• 한국염색가공학회지
• /
• 제5권3호
• /
• pp.188-193
• /
• 1993

Aqueous polyurethanes(APU) were prepared from polypropylene glycol(PPG), dimethylol propionic acid(DMPA), and isophoron diisocyanate(IPDI) following a prepolymer mixing process. APUs were applied as binder for nonwoven fabrics processing. APU treated nonwoven fabrics generally showed better tear and tensile strength as compared with the untreated ones. In addition, depending on the soft segment length and crosslinking density of the PU, tear strength of APU treated fabrics was favorably compared with solvent type treated one. Similar results were obtained with microfiber nonwoven fabrics, however, the effect was less significant.

• 한국산업융합학회 논문집
• /
• 제6권1호
• /
• pp.17-21
• /
• 2003

5원환 고리아세탈 화합물인 4-methylenes(4,5)을 합성하고 저온조건 하에서 중합반응을 조사한 결과, 선택적인 개환중합이 일어났다. 보통의 양이온 개시제를 사용한 결과 $-78^{\circ}C$에서 가교체가 얻어졌으며, $CH_3SO_3H$를 개시제로 사용하면 같은 조건에서도 주사슬과 곁사슬에 이중결합을 가지는 개환중합체가 얻어진다. 이 중합체는 반응성을 가지는 불포화기를 포함하고 있으므로 prepolymer로써 널리 사용될 수 있다.

• 전기학회논문지
• /
• 제57권10호
• /
• pp.1841-1846
• /
• 2008

In this paper, we present the fabrication of microlens by electrohydrodynamic atomization(EHDA) of PDMS prepolymer. The diameter and contact angle of PDMS microlens can be altered by changing the applied voltage and substrate temperature at the experimental setup. It is considered that PDMS microlens can be integrated into the Lab-on-a-chip directly without any photolithographic process by EHDA. The property of PDMS microlens is confirmed by transmitting and measuring the Gaussian beam through microlens.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.611-614
• /
• 2003

We have investigated electric field effect on the formation of phase separated composite organic film structure which is utilized by anisotropic phase separation from LC and prepolymer mixtures. Application of bias field resulted in a significant change in liquid crystal alignment between glass substrate and polymer layer. The liquid crystal molecules segregated into the inter-electrodes and formed twisted structure which is the result of imprinting of LC alignment by the bias field on polymer layers during polymerization process.

• 한국염색가공학회지
• /
• 제8권5호
• /
• pp.76-83
• /
• 1996

Fragrant microcapsules were prepared by in situ polymerization using urea-formaldehyde prepolymer. Lemon oil and migrin oil as susceptible materials were used. The diameter and distribution of the microcapsule were controlled by several factors, such as wall material, core material content, emulsion agent and stirring speed, respectively. Susceptible cotton fabrics with fragrant release functionality were successfully produced by using microcapsule containing fragrant materials.

• Elastomers and Composites
• /
• 제54권2호
• /
• pp.128-134
• /
• 2019

Many scientific approaches have been developed for the preparation of alternative crosslinker system of amino resins and isocyanate prepolymers. Herein, copolymerization of trimethoxy silane with N-butoxymethyl acrylamide was performed, and the product was reacted with hydroxyl groups in the alkyl main chain without the need for an additional crosslinker. For the crosslinker synthesized herein, the molecular weight, glass transition temperature, and viscosity increased with increasing content of N-butoxymethyl acrylamide.

• Fibers and Polymers
• /
• 제2권3호
• /
• pp.122-128
• /
• 2001

UV-curable polyurethane acrylate prepolymers were prepared from diisocyanates [isophorone diisocyanate (IPDI), 2,4-toluene diisocyanate (TDI), or 4,4'-dicyclohexylmethane diisocyanate (H$_{12}$MDI)], diols [ethylene glycol (EG), 1,4-butane diol (BD), or 1,6-hexane diol (HD)], polypropylene glycol as a polyol. UY-curable mixtures were formulated from the prepolymer (90 wt%), reactive diluent monomer trimethylol propane triacrylate (10 wt%). and photoinitiator 1-hydroxycy-clohexyl ketone (3 wt% based on prepolymer/diluent). The effects of different diisocyanates/low molecular weigh dial on the dynamic mechanical thermal properties and elastic recovery of UV-cured polyurethane acrylate films were examined. The tensile storage modulus increased a little in the order of EG > BD > HD at the same diisocyanate. Two loss modulus peaks for all samples are observed owing to the glads transition of softs segments ($T_gh$) and the glass transition temperature of hard segments ($T_gh$). For the same diisocyanate, $T_gh$, decreased, however, $T_gh$ increased, in the order of HD > BD > EG. The elastic recovery also increased in the order of HD > BD > EG at the same diisocyanate. In case of same diols, $T_gh$ increased in the order of $H_12$MDl > TDI > IPDI significantly. The ultimate elongation and elastic recovery increased in the order of TDI > IPDI > $H_12$MDl at the same diol.l.

• Korean Chemical Engineering Research
• /
• 제50권4호
• /
• pp.614-620
• /
• 2012

Poly (carbonate diol), isophrone diisocyanate와 dimethylol propionic acid로부터 제조된 폴리우레탄 prepolymer의 말단 NCO 기를 aniline으로 capping시켜 aniline terminated waterborne polyurethane dispersion (ATPUD)을 합성하였다. 이 ATPUD와 순수한 waterborne polyurethane dispersion (PUD)을 각각 전도성 고분자인 polystyrene sulfonate로 도핑된 poly (3,4-ethylenedioxythiophene)[PEDOT/PSS]과 블렌딩시켜 대전방지용 코팅 용액을 제조한 후, 이것을 polycarbonate 기재 위에 도포하여 코팅 도막을 형성하였다. PEDOT/PSS가 2.5 g 이하로 적당량 첨가된 경우에는 ATPUD로 제조된 코팅 도막의 표면저항 값은 $1.0{\times}10^{11}{\sim}2.5{\times}10^8{\Omega/cm^2$로 순수한 PUD로부터 제조된 코팅 도막의 $5.0{\times}10^{11}{\sim}6.3{\times}10^9{\Omega}/cm^2$ 보다 우수한 전기전도도를 나타내었다. 그러나 PEDOT/PSS가 3.0 g으로 과량 첨가된 경우에는 ATPUD로부터 제조된 코팅 도막과 PUD로부터 제조된 코팅 도막은 비슷한 전기전도도를 나타내었다.

• Korean Chemical Engineering Research
• /
• 제49권3호
• /
• pp.285-291
• /
• 2011

Isophorone diisocyanate(IPDI), poly(tetramethylene glycol)(PTMG), dimethylol propionic acid(DMPA)를 출발물질로하여 NCO terminated prepolymer가 합성되었다. 이 prepolymer의 NCO기를 실란으로 capping하기 위해 다양한 실란커플링제인 methyltrimethoxysilane(MTMS), glycidoxypropyl trimethoxysilane(GPTMS), methacryloxypropyl trimethoxysilane(MPTMS), aminopropyl triethoxysilane(APS)이 첨가되었다. 제조된 용액의 평균 입경은 실란커플링제가 첨가되면서 증가하였다. 또한 실란커플링제인 GPTMS, MPTMS, APS의 첨가는 코팅 막의 연필경도를 향상시킬 수 있었으나, MTMS의 첨가는 코팅 막의 연필경도를 향상시킬 수 없었다.

• Korean Chemical Engineering Research
• /
• 제49권5호
• /
• pp.548-553
• /
• 2011

Isophorone diisocyanate(IPDI), polycarbonate diol(PCD), dimethylol propionic acid(DMPA)를 출발물질로 하여 NCO terminated prepolymer가 합성되었다. 이 prepolymer의 NCO기를 아크릴 단량체로 capping하기 위해 다양한 아크릴 단량체인 2-hydroxyethyl methacrylate(HEMA), 2-hydroxyethyl acrylate(HEA), pentaerythritol triacrylate(PETA)가 첨가되었다. 제조된 용액의 평균 입경은 아크릴 단량체가 첨가되면서 증가하였다. 또한 제조된 코팅 막의 연필경도 및 내마모성은 순수한 수분산 폴리우레탄보다 우수하였으며, 아크릴 단량체 중에서 PETA가 가장 우수한 물성을 보였다.