 no.3
• /
• pp.50-57
• /
• 2022

The qualities of the products produced by injection molding are strongly influenced by the process variables of the injection molding machine set by the engineer. It is very difficult to predict the qualities of the injection molded product considering the stochastic nature of the manufacturing process, since the processing conditions have a complex impact on the quality of the injection molded product. It is recognized that the artificial neural network(ANN) is capable of mapping the intricate relationship between the input and output variables very accurately, therefore, many studies are being conducted to predict the relationship between the results of the product and the process variables using ANN. However in the condition of a small number of data sets, the predicting performance and robustness of the ANN model could be reduced due to too many input variables. In the present study, the ANN model that predicts the length of the injection molded product for multiple combinations of process variables was developed. And the accuracy of each ANN model was compared for 8 process variables and 4 important process inputs that were determined by the feature selection. Based on the comparison, it was verified that the performance of the ANN model increased when only 4 important variables were applied.

• Journal of Korean Society for Quality Management
• /
• v.52 no.2
• /
• pp.185-199
• /
• 2024

Purpose: The improvement of yield and quality in product manufacturing is crucial from the perspective of process management. Controlling key variables within the process is essential for enhancing the quality of the produced items. In this study, we aim to identify key variables influencing product defects and facilitate quality enhancement in CNC machining process using SHAP(SHapley Additive exPlanations) Methods: Firstly, we conduct model training using boosting algorithm-based models such as AdaBoost, GBM, XGBoost, LightGBM, and CatBoost. The CNC machining process data is divided into training data and test data at a ratio 9:1 for model training and test experiments. Subsequently, we select a model with excellent Accuracy and F1-score performance and apply SHAP to extract variables influencing defects in the CNC machining process. Results: By comparing the performances of different models, the selected CatBoost model demonstrated an Accuracy of 97% and an F1-score of 95%. Using Shapley Value, we extract key variables that positively of negatively impact the dependent variable(good/defective product). We identify variables with relatively low importance, suggesting variables that should be prioritized for management. Conclusion: The extraction of key variables using SHAP provides explanatory power distinct from traditional machine learning techniques. This study holds significance in identifying key variables that should be prioritized for management in CNC machining process. It is expected to contribute to enhancing the production quality of the CNC machining process.

• Journal of Biosystems Engineering
• /
• v.38 no.1
• /
• pp.33-40
• /
• 2013

Purpose: The goal of this study was to build an accurate digital factory that evaluates the performance of a factory using computer simulation. To achieve this goal, we evaluated the effect of worker-related variables on production in a simulation model using comparative analysis of two cases. Methods: The overall work process and worker-related variables were determined and used to build a simulation model. Siemens PLM Software's Plant Simulation was used to build a simulation model. Also, two simulation models were built, where the only difference was the use of the worker-related variable, and the total daily production analyzed and compared in terms of the individual process. Additionally, worker efficiency was evaluated based on worker analysis. Results: When the daily production of the two models were compared, a 0.16% error rate was observed for the model where the worker-related variables were applied and error rate was approximately 5.35% for the model where the worker-related variables were not applied. In addition, the production in the individual processes showed lower error rate in the model that included the worker-related variables than the model where the worker-related variables were not used. Also, among the total of 22 workers, only three workers satisfied the IFRS (International Financial Reporting Standards) suggested worker capacity rate (90%). Conclusions: In the daily total production and individual process production, the model that included the worker-related variables produced results that were closer to the real production values. This result indicates the importance of worker elements as input variables, in regards to building accurate simulation models. Also, as suggested in this study, the model that included the worker-related variables can be utilized to analyze in more detail actual production. The results from this study are expected to be utilized to improve the work process and worker efficiency.

• Communications for Statistical Applications and Methods
• /
• v.21 no.2
• /
• pp.161-168
• /
• 2014

In mixture experiments with process variables, we consider the case that some of process variables are either uncontrollable or hard to control, which are called noise variables. Given the such mixture experimental data with process variables, first we study how to search for candidate models. Good candidate models are screened by the sequential variables selection method and checking the residual plots for the validity of the model assumption. Two methods, which use numerical optimization methods proposed by Derringer and Suich (1980) and minimization of the weighted expected loss, are proposed to find a cost-effective robust optimal condition in which the performance of the mean as well as the variance of the response for each of the candidate models is well-behaved under the cost restriction of the mixture. The proposed methods are illustrated with the well known fish patties texture example described by Cornell (2002).

• Journal of the Korea Society for Simulation
• /
• v.7 no.2
• /
• pp.137-152
• /
• 1998

One of the components that constitute the simulation models is the state variables whose values are determined by the time related simulation process. Embedding rule-based expert systems into the simulation models should provide a systematic way of handling these time-dependent variables without distracting the essential problem solving capabilities of the expert systems which are well suited for expressing the decision making function of complex cases. The expert system, however, is inefficient in dealing with the time elapsing characteristics of target system compare to the simulation models. To solve the problem, this paper provides an interruptible inference engine whose inferencing process can be interrupted when the variables' value, which are used as the parameters of the rules, are not yet determined due to the time dependent nature of the state variables. The process is resumed when the variables are ready. The elapse of time is calculated by time-advance function of the simulation model to which the expert system has been embedded. The example modeling shown exploits the embedded interruptible inferencing capability for the controlling and monitoring of metal grating process.

• Tribology and Lubricants
• /
• v.38 no.1
• /
• pp.1-7
• /
• 2022

Chemical-mechanical polishing (CMP) process is a semiconductor process that planarizes a wafer surface using mechanical friction between a polishing pad and a substrate surface during a specific chemical reaction. During the CMP process, polishing pad conditioning is applied to prevent the rapid degradation of the polishing quality caused by polishing pad glazing through repeated material removal processes. However, during the conditioning process, uneven wear on the polishing pad is inevitable because the disk on which diamond particles are electrodeposited is used. Therefore, the abrasion of the polishing pad should be considered not only for the variables during the conditioning process but also when designing the CMP conditioning system. In this study, three design variables of the conditioning system were analyzed, and the effect on the pad wear profile during conditioning was investigated. The three design variables considered in this study were the length of the conditioner arm, diameter of the conditioner disk, and distance between centers. The Taguchi method was used for the experimental design. The effect of the three design variables on pad wear and uniformity was assessed, and new variables used in conditioning system design were proposed.

• Journal of Korean Society for Quality Management
• /
• v.29 no.3
• /
• pp.166-176
• /
• 2001

This paper considers a six sigma project for reducing the color variation of the monitor materials in a chemical plant. The project follows a disciplined process of five macro phases: define, measure, analyze, improve, and control (DMAIC). A process map is used to identify process input variables. Three key process input variables are selected by using an input variable evaluation table; a melting pressure, a coloring agent, and a DP color variation. DOE is utilized for finding the optimal process conditions of the three key process input variables. The sigma level of defects rate becomes a 4.58 from a 2.0 at the beginning of the project.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.05a
• /
• pp.487-493
• /
• 2004

This paper consider a six sigma project for improving the TIP life time in a spot welding process. The project follows a disciplined process of five phases: define, measure, analyze, improve, and control. A process map is used to identify process input and output variables. Nine key process input variables are selected by using C&E matrix and FMEA, and finally four vital few input variables are selected from analyze phase. The optimum process conditions of the four vital few input variables are jointly obtained by maximizing TIP life time using DOE.

• Journal of Welding and Joining
• /
• v.15 no.3
• /
• pp.118-127
• /
• 1997

With the trend towards welding automation and robotization, mathematical models for studying the influence of various variables on the weld bead geometry in gas metal arc (GMA) welding process are required. Partial penetration, single-pass bead-on-plate welds using the GMA welding process were fabricated in 12mm mild steel plates employed four different process variables. Experimental results has been designed to investigate the analytical and empirical formulae, and develop mathematical equations for understanding the relationship between process variables and weld bead geometry. The relationships can be usefully employed not only for open loop process control, but also for adaptive control provided that dynamic sensing of process output is performed.