• Parasites, Hosts and Diseases
• /
• v.21 no.2
• /
• pp.116-186
• /
• 1983

An epidemiological study on Clonorchis sinensis infection along the Nam-river (total length ; 186km) flowing in Gyeongsang-nam-do, southern part of Korea, was carried out. Formalin-ether concentration technique and Stoll's egg counting method were employed to figure out the prevalence of C. sinensis infection. For the detection of cercariae from Parafossarulus sp., the snail host of C. sinensis, each snail was placed in aerated tap water, and examined for expelled cercariae. For observing the metacercariae the fresh water fish favorably eaten in raw conditions wore prepared by means of pressing the muscles between two slide glasses and/or by digesting them with artificial gastric juice. The fresh water fish were fed to the rabbits to get the worms and to identify the morphology of adult C. sinensis. The results are summarized as follows: 1. Overall Prevalence of C. sinensis infection was 38.75 from 5,291 examinees; 44.15 (1,408 out of 3,196) in male and 30.4% (637 out of 2,095) in female. 2. The prevalence rates were 42.0% at the upper stream, 41.2% around the vicinity of Jinyanglake, 34.2% at Jinju city, 34.2% at middle stream and 40.3% at down stream regions, respectively. 3. By age, the highest positive rate (53.4∼54.3%) was observed in 30 to 59 years of age. In this age group, the rate in males was 59.7∼62.2%, and in females 42.2∼44.4%, In the age group of less than 19 years it was 7.5∼20.9%. 4. By social strata, the positive rate was 16.5% in the primary school children, 22.6% in school students, 46.2% in teachers and local officers and 49.6% in the general inhabitants. 5. The quantitative examinations with the stool collected from clonorchiasis cases revealed that the light infection (less than 4,000/EPG) was 53.6%, moderate infection (4,001∼10,000 /EPG) 30.3% and heavy infection (more than 10,001/EPG) 16.1%, respectively. More than half of total cases examined were light infection, and 73.2% of female examinees were lightly infected with this cuke. 6. The average value of EPG was 4,963 (male, 6,057; female, 2,557 and the highest value was obtained from the age group of 30 to 59 years (5,240∼6,454). 7. The prevalence of Metagonimus yokogawai infection in humans was 5.5%, and 89.8% of metagonimiasis cases wore double-infected arith C. sinensis. The highest prevalence rate was observed in Jinju city (11.2%). 8. Total of 5,005 Parafossarulus sp., the snail intermediate host of C. sinensis, were examined for the detection of cercariae. The cercarial expulsion rate was 0.34%, and the snails collected in Jin-yang-lake side and in the down stream expelled mainly the cercariae of C, sinensis. 9. About 788 cercariaejday (range: 127∼1,503) were expelled daily from a snail naturally infected with C. sinensis. The snails which released more than 1,000 cercariae/day were 30.8% out of total collected. A snail uniquely released 5,840 cercariae/day in this study. 10. The other trematode cercariae besides C. sinensis were also detected, and the rates out of total snails were the cercariae of Losogenes liberum 6.71%, Cyathocotyle orientalis 0.26%, Notocotylus attenuatus 2.52% and Mucobucaris 0.54%, 11. Ten out of 18 species of fresh water fish caught along the river harbored the metacercariae of C, sinensis. The highest rate of metacercarial infection in fish was detected in Pseudorasbora larva (85.9%). The fish mainly eaten by the inhabitants along the Nam-river, and the metacercarial infection rates were: Zacco platypus 8.0%, Hemibarbus sp. 18.2∼26.7%, Gnathepcgcn sp. 37.5%, Ischikauia steenackeri 42.9% and Pseudogobio esocinus 16.7%. 12. Out of 36 P. larva, the number of metacercariae were about 109 (ranEe; 18∼446) per fish and 27 per gram of flesh. The fish caught in spring harbored the highest number of metacercariae. As indicated above, the prevalence of C. sinensis infection in the inhabitants residing around the Nam-river was relatively high. The farther toward the upper stream areas, the higher was the positive rate of C. sinensis infection, and most of clonorchiasis cases were lightly infected. The snail hosts of C. sinensis distributed all around the Nam-river. Several species of freshwater fish were infected with the metacercariae of C. sinensis and the infection rates were relatively high. To prevent C. sinensis infection in the endemic areas, the effective health education system is suggested as a control measure, although mass treatment is also expected to be useful, using chemotherapeutic agents such as "praziquantel", a recently developed anthelminthic for C. sinensis inftraction.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.3
• /
• pp.543-560
• /
• 2018

With the increased development in downtown underground space facilities that vertically cross under a railway at a shallow depth, the demand for non-open cut method is increasing. However, most construction sites still adopt the pipe roof method, where medium and large diameter steel pipes are pressed in to form a roof, enabling excavation of the inside space. Among the many factors that influence the loosening region and loads that occur while pressing in steel pipes, the size of the pipe has the largest impact, and this factor may correspond to the magnitude of load applied to the underground structure inside the steel pipe roof. The super equilibrium method (SEM) has been developed to minimize ground disturbance and loosening load, and uses small diameter pipes of approximately 114 mm instead of conventional medium and large diameter pipes. This small diameter steel pipe is called an SEM pile. After SEM piles are pressed in and the grouting reinforcement is constructed, a crossing structure is pressed in by using a hydraulic jack without ground subsidence or heaving. The SEM pile, which plays the role of timbering, is a fore-poling pile of approximately 5 m length that prevents ground collapse and supports surface load during excavation of toe part. The loosening region should be adequately calculated to estimate the spacing and construction length of the piles and stiffness of members. In this paper, we conducted a comparative analysis of calculations of loosening load that occurs during the press-in of SEM pile to obtain an optimal design of SEM. We analyzed the influence of factors in main theoretical and empirical formulas applied for calculating loosening regions, and carried out FEM analysis to see an appropriate loosening load to the SEM pile. In order to estimate the soil loosening caused by actual SEM-pile indentation and excavation, a steel pipe indentation reduction model test was conducted. Soil subsidence and soil loosening were investigated quantitatively according to soil/steel pipe (H/D).

• Korean Journal of Materials Research
• /
• v.11 no.8
• /
• pp.629-635
• /
• 2001

To improve the ductility of $A1_3Hf$ intermetallics, which are the potential high temperature structural materials, the mechanical alloying behavior. the effect of Cu addition on the $Ll_2$ phase formation and the behavior of vacuum hot-pressed consolidation were investigated. During the mechanical alloying by SPEX mill, the $Ll_2 A1_3Hf$ intermetallics with the grain size of 7~8nm was formed after 6 hours of milling in Al-25at.%Hf system. The $Ll_2$ Phase of Al_3Hf$ intermetallics with the addition of 12.5at.%Cu, similar to that of the binary Al-25at.% Hf, was formed, but the milling time necessary for the formationof the $Ll_2$ phase was delayed form 6 hours to 10 hours. The lattice parameter of ternary $Ll_2(Al+Cu)_3Hf$ intermetallics decreased with the increase of Cu content. The onset temperature of $Ll_2$ to $D0_{23}$ phase in $Al_3Hf$ intermetallics was around 38$0^{\circ}C$, the temperature upon completion varied from 48$0^{\circ}C$ to 5$50^{\circ}C$ as the annealing time. The onset temperature of $Ll_2$ to $D0_{23}$ phase transformation in $(Al+ Cu)_3Hf$ intermetallics increased with the amount of Cu and the highest onset temperature of $700^{\circ}C$ was achieved by the Cu addition of 10at.%. The relative density increased from 89% to 90% with the Cu addition of 10at.% in $Al_3Hf$ intermetallics hot-pressed in vacuum under 750MPa at 40$0^{\circ}C$ for 3 hours. The relative density of 92.5% was achieved without the phase transformation and the grain growth as the consolidation temperature increased from 40$0^{\circ}C$ to 50$0^{\circ}C$ in $(Al+Cu)_3Hf$ intermetallics hot-pressed in vacuum under 750MPa for 3 hours.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.4
• /
• pp.172-179
• /
• 2006

When $Al_2O_3-MoO_3$ mixture is reduced, $MoO_3$ is only reduced to Mo at $900^{\circ}C$. But a compound between $Al_2O_3$ and Mo is not formed up to $1300^{\circ}C$. In the case of $Al_2O_3-MoO_3-MnO_2$ mixture, an intermediate compound $Mn_2Mo_3O_8$ is firstly formed at $900^{\circ}C$ and changes to $MnAl_2O_4$ at $1100^{\circ}C{\sim}1300^{\circ}C$. $Al_2O_3/Mo/MnO_2$ composite are manufactured by a selective reduction process in which Mo is only reduced in the powder mixture of $Al_2O_3,\;MoO_3\;and\;MnO_2$ oxide. For $Al_2O_3/Mo$ composite, the average grain size was not changed with increasing Mo content because of inhibition of grain growth of $Al_2O_3$ matrix in the presence of Mo particles. Fracture strength increased with increasing Mo content due to phenomenon of grain growth inhibition of $Al_2O_3$ matrix. Hardness decreased because of a lower hardness value of Mo, whereas fracture toughness increased. For $Al_2O_3,\;Mo\;and\;MnO_2$ composite, grain growth was facilitated by MnOB and it showed a lower fracture strength because of grain growth effect with increasing Mo and $MnO_2$ content. Hardness decreased because of the grain growth of matrix and coalesced Mo particles to be located in grain boundary, whereas fracture toughness increased.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.3
• /
• pp.283-294
• /
• 2020

In this study, in order to increase the utilization of Citrus junos seeds, which account for 13% of the weight ratio of Citrus junos ripened fruit, but are mostly discarded and not utilized, the efficacy of skin beauty of Citrus junos seed oil extracted by cold pressing was studied. Citrus junos seed oil was found to contain approximately 74% of unsaturated fatty acids consisting mainly of oleic acid and linoleic acid, and limonene, which is mainly contained in Citrus junos peel, contained a very low content of about 0.0187%. As a result of evaluating the DPPH radical scavenging activity of Citrus junos seed oil, 26% of DPPH radical scavenging ability was confirmed at 5% concentration of Citrus junos seed oil. To confirm the anti-inflammatory effect, as a result of testing RAW 264.7 cytotoxicity test and NO production for Citrus junos seed oil, NO production was suppressed by 53% at a concentration of 0.05% that does not show cytotoxicity. In addition, in the RBL-2H3 cytotoxicity and β-hexosaminidase release inhibitory efficacy test for anti-allergic efficacy confirmation, it was confirmed that β-hexosaminidas release was suppressed by 26% at a concentration of 0.05% that did not show cytotoxicity. Lastly, in the human skin application test result of O/W emulsion containing 5% of Citrus junos seed oil, it showed higher skin moisturizing effect than the control emulsion containing the same amount of caprylic/capric triglyceride. Therefore, it is thought that Citrus junos seed oil might be used as a excellent skin care material.

• Food Science and Preservation
• /
• v.13 no.2
• /
• pp.186-191
• /
• 2006

Prunus mume is extensively cultivated as a fruit and medicinal plant in Korea. Recently, prunus mume has a pressing problem with an increase of prunus mume cultivation area in southern part in Korea. Chemical properties of prunus mume flower to determine the optimum processing varieties for tea were investigated. Three kinds of samples treated with fresh, freeze dry and shade dry were used. The content of moisture, crude ash, crude protein, crude fiber, crude fat and nitrogen free extract of prunus mume flower varieties were to $82{\sim}85%,\;0.2{\sim}0.6%,\;2.5{\sim}3.1%,\;2.5{\sim}3.1%,\;0.6{\sim}0.8%\;and\;10{\sim}11%$ respectively. The main component of free sugars in prunus mume flower was glucose and those of organic acids were citric and malic acids. 17 kinds of amino acids were determined from prunus mume flower. The total amino acid contents of Cheongchuk, Baeagaha and Goseong were 760.47 mg%, 624.01 mg% and 807.41 mg%, respectively. Aspartic acid, glutamic acid and lysine were the major component in 3 cultivars. The content of K was much higher than Ca, Mg, Na, fe and Zn. The major fatty acids of prunus mume flower were myristic acid, palmitoleic acid me oleic acid. As a result of analysis, there were no significant differences among the three cultivars of prunus mume flower and drying method.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.323-323
• /
• 2017

In many sub-Saharan African countries, boosting rice production is a pressing food security issue. To contribute to the increase in rice production, we have developed lines of NERICA 1 introgressed with the gene for spikelet number, Gn1a, and the gene for primary rachis-branch number, WFP by cross breeding. The performance of rice lines introgressed with the genes for yield related traits can be affected by cultivation environment and management. Thus, in this study, we aimed to evaluate the lines of NERICA 1 introgressed with Gn1a or/and WFP for yield and yield components under different nitrogen fertilization conditions in Kenya. A field trial was conducted at a paddy field in Kenya Agricultural and Livestock Research Organization-Mwea, Kirinyaga County ($0^{\circ}39^{\prime}S$, $0^{\circ}20^{\prime}E$) from August 2016 to January 2017. Eight lines of NERICA 1 introgressed with Gn1a and/or WFP, and their parents, NERICA 1 and ST12, were grown under 0 (NF) and $75(SF)kg\;N\;ha^{-1}$. At maturity, five hills per plot were harvested to determine the yield and yield components. The number of primary and secondary rachis-branches per panicle was measured on the longest panicle in each hill. Under SF, the introgression of WFP to NERICA 1 increased the number of primary and secondary rachis-branches by 27 and 25%, respectively. On the other hand, Gn1a did not increase the number of primary rachis-branches, whereas the number of secondary rachis-branches was increased by 38% on average. The number of primary and secondary rachis-branches of the lines introgressed with both genes increased by 25 and 56%, respectively. Although grain number per panicle increased 33% by Gn1a, 34% by WFP, and 43% by Gn1a+WFP, the yield increase by Gn1a, WFP, and Gn1a+WFP was only 14, 7, and 14%, respectively. The suppression of the yield increase was mainly attributed to the decline in the filled grain ratio. Under NF, WFP increased the number of primary and secondary rachis-branches by 20 and 19%, respectively. The introgression of both genes increased the former and the later by 19 and 35%, respectively. However, Gn1a did not change them under NF. Thus, even under NF, grain yield increased 11% by WFP and 24% by Gn1a+WFP due to the increased grain number although filled grain ratio declined. Our findings suggest that the introgression of Gn1a and WFP could contribute to the rice productivity improvement in sub-Saharan Africa even under low fertility conditions. Improving filled grain ratio of the lines introgressed with these genes by further breeding and fertilization management will be the focus of subsequent work.

• Journal of Oral Medicine and Pain
• /
• v.32 no.4
• /
• pp.421-429
• /
• 2007

Some researchers suggested that tactile sensor system would be useful in evaluating masticatory muscles of TMD patients, but there were few studies on the effects of chewing with time. The aim of this study was to investigate the change of elasticity and stiffness for masseter and temporal muscles of normal subjects before, during and after gum chewing and to obtain the baseline data for further researches on the elasticity and stiffness for masticatory muscles of TMD patients. Stiffness and elasticity of their anterior temporalis and inferior masseter muscle were measured bilaterally by a tactile sensor system. Each subject was instructed to sit on a chair for evaluation of masticatory muscles. Before operating the sensor, the thickest skin area over anterior temporalis and inferior masseter muscles were selected as the points to be pressed by a tactile sensor, and marked with a pen. While the teeth of subjects were lightly contacted, the probe of the tactile sensor was placed perpendicularly over the marked point over the skin, followed by computer-controlled movement including gently pressing straight down on the muscle for a second and retracting. All subjects were instructed to chew gum (Excellent Breath, Taiyo Co., Japan) bilaterally with a velocity of 2 times per second for 40 minutes after the first measurement had been performed for the baseline data of all subjects. The measurements had been repeated during chewing with 10 minutes of interval and continued for 40 minutes with same interval after chewing. Resultantly, the decrease of elasticity and the increase of stiffness in masticatory muscles can be seen significantly within 10 minutes after chewing and those were maintained during chewing without significant change with chewing time. The elasticity of muscles was recovered within 10 minutes after stopping chewing, but the stiffness was recovered more lately than elasticity by about 10 minutes. Based on these results, it can be concluded that elasticity and stiffness of muscles would be good indicators to evaluate the masticatory muscles objectively, when more supported by further researches.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.452-452
• /
• 2014

블랑켓 일차벽이나 디버터와 같은 핵융합로 플라즈마 대향부품은 플라즈마로부터 입사되는 중성자 및 입자들을 차폐하여 구조물을 보호하고, 발생열을 에너지로 변환하기 위해 냉각재를 활용한 열제거 기능을 담당한다. 특히, 고속중성자와 입사 열부하 및 여러 입자들로부터 블랑켓 및 내부 구조물을 보호하기 위해 차폐체와 구조물로 구성된다. 세계적으로 차폐체로서는 텅스텐 혹은 텅스텐 합금, 구조물용 재료로는 저방사화 Ferritic Martensitic (FM) 강이 유력한 후보재료로 개발, 연구 중에 있다. 국내에서는 국제핵융합로(ITER) 사업을 통해 고온등방가압(HIP, Hot Isostatic Pressing)을 이용한 이종금속간 접합기술과 한국형 저방사화 고온구조재료인 ARAA (Advanced Reduced Activation Alloy)가 개발되고 있으며, 이를 활용한 설계, 접합법 개발, 제작목업의 건전성 평가 등이 수행되고 있다. 한국원자력연구원에서는 핵융합 기초사업의 일환으로 전북대와 공동으로 수행 중인 건전성 평가체계 개발을 위해, 기 개발된 접합법을 활용한 $45mm(H){\times}45mm(W){\times}2mm(T)$의 W/FM강 목업을 제작한 바 있으며, 이를 국내 구축된 고열부하 시험 장비인 KoHLT-EB (Electron Beam)를 활용한 고열부하 인가 건전성 평가시험을 준비 중에 있다. 이종금속간 접합 특성은 기계적 평가를 위한 파괴시험을 통해 검증, 이를 활용한 목업이 제작되었으며, 제작된 목업에 대한 초음파를 이용한 접합면의 비파괴 검사를 통해 결함이 없음을 확인하였다. 최종적으로 실제 사용되는 핵융합 운전조건과 유사 혹은 가혹한 조건에서 고열부하를 인가하여, 그 건전성을 평가가 이루어질 것이다. 고열부하 시험을 위해서는 냉각조건, 인가 열부하, 수명평가를 통한 반복 고열부하 인가 횟수 등이 사전에 결정되어야 한다. 이를 위해 상업용 열수력, 구조해석 코드인 ANSYS-CFX와 -mechanical을 이용한 시험조건 모의 및 수명 평가가 수행되었다. 구축 장비의 냉각계통을 고려하여 냉각수의 온도 및 속도는 $25^{\circ}C$, 0.15 kg/sec로, 열부하는 0.5 및 $1.0MW/m^2$에 대해 모의를 수행하였다. 정상상태 시 텅스텐의 최대 온도는 각 열부하 조건에 따라 $285.3^{\circ}C$와 $546.8^{\circ}C$였으며, 이에 도달하는 시간을 구하기 위해 천이해석을 수행하였고, 이를 통해 30초에 최대온도 95 %이상의 정상상태 온도에 도달함을 확인하였다. 또한, 목업의 초기 온도에 도달하는 냉각시간도 동일한 천이해석을 통해 30초로 가능함을 확인하였고, 최종 시험 조건을 30초 가열, 30초 냉각으로 결정하였다. 결정된 반복 열부하 인가 조건에서 이종금속 접합체가 받는 다른 열팽창 정도에 따른 응력을 계산하여 목업의 수명을 도출하였고, 이를 시험해야 할 반복 횟수로 결정하였다. 각 열부하 조건에 따른 온도조건을 ANSYS-mechanical 코드를 활용하여 열팽창과 이에 따른 접합면의 응력분포로 계산하였다. 0.5 및 $1.0MW/m^2$에 대해, 목업이 받는 최대 응력은 334.3 MPa와 588.0 MPa 였으며, 이 때 텅스텐과 FM강이 받는 strain을 도출하여 물성치로 알려진 cycle to failure 값을 도출하였다. 열부하에서 예상되는 수명은 0.5 및 $1.0MW/m^2$에 대해, 100,000 사이클 이상과 2,655 사이클로 계산되었으며, 시간적 제약을 고려 최종 평가는 $1.0MW/m^2$에 대해, 3,000사이클 정도의 실험을 통해 그 수명까지 접합건전성이 유지되는 지 실험을 통해 평가할 예정이다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.10
• /
• pp.1599-1605
• /
• 2005

The object of this study is to develop the method for differentiating fresh meat from frozen meat by using the measurement of the mitochondrial malate dehydrogenase in the Korean native cattle. The principle of this experiment is based on the fact that the enzyme proteins associated with mitochondrial membrane could be released by freezing. The methods of differentiating fresh meat from thawed, frozen meat were studied by measurements of mitochondrial malate dehydrogenase activity of meat press juice. Fresh and frozen beef were stored at 4, -4, -18 and -77$^{\circ}C$ for 15-day storage period. A meat press machine using air pressure was manufactured especially for these experiments, and sufficient amount of drip (about 0.15 mL/g) from 1.5 g of beef sample was efficiently obtained under a pressure of 8 kg/$cm^{2}$ generated by the meat pressing machine. The mitochondrial malate dehydrogenase activities of frozen meat drip i년ices stored at -18 and -77$^{\circ}C$ were significantly higher than those of fresh and frozen meat samples at -4$^{\circ}C$ (p < 0.05) during 10-min reaction period. However, the enzyme activities of the frozen meat drip juices (-18 and -77$^{\circ}C$) disappeared after 5 minutes of the reaction, which was not observed from the fresh and -4$^{\circ}C$ frozen meats. The enzyme activity maintained until 12 minutes for the fresh and -4$^{\circ}C$ frozen meats. From these results, the mitochondrial malate dehydrogenase could be considered as an indicator to differentiate fresh beef from frozen one.