• Journal of the Korean Wood Science and Technology
• /
• v.17 no.1
• /
• pp.3-11
• /
• 1989

This study was carried out to investigate the physical and mechanical properties. durability of adhesive bond and paint film for the basic data which were required to determine the suitability as a raw material for furniture the laminated veneer lumber (LVL) with pitch pine (Pinus rigida Mill). The results obtained were as follows; 1) The proper pressing time for making the LVL was over 45 second per milimeter of LVL thickness. 2) The bending strength of the LVL was lower than that of the solid wood but the compressive strength of the LVL was similar to that of the solid wood. The strength increased with the decrease of veneer thickness. 3) The impact bending absorbed energy of the LVL was 0 to 0.3 kg.m/$cm^2$ in the direction of parallel to the grain. The energy of the LVL was lower than that of the solid wood (0.68 kg.m/$cm^2$). 4) In warm water soaking and cold-dry tests, delamination of adhered layers surface crack, swelling, and color change were not found when the hot pressing time was over 45 second per milimeter of LVL thickness. As a result of soak under vacuum test shrinkage in the direction of parallel to the grain was about -1.0 percent and. was about 3.0 percent in the direction of the perpendicular to the grain. 6) The film cacks on the LVL's surface after the wet and cold-dry test were not found at all. 7) In the use of the LVL for interior decoration it was considered that the surface of the LVL be overlaid crossly with fancy veneers of birch and paulownia, etc. This cross overlayirg methods have resulted in few cracks on the fancy veneer.

• Korean Journal of Materials Research
• /
• v.5 no.7
• /
• pp.880-887
• /
• 1995

Melt spun YB $a_2$C $u_3$A $g_{15}$ and YbB $a_2$C $u_3$A $g_{x}$(x=5, 16 and 53) precursor alloy ribbons were oxidized at 263~322$^{\circ}C$, and heat-treated at 872~89$0^{\circ}C$ under 1.0atm oxygen pressure. In addition, about ten ribbons were stacked and coupled by pressing, and then followed the same heat treatment. YB $a_2$C $u_3$ $O_{7-{\delta}}$(1-2-3) or YbB $a_2$C $u_3$ $O_{7-{\delta}}$(1-2-3) phase was formed in both the ribbons and the multilayered specimens. The formed 1-2-3 phases were not texturized in all the ribbons, but slightly texturized in the multilayered specimens. $J_{c}$ was not achieved in all the ribbons at 77K and zero magnetic field. Among the multilayered specimens, YB $a_2$C $u_3$A $g_{15}$ and YbB $a_2$C $u_3$A $g_{16}$ showed $J_{c}$ of 260 and 180A/$\textrm{cm}^2$, respectively. YB $a_2$C $u_3$A $g_{15}$ and YbB $a_2$C $u_3$A $g_{16}$ are considered to be the appropriate compositions in producing textured superconducting oxides with improved $J_{c}$ by pressing. Onset critical temperature ( $T_{on}$ ) of the multilayered YB $a_2$C $u_3$A $g_{15}$ was 92K while those of YbB $a_2$C $u_3$A $g_{x}$(x=5 , 16 and 53) were 88~90K. , 16 and 53) were 88~90K.

• Korean Journal of Heritage: History & Science
• /
• v.48 no.4
• /
• pp.110-125
• /
• 2015

This study is objected to investigate the repairing method and the modification period of rafters via the transformation traces left in the superciliums, where repair process takes places frequently. This is the basic research of analyzing the architectural features of Deokkeori, one of the additional-rafter methods. Deokkeori method can be described as using Deokdori in the top section of Hayeon, and placement of Sangyeon above it. This method was started to be used since middle of the Joseon dynasty period(middle 18th Century) and mainly used at 19th Century to resist the transformation caused by repairing. It had been gradually developed from non-application stage to application stage including additional usage of complement. The architectural features of Deokkeori can be categorized into four. First, the usage of Deokdori to connect Sangyeon to the top section of Hayeon. It reduct the direct connection between Sangyoen and Hayeon, therefore give constructive benefits and prevent the downfall of the eaves by increasing the power which pressing the top section of Hayeon. Second, it gives the autonomy to the inside structure of ceiling by comprising it. By using Deokdori, the limit of top section's longitude was eliminated while also simplify the upper section by blocking the inside structures with ceiling. In addition, the complements occasionally seen in several buildings increase the power which pressing Hayeon. Third, the ceiling's slope has been changed to be concerned with Sangyeon, instead of Hayeon which was highly related with it before. The last factor is the thickness of rafters which used in Deokkeori. The diameter is thiner in Sangyeon than Hayeon.

• Korean Journal of Heritage: History & Science
• /
• v.40
• /
• pp.73-104
• /
• 2007

Centering around ruins recognized of being relatively early stage related to flat tile and brick, excavated in Silla capital area, the study attempted elementary approach to seek the appearance time of every remain through comparing them from the excavated cases and production methods of Short beating, Medium beating plate, Long beating plate and Stamped-roof tile. Gyeongju began to use the short beating plate made of tile-less plates or tile plate and increased its quantity. That is deemed to be due to efficiency of beating plate making methods, and moreover to be limited only for use in the palace castle and offices. That is, making short beating plates is presumed to be made merely under some definite objectives. Medium beating plate has been spread to the whole country since Silla and Baekje united. Differently from Koguryo and Baekje, Silla had its unique Beating-plates making technology available for mass-production, which was spread to the whole country and resulted in disappearing of Koguryo and Baekje technology. Long beating plate was not nearly founded in Gyeongju area, but flat tile and common tile excavated in Sachunwang Temple site and Samrang Temple 3rd remains are known. In the outskirts of Gyeongju, long beating plate appeared between the latter half of 8C and the beginning of 9C. Until now, different views have raised to appearance of long beating plate of Unified Silla, which is expected to be clarified under the situation excavated by position relations. Stamped-roof title in Gyeongju is estimated as used after the datum point year 679. While in Baekje area, five stems and branches were involved, in Silla area, code or sign was shown much. The difference between two areas would be due to each other factory, and especially the marked contents werenot letters, which means it had been changed from Baekje s existing-methods. That is, it says the production environment changed owing to Silla's merging. And stamped-roof tile was temporarily used in Gyeongju but soon disappeared, which was because Silla beating plates made under cylinder-shaped tile barrel(圓筒瓦桶) and hitting-pressing of Medium beating plate had beenspread to the whole country, so the production technology of Koguryo and Baekje was naturally dismissed. In consequence, the mergence by Silla brought about unification of each nation's special technology.

• Korean Journal of Mineralogy and Petrology
• /
• v.37 no.3
• /
• pp.87-109
• /
• 2024

Two kinds of basaltic outcrop consisting of vesicular gas-pipe and the host massive basalt were observed in the Taeheung-ri area of Namwon-eup, Jeju Island. This is clear evidence of the magmatic differentiation of lava flows after an eruption. Although the petrographic study revealed that both parts contained the same mineral phases such as olivine, clinopyroxene, and plagioclases with accessory alkaline feldspar, and titanite, their contents and compositions are more evolved in the vesicular gas-pipe. Its anorthite and wollastonite contents in plagioclase and clinopyroxene, respectively, are lower than those of the host massive basalt. The whole-rock XRF analysis indicates that vesicular gas-pipe had lower MgO content and higher CaO, Al₂O₃, P₂O₅, Fe₂O₃, Na₂O, TiO₂, SiO₂, and K₂O contents than those of the host massive basalt. Both parts of basalt are classified as tholeiite in the TAS diagram, but the former is plotted in a more differentiated area with higher SiO₂ content than the latter. Large ion lithophile elements are enriched in both types of basalt, but the enrichment is more conspicuous in the former. Rare earth elements are more abundant n porous gas-pipe than in the host massive basalt. In particualr light rare earth elements are highly enriched in both types of basalt ralative to those of chondrite, indicating typical ocean island basalts (OIBs). These findings indicate that the magma differentiation possibly occurred after an eruption, which can be explained by the gas-driven filter-pressing.

• Journal of East-West Nursing Research
• /
• v.1 no.1
• /
• pp.50-71
• /
• 1997

The intention of this study is to apprehend the con. tents and methods of herb remedies that are commonly conducted when there are health-problem cases of ENT, eyes, teeth and skin. Methods of this study are divided into two stages : 1) For a period of six months from December 1994 to June 1995, some 40 persons who are believed to be well versed with herb remedies have been randomly chosen, and we made a survey on herb remedies by symptoms: and 2) we have endeavored to make their grounds evident through the studies on literatures with the focus on the basic data collected. Their results are as follows: 1) When one feels a pain in ears, such herb remedies are employed as pouring the vapor into ears, which is made by steaming Alaska pollack, or as applying or wiping with the juices of radish or the ginkgo, or' alum. Applying the radish juice is effective for sterilization and fever removal: and applying the ginkgo juice is effective for cleanliness. But, plastering alum, sesame oil or castor oil, or pouring the vapor of Alaska pollack into ears are perhaps effective but do not have any pharmacologic grounds. 2) When one bleeds at the nose, such kinds of herb remedies are applied as stimulating nose or head with cold water, pressing nose or ridge of nose, or filling up nares with mashed mugworts. In addition, they have utilized garlic or leeks. Such methods as stimulating with cold water or just pressing nose and ridge of nose is based on reasonable grounds, i.e. vasoconstriction and vascular compression ; and applying mashed garlic on the sole of foot is good for the circulation of Qui ; and the use of mugworts and leeks is based upon the pharmacological function of hemostasis. 3) When one feels a sore throat such kinds of herb remedies are employed as gargling or rinsing throat with brine, drinking hot gruel or water, or drinking the juice of mugwort, radish, ginger or Chinese quince. Gargling with brine or drinking the juice of mugwort, radish or ginger is based upon the pharmacological function of pain alleviation, fever removal, and detoxication. 4) When a boil is formed in mouth, such herb remedies are applied as spreading honey, brine or alum water, and taking gall nut, Chinese matrimony vine, lotus root, etc, for drugs. Spreading honey, brine or water that is made by infusing gallnut, Chinese matrimony vine, lotus root is based upon such functions as hematosis, astriction, antibacterial, and antiphlogistic, Alum, eggplant and licorice are said to be effective, but their pharmacological effects have no grounds. 5) When one has conjunctivitis such herb remedies are commonly applied as irrigation with brine and dropping breast milk in eyes. Moreover, such other drugs are used as plantain. shepherd's purse, and purslane, etc. The use of brine, breast milk, plantain, shepherd's purse and purslane is based upon such functions as sterilization, antiphlogistic, disinfection and pain relieving. Eriocaulon sieboldianum, bean stem, bean pod and narcissus leaves are said to be effective, but their pharmacological action have no basis. When one has a stye, such herb remedies are applied as extracting eyelashes, stimulating by a massage of middle finger, third finger or big toe, as well as sear ing with a heated bamboo comb that is fine-toothed. Other than these, plantain and nightshade's nuts are used as drugs for it. Extracting eyelashes corresponds with exclusing suppurative node and draining the stye of pus ; and the use of plantain is based upon disinfection: and nightshade's nuts are said to be effective, however, their pharmacological action has no grounds. 6) For a treatment of toothache, such herb remedies are commonly employed as rinsing mouth with brine and holding cold water or gasoline in the mouth ; and as the drugs that are believed to be effective have been Welsh onion, ginger and castor-oil, plant, etc. The use of Welsh onion is based upon pain killing, antiinflammatory actions, and the use of ginger is based upon detoxication and disinfection ; and seeds of castor-oil plants are said to be effective, but they have no pharmacological basis. 7) When one has hives, such herb remedies are commonly applied as rubbing burned straw in affected parts, exposing to its smoke, rubbing with salt, sweeping down with a broom, and spreading and drinking boiled water of trifoliate orange. The use of cassia tora seeds, walnut, aloe and radish is said to be effective. The use of cassia tor a seeds has the functions of intestinal order, anti-paralysis, etc. The use of walnut has resulted in an increase of blood by invigorating spirits ; and the use of aloe is based upon disinfection, antibiotic, anti-salt, antihistamine and detoxication action. But, the effects of radish juice and straw's smoke have no pharmacological grounds. 8) When one gets a boil, such herb remedies are commonly used as applying a plaster, paste of flour mixed with yolk, soy sauce or honey, as well as spreading pounded elm tree. Other remedies that have been said to be effective are ; heating with mugwort, brine, wild rocambole, aloe, onion, squid's bone, etc. The use of mugwort is based upon pain killing, astringent antiinflammatory and tranquility. Wild rocambole is based upon the generation and maintenance functions of cell-joining textures ; elm tree upon antiphlogistic ; aloe upon fever removal and antiphlogistic ; onion on pain killing, fever removal, antiphlogistic and tranquility ; squid's bone on astriction: and brine or vinegar on sterilization. Pine resin and gardenia seed are said to be effective, but they have no pharmacological basis. 9) When one cuts his skin, such herb remedies are commonly employed as spreading mugwort's juice or squid's bone powder, or pressing the wounds. In addition, kalopanax, onion and fine soil are employed. The use of mugwort, kalopanax and squid's bone is based upon such functions as hemostasis, sedation, pain killing, antibacterial ; and fine soil is said to be effective, but it has no pharmacological basis. 10) When one suffers from whitlow, such herb remedies are commonly utilized as heating with boiled soy sauce, spreading soybean paste, or dipping into eggs, etc. Other drugs that have been employed are onion root, brine, eggplant, potato, loach, etc. The use of onion is based upon pain killing and antiphlogistic functions ; and that of brine upon antiphlogistic function. The use of soy sauce or soybean paste, fomentation, eggplant, potato and loach is said to be effective, but it has no pharmacblogic ground. 11) For the treatment of frostbite, such herb remedies are commonly used as dipping the affected part into frozen soybean sack, using boiled water of eggplant stem, garlic caulis, onion, hot pepper, caulis. Onion is based upon antiphlogistic and tranquility actions garlic upon disintection, metabolic exacerbation, tonic and aphrodisiac actions and the use of eggplant and hot pepper is based upon help blood circulation, dissolution and excretion of waste matters in vein. 12) For the treatment of burn, such herb remedies or drugs are commonly used as cleansing with Korean gin, spreading eggs, cleansing with cold water and soap water ; and as brine, cactus, moss, soybean paste, oil, etc. The cleansing with Korean gin, cold water, soap water, brine, vinegar is based upon cleaning and sterilizing functions ; and the use of cucumber is based upon nu. trition provision, and strengthening of resisting power by adjustment of metabolism. The use of potato, cactus, moss, oil and eggs is said to be effective, but their phamacological functions are not clarified. In view of the above results, we can realize that the drugs that have been employed in herb remedies are quite diverse. However, in regard to majority of herb remedies that have been employed by symptoms, the pharmacological functions of their drugs have not been clarified, and they are merely known as effective. Furthermore, they have not been recorded in the literature as yet ; and we confirm that there have been many herb remedies that were executed without the proper knowlege of their effects. It is now our view that the results of this survey may be utilized for consulting data in regard to the use of herb remedies.

• Journal of Korean Society of Forest Science
• /
• v.30 no.1
• /
• pp.19-29
• /
• 1976

The fiberboard and paper mills in this country are much affected by the price hikes and shortage of phenolic resins, since phenolic acid as a raw material depends on imported good. It is prerequisite to fiberboard industry to help replace with other sized and stabilize the prices and supply of them, improving the quality of boards. Thus, the present study was carried out to examine the effect of strength increasing sized such as urea formaldehyde resin (anion and cation type) and urea melamine copolymer resin, on the quality of the wet forming hardboard, and comparing them with two types of proprietary modified melamine resins, and ordinary size, phenol resin. The Asplund pulp was prepared from wood wastes mixed with 20 percent of lauan and 80 percent of pines as a fibrous material. After sizing agents were added at a pH of 4.5 for 10 minutes with alum in the beater, the stock was made in the form of wet sheet, prepared, and then performed by hot pressing cycle: $180^{\circ}C$, $50-6-5kg/cm^2$, 1-2-7 minutes. The properties of hardboard were examined after air conditioning. The results obtained are summarized as follows: 1. There is a significant difference in specific gravity among hardboards that were treated with strength increasing resins, but no difference is effected by the increase in the resin content. In the case of modified melamine resin, its specific gravity is highest. The middle group comprises cation type of urea resin, anion type of urea resin, and acid colloid of urea-melamine copolymer resin. The lowest is phenolic resin. 2. The difference of the moisture content of hardboard both by the resins and by the amount of each resin applied is significant. The moisture content of hardboard becomes lower along with the increase of each resin content, but there is no difference between 2 and 3 percent. 3. For water absorption, there is a significant difference both in the adhesives used and in the amount of paraffin wax emulsion. The water resistance becomes higher inn proportion to the content of the paraffin wax emulsion. To satisfy KS F standards of the water resistance, a proprietary modified melamine resin (p-6100) and modified cation type of urea resin (p-1500) do not require any paraffin wax emulsion, but in the case of anion type of urea resin, cation type of urea resin, and urea-melamine copolymer resin, 1 percent of paraffin wax emulsion is needed, and 2 percent of paraffin wax emulsion in the case of phenolic resin. 4. The difference of flexural strength of hardboard both by the resins and by the amount of each resin is significant. Modified melamine resin shows the highest degree of flexural strength. Among the middle group are urea-melamine copolymer resin, p-1500, anion type of urea resin, and cation type of urea resin. Phenolic resin is the lowest. The cause may be attributable to factors combined with the pressing temperature, sizing effect, and thermal efficiency of press platens heated electrically. 5. Considering the economic advantages and properties of hardboard, it is proposed that urea-melamine copolymer resin and cation type of urea resin be used for the development of the fiberboard industry. It is desirable to further develop the modified urea-melamine copolymer resin and cation type of urea resin through continuous study.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.2
• /
• pp.38-45
• /
• 1999

This study was to figure out proper Formaldehyde/Urea molar ratio of UF resin with satisfactory bonding strength of plywood and properties of particleboard. The six kinds of UF resins were manufactured with F/U molar ratio 1.0, 1.2, 1.4, 1.6, 1.8, and 2.0. The boards were made of three kinds of raw materials : Veneer, Sliver-Particle and Strand-Particle. Manufacturing condition of plywood : amount of mixing resin was 150g/$m^2$. The fourty secs/mm simple-pressing schedule in the pressure 10kgf/$m^2$ was applied for 480mm${\times}$700mm board at the temperature of $110^{\circ}C$ in a hot press. Manufacturing condition of particleboard : Target density was 0.65g/$cm^2$. The stepwise 9 minutes- multi-pressing schedule in the maximum pressure 40kgf/$cm^2$, the minimum pressure 15kgf/$cm^2$ was applied for $480mm{\times}634mm{\times}12mm$ board at the temperature of $150^{\circ}C$ in a hot press. The results are as follows : I. In bonding strength, plywood which was made by F/U molar ratio 1.2 showed the highest value. Other molar ratio resin also gave the satisfied value of KS standard, 7.5kgf/$cm^2$. 2. In internal bond strength of particleboard, Sliver-Particleboard(SLPB) and Strand-Particleboard(STPB) varied respectively from 5.9kgf/$cm^2$ to 4.8kgf/$cm^2$, from 6.7kgf/$cm^2$ to 5.4kgf/$cm^2$. SLPB with F/U=1.2 and STPB with F/U=1.6 had higher IB value. Also, both SLPB and STPB showed lower IB value in F/U molar ratio 2.0 and 1.0. 3. SLPB and STPB with six kinds of UF resin respectively satisfied bending strength of KS standard 150 Type(130kgf/$cm^2$) and 200 Type(180kgf/$cm^2$). Bending strength data for both of SLPB and STPB showed little or no loss from F/U=1.8 to F/U=1.2. Also, STPB was approximately two times higher than that of SLPB. Therefore, the raw material's shape had more effect on bending strength than the FlU molar ratio. 4. F/U=1.6 and 1.4 showed the lower thickness swelling in SLPB and STPB. All of STPBs satisfied thickness swelling of KS standard, under 12%.

• The Korean Journal of Food And Nutrition
• /
• v.21 no.4
• /
• pp.477-484
• /
• 2008

The Pacific saury, Cololabis saira Kwamaegi, is a traditional local food of the Eastern sea area, centered around Pohang. It is well-recognized as being both tasty and nutritious. Nevertheless, bacterial contamination, excessive dryness, and compositional changes render this fish edible only during the winter months. Thus, to improve its storage capabilities, this study assessed the effects of storage material, type, temperature, and duration on compositional changes in Kwamaegi. The assessed samples were Kwamaegi which had been naturally dried for 15 days. The storage materials included an A-film, a self- developed multi-film made of polyethylene, polyamide, EVOH, and polyethylene, and a B-film made of polyethylene, nylon, polyethylene, nylon, and polyethylene. The B films were utilized after pressing and lamination. The storage types included one whole fish(1G), or 2 divided fish(2G), to increase eating convenience. The 2G type was the muscle portion divided vertically after discarding the jowl, skin, and internal organs. The storage temperatures were 0, -15 and $-30^{\circ}C$, and the storage durations were 2, 4, and 6 months. Among the lipid rancidities, acid value and peroxide value showed the highest level of initial rancidity at a storage temperature of $0^{\circ}C$ for 2 months. We noted no significant differences between storage materials. The lower the storage temperatures, the less acid and peroxide were generated. Between the storage types, 1G evidenced lower less acid values than 2G. The TBA values revealed a dramatic increase at a storage temperature of $0^{\circ}C$ for 2 months, whereas this rapid progress was not observed at storage temperatures of -15 and $-30^{\circ}C$. Along with the acid value and peroxide value, the samples stored at 0, -15 and $-30^{\circ}C$ evidenced significantly lower TBA values. The B-film evidenced a slightly lower TBA value than was observed in the A-film, but no significant differences were observed.

• Applied Chemistry for Engineering
• /
• v.20 no.3
• /
• pp.317-321
• /
• 2009

In order to analyze the high temperature phase formation and the sinterability of super ionic conductor $K^+-{\beta}/{\beta}"-Al_2O_3$ which is commonly used as a solid oxide electrolyte, the pure $K^+-{\beta}/{\beta}"-Al_2O_3$ powder in the ternary system $K_2O-LiO_2-Al_2O_3$ was synthesized by solid state reaction and formed to tube and disk using slip casting method and cold isostatic pressing (CIP), respectively. The slip casting was conducted in an alumina mold with the slurry containing 40 wt% of solid contents and the CIP was carried out under 20 MPa. The samples were sintered at $1600^{\circ}C$, $1700^{\circ}C$ and $1750^{\circ}C$, respectively, and their phase formation and the sintering density were investigated according to the forming method. The samples produced by CIP showed far higher ${\beta}"-Al_2O_3$ fraction as compared with those by slip casting. On the other hand, the samples by slip casting showed slightly higher sintering density. The relative density reached to about 83% at $1750^{\circ}C$ and for 1 h, independent of the forming method. In the case of 90 min socking time, the density was decreased owing to the exaggerated grain growth and the pores by $K_2O$ evaporation.