The vibrational characteristics of a radial-ply (155SR13 4PR) and a biased-ply tire (6.15-134PR) were investigated for examining the effects of tires with different structure on the ride characteristics of the vehicle. The natural frequencies at the tread band, mode shapes, and damping factors of two tires at the state of plane vibration were determined experimentally. The test work was performed at four levels of the inflation pressure, ranging from 171.7 kPa to 245.2 kPa, and three levels of the vertical load, deviating by 10% from the standard load designated by the Department of Transportation of the United States of America. The following results were drawn by the analysis of the test results: 1. The first-order natural frequencies of the radial-ply and the biased-ply tires at the tread band were 112 Hz and 159 Hz, respectively, at the state o f the free vibration when the inflation pressure of 196.2 kPa was applied. It was known that the biased-ply tire has higher resonant frequency than the radial-ply tire and the natural frequencies of the both tires move to the high frequency range as t he inflation pressure is increased. 2. The vibration modes of both tires were quite different. No big difference in mode shapes was examined as the inflation pressure was increased. But the natural frequencies of two tires were changed. For the radial-ply tire, no difference in mode shape was found whether the vertical load was applied or not. But a significant difference in mode shape was examined for the biased-ply tire. 3. Any difference was not found in damping factor as the different inflation pressures were applied. 4. When no vertical load was applied, damping factors of the radial-ply and biased-ply tire at the state of the natural vibration ranged from 2.6 to 5.9%, and from 4.1 to 7.8%, respectively. It was estimated that the radial-ply tire would have better cushioning than the biased-ply tire since the vertical spring rate of the radial-ply tire was much less than that of the biased-ply tire, even though the damping effect of the radial-ply tire was smaller than that of the biased-ply tire.
란탄족 원소 분석에서 란탄족 원소 상호간의 간섭영향에서 오는 방해영향을 제거하고 정확한 분석 결과를 얻기 위해 란탄족 원소들을 이온크로마토그래피로 분리하였다. 분리된 란탄족 원소들은 PAR(4-(2-pyridylazo)-resorcinol monosodium salt)과의 포스트컬럼 착색반응을 통하여 발색한 후, UV/VIS 흡광광도법으로 520nm의 파장에서 흡광도를 측정하여 란탄족 원소들을 분석하였다. 이때 용리액은 Pyromellitic acid였고 분리순서는 Sm, Eu, Gd, Y, Tb, Dy, Ho, Er, Tm, Yb, Lu였고, La, Ce, Pr, Nd는 pyromellitic acid로 분리되지 않으므로 옥산살을 사용하여 분리 분석하였다. Pyromellitic acid의 pH 2.99에서 중란탄족 원소들이 가장 잘 분리되었다.
Preparative conditions and characteristics of six-vegetable and fruit juice were studied for the effects of mixing ratio, heat treatment and addition of sugar, salt and organic acid. The vegetables and fruit used were carrot(Ct), cabbage(Cg), pear(Pr), cucumber(Cr), celery(Cy) and dongchimi(Di). From the sensory results of mixing ratio of three of binary mixtures of Cg-Pr(1:3):Ct-Di(1:4):Cr-Cy(3:1), two ratios of 5.0:2.5:2.5(V-6A) and 6.0:2.0:2.0(V-6B) were suggested optimal for six-vegetable and fruit juice. Addition of 2% sucrose and 0.3% NaCl improved the preference significantly. The pH 4.0 for V-6A and pH 3.5 for V-6B were more prefered when pH was adjusted by citric acid. Heating the juice at $100^{\circ}C$ for 100 minutes slightly decreased pH and increased the acidity. Total solids and viscosity were also decreased by heating. All of those changes were more significant in V-6B than V-6A, probably due to lower pH. Heating the juice resulted in a slight decrease in L value and an increase in a and b values. Heating at $100^{\circ}C$ caused an increase in moldy flavor and a decrease in fresh vegetable flavor while heating at $80^{\circ}C$ for 20 minutes changed them little.
JSTS:Journal of Semiconductor Technology and Science
/
제4권2호
/
pp.100-105
/
2004
The influencing factors on the OPC (optical proximity correction) results are quantitatively analyzed using OPCed L/S patterns. ${\sigma}$ values of proximity variations are measured to be 9.3 nm and 15.2 nm for PR-A and PR-B, respectively. The effect of post exposure bake condition is assessed. 16.2 nm and 13.8 nm of variations are observed. Proximity variations of 11.6 nm and 15.2 nm are measured by changing the illumination condition. In order not to seriously deteriorate the OPC, these factors should be fixed after the OPC rules are extracted. Proximity variations of 11.4, 13.9, and 15.2 nm are observed for the mask mean-to-targets of 0, 2 and 4 nm, respectively. The decrease the OPC grid size from 1 nm to 0.5 nm enhances the correction resolution and the OCV is reduced from 14.6 nm to 11.4 nm. The enhancement amount of proximity variations are 9.2 nm corresponding to 39% improvement. The critical dimension (CD) uniformity improvement for adopting the small grid size is confirmed by measuring the CD uniformity on real SRAM pattern. CD uniformities are measured 9.9 nm and 8.7 nm for grid size of 1 nm and 0.5 nm, respectively. 22% improvement of the CD uniformity is achieved. The decrease of OPC grid size is shown to improve not only the proximity correction, but also the uniformity.
$Al(O-i-Pr)_3$을 촉매로 이용하고 중합 개시제로 glycidol을 사용하여 L-lactide를 개환중합하여 glycidol-poly(lactide)(Gly-PLA)를 얻었다. $^1H$ NMR 분석 결과 glycidol의 말단에 존재하는 수산기가 Gly-PLA에는 존재하지 않았고 이를 통해 glycidol의 말단에 존재하는 OH기가 개시제의 역할을 하여 중합이 진행되었음을 확인하였다. Llactide용액중합과 벌크중합을 진행하였으며, L-lactide/glycidol 몰비, 중합 온도와 시간에 따라 생성된 Gly-PLA의 분자특성을 관찰하였다. L-lactide/glycidol 몰비가 증가할수록 수율과 분자량은 증가하였다. 또한 L-lactide/glycidol 몰비가 증가할수록 저분자량에 해당하는 낮은 녹는점 피크는 줄어들고, 고분자량에 해당하는 높은 녹는점 피크가 증가하였다.
Ferroelectric properties of{{{{ { { { {SrBi }_{2 }Ta }_{2-x }Nb }_{x }O }_{9 } }} (SBIN) thin films were affected by the amount of Bi content in SBTN. The addition of Bi into the SBTN films could be accomplished by heat treating SBTN/Bi2O3/SBTN het-erostructures fabricated by r.f. magnetron sputtering method. The variation of Bi content was controlled by changing the thickness of the sandwiched Bi2O3 in SBTN/Bi2O3/SBTN heterostructure from 50 to 400$\AA$. As changing the thickness of the sandwiched Bi2O3 in Bi2O3 films was increased from 0 to 100$\AA$ the grain grew faster and the ferroelectric pro-perties were improved. On the other hand when the thickness of Bi2O3 films was thicker than 150$\AA$ the fer-roelectric properties were deteriorated Especially for SBTN thin films inserted by 400$\AA$ Bi2O3 layer a Bi2Phase appeared as a second phase resulting in poor ferroelectric properties. The maximum remanent po-larization (2Pr) and coercive field(Ec) were obtained for the SBTN/Bi2O3/(100$\AA$)/SBTN thin films. In this case 2Pr and Ec were 14.75 $\mu$C/cm2 and 53.4kV/cm at an applied voltage of 3V respectively.
Ferroelectric lanthanides-substituted $Bi_4Ti_3O_{12}$$(Bi_{4-x}Ln_xTi_3O_{12}, BLnT)$ thin films approximately 200 nm in thickness were deposited by metal organic chemical vapor deposition onto Pt(111)/Ti/SiO$_2$/Si(100) substrates. Many researchers reported that the lanthanides substitution for Bi in the pseudo-perovskite layer caused the distortion of TiO$_6$ octahedron in the a-b plane accompanied with a shift of the octahedron along the a-axis. In this study, the effect of lanthanides (Ln=Pr, Eu, Gd, Dy)-substitution and crystallization temperature on their ferroelectric properties of bismuth titanate $(Bi_4Ti_3O_{12}, BIT)$ thin films were investigated. As BLnT thin films were substituted to lanthanide elements (Pr, Eu, Gd, Dy) with a smaller ionic radius, the remnant polarization (2P$_r$) values had a tendency to increase and made an exception of the Eu-substituted case because $Bi_{4-x}Eu_xTi_3O_{12}$ (BET) thin films had the smaller grain sizes than the others. In this study, we confirmed that better ferroelectric properties can be expected for films composed of larger grains in bismuth layered peroskite materials. The crystallinity of the thin films was improved and the average grain size increased as the crystallization temperature,increased from 600 to 720$^{\circ}C$. Moreover, the BLnT thin film capacitor is characterized by well-saturated polarization-electric field (P-E) curves with an increase in annealing temperature. The BLnT thin films exhibited no significant degradation of switching charge for at least up to $1.0\times10^{11}$ switching cycles at a frequency of 1 MHz. From these results, we can suggest that the BLnT thin films are the suitable dielectric materials for ferroelectric random access memory applications.
n-propanol 용매내에서 titanium n-propoxide($Ti(O^nPr)_4$)의 가수분해반응에 의하여 $TiO_2$ 미분말을 합성하였고, 가수분해속도를 자외선 분광법에 의하여 측정하였다. 분말합성은 water/alkoxide의 농도비가 약 300정도에서 실시하였으며, 물농도, 반응온도, 반응시간 및 반응용액의 산 염기효과에 의한 합성조건을 조사하였다. 반응은 $Ti(O^nPr)_4$의 농도에 비하여 물농도를 과량으로 하여 유사일차반응으로 진행시켰고, 반응속도상수를 Guggenheim method로 계산하였다. 또한 물의 동위원소효과($D_2O$)를 측정하여 반응에 관여하는 물분자의 촉매성을 확인하였다. 실험결과 중성 및 염기성 용액 조건에서 $TiO_2$미분말이 합성되었고, 미세구조 관찰로부터 $TiO_2$입자는 직경 $0.4-0.7{\mu}m$ 정도의 구형입자로 확인되었으며, 물의 농도와 반응온도가 증가할수록, 반응시간이 감소할수록 입자크기는 작아지는 경향을 보였다. 물의 동위원소효과로부터, 물분자는 nucleophilic catalysis로 작용하고 있으며, 반응속도로부터 전이상태에 참여하는 n-value와 열역학적 파라미터를 계산한 결과, $Ti(O^nPr)_4$의 가수분해반응은 이분자 반응인 associative $S_N2$ mechanism으로 진행하는 것으로 추정되었다.
Purpose : Despite a development of therapeutic machines and advance in modern radiation therapy techniques, locally advanced cervical carcinoma has shown high rate of local failure and poor survival rate, Combination of chemotherapy and radiotherapy demonstrated benefit in improving local control and possibly the overall survival. Our study was performed to evaluate effect of concurrent chemoradiation on locally advanced uterine cervical cancer. Methods and Materials : Twenty six patients with locally advanced stage(FIGO stage IIB with ${\geq}5cm$ in diameter, III, IVA) were treated with combination of radiation therapy and concurrent cisplatinum between May of 1988 and September of 1993 at our hospital. Radiation therapy consisted of external irradiaton and 1-2 sessions of intracavitary irradiation. Cisplatinum was administered in bolus injection of 25mg/$m^2$ at weekly intervals during the course of external radiation therapy. Results : Of the 26 Patients, twenty-five patients were evaluable for estimation of response. Median follow-up period was 25 months with ranges from 3 to 73 months. Stage IIB, III, and IVA were 16, 5, 4 patients, respectively, Twenty patients were squamous cell carcinoma. Response was noted in all 25 patients: complete response(CR) in 17/25($68\%$), Partial response(PR) in 8/25($32\%$). Of the 24 patients except one who died of sepsis at 3 months follow-up, seventeen patients($70.8\%$) maintained local control in the pelvis: 16/17($94.1\%$) in CR, 1/17($14.3\%$) in PR. Fourteen of the 17 patients with CR are alive disease free on the completion of follow-up. Median survival is 28 months for CR and 15 months for PR. Analysis of 5-year survival by stage shows 11/16($59.8\%$) in IIB, 3/5($60.0\%$) in III, and 1/4($25.0\%$) in IVA. Overall 5-year survival rate was $55.2\%$. Ten patients recurred: 4 at locoregional, 3 in distant metastasis and 3 with locoregional and distant site. Toxicity by addition of cisplatinum was not excessive. Conclusion : Although the result of this study was obtained from small number of patients, it is rather encouraging in view of markedly improved response rate compared with the results of historical group.
다양한 종류의 메탈로센 촉매와 공촉매인 개질-MAO (MMAO)을 이용한 에틸렌 (E)과 노르보르넨 (N)의 공중합에서 중합조건이 촉매 활성 및 공중합체의 구조와 성질 등에 미치는 영향을 조사하였다. 즉 $C_2$-대칭구조를 가지는 rac-Et(Ind)$_2$ZrC $l_2$, $M_2$Si(Ind)$_2$ZrC $l_2$, M $e_2$Si-(Cp)$_2$ZrC $l_2$ 및 $C_{s}$-대칭구조를 가지는 iPr(FluCp)ZrC $l_2$, 그리고 constrained geometry catalyst (CGC)와 이중다리 (di-bridged) 지르코노센 둥의 다양한 메탈로센 촉매를 사용하여 [N]/[E] 공급비에 따른 촉매 활성, 공중합체 (COC)의 열적 성질 및 N 함량을 조사하였다. rac-Et(Ind)$_2$ZrC $l_2$를 촉매로 사용한 경우에 공촉매의 몰비, 중합 온도 및 공촉매 종류 등의 중합조건을 조사한 결과 [Al]/[Zr]=3000, 4$0^{\circ}C$, MMAO 공촉매 등이 적합하였다. [N]/[E] 공급비가 증가됨에 따라 COC내의 N 함량이 증가하는 일반적인 경향을 보였으나, 촉매 활성은 사용된 메탈로센 촉매의 구조에 따라 달랐다. 즉 [N]/[E]가 증가할수록 $C_2$-대칭구조의 촉매 활성은 감소하였으나 $C_{s}$-대칭구조의 경우에는 증가하였다. 촉매활성과 N함량 등을 고려해 보면 rac-Et(Ind)$_2$ZrC $l_2$/MMAO계에서 비교적 높은 촉매 활성과 COC의 $T_{g}$제어가 용이한 결과를 얻을 수 있었다. 촉매종류에 따른 단량체의 반응성비를 Helen-Tudos 방법으로 구하였다.하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.