• Transactions on Electrical and Electronic Materials
• /
• 제16권3호
• /
• pp.162-167
• /
• 2015

To investigate the effect of fluoro groups substitution on poly(p-phenylenevinylene) derivatives, poly(2,3,5,6- tetrafluoro-p-phenylenevinylene-alt-N-ethylhexyl-3,6-carbazolevinylene), PCTF-PPV, and poly[2,3,5,6-tetrafluoro-p-phenylenevinylene-alt-2-methoxy-5-(2-ethylhexyloxy)-p-phenylenevinylene], PMTF-PPV, were synthesized by the well-known Wittig condensation polymerization process. To compare the influences of fluoro groups, no fluoro groups containing model polymers, poly(p-phenylenevinylene-alt-N-ethylhexyl-3,6-carbazolevinylene), PCPPPV and poly[p-phenylenevinylene-alt-2-methoxy-5-(2-ethylhexyloxy)-p-phenylenevinylene], p-PMEH-PPV, were also synthesized. The resulting polymers were completely soluble in common organic solvents and exhibited good thermal stability up to 300℃. The polymers showed UV-visible absorbance and photoluminescence (PL) in the ranges of 259~452 nm and 500~580 nm, respectively. The tetrafluorophenyl containing PCTF-PPV and PMTF-PPV showed relatively red-shifted PL peaks at 521 nm and 580 nm, respectively, compared to that of non-fluoro groups containing polymers (PCP-PPV: 500 nm and p-PMEH-PPV: 539 nm). The single-layer light-emitting diode was fabricated in a configuration of ITO/polymer/Al. Electroluminescene (EL) emissions of PCP-PPV, PCTF-PPV, p-PMEH-PPV and PMTF-PPV were shown at 507, 524, 556, and 616 nm, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.667-670
• /
• 2007

A new series of highly bright and efficient poly(pphenylenevinylene) s (PPV)s based on polyhedral oligomeric silsesquioxanes (POSSs) was synthesized via the Gilch polymerization method. The three POSScontaining PPVs are as follows: POSS05- PPV(containing 5 mol % POSS-appended PPV units), POSS25-PPV(containing 25 mol % POSS-appended PPV units), and POSS100-PPV(containing 100 mol % POSS-appended PPV units; this is the first ${\pi}-conjugated$ polymer composed of 100 mol % POSSsappended repeating units). The POSS-containing PPVs exhibit higher glass transition temperatures $(64-77^{\circ}C)$ than that of MEH-PPV $(58^{\circ}C)$, indicating that electroluminescence (EL) devices fabricated with these polymers should have good thermal stabilities. Light-emitting diodes (LEDs) with the configuration of ITO/PEDOT:PSS/polymer/Ca/Al were fabricated using the novel POSS-containing PPVs. Surprisingly, the luminescence efficiency (0.48 cd/A at $10540\;cd/m^2$) of the binary blend consisting 5 wt % of POSS25-PPV and 95 wt % of MEH-PPV was found to be enhanced by a factor of 6.4 with a maximum brightness of $11010cd/m^2$ (at 14.3 V).

• Bulletin of the Korean Chemical Society
• /
• 제26권5호
• /
• pp.795-801
• /
• 2005

New PPV derivatives which contain electron-withdrawing trifluoromethyl ($CF_3$) group, poly[2-(2-ethylhexyloxy)-5-(4-trifluoro methylphenyl)-1,4-phenylenevinylene] (EH$CF_3$P-PPV), and poly[2-(2-ethylhexyloxy)-5-(3,5-bis(trifluoromethyl)-phenyl)-1,4-phenylenevinylene] (EHB$CF_3$P-PPV), have been synthesized by GILCH polymerization. As the result of the introduction of the electron-withdrawing $CF_3$ group to the phenyl substituent, the LUMO and HOMO energy levels of EH$CF_3$P-PPV (2.8, 5.1 eV) and EHB$CF_3$P-PPV (3.0, 5.3 eV) were lower than those of known poly[2-(2-ethylhexyloxy)-5-phenyl-1,4-phenylenevinylene] (EHP-PPV) (2.6, 4.9 eV). These polymers have been used as the electroluminescent (EL) layers in double layer lightemitting diodes (LEDs) (ITO/PEDOT/polymer/Al). EH$CF_3$P-PPV, and EHB$CF_3$P-PPV show maximum photoluminescence (PL) peaks at ${\lambda}_{max}$ = 550, 539 nm, and maximum EL peak at ${\lambda}_{max}$ = 545, 540 nm, respectively. The current-voltage-luminance (I-V-L) characteristics of the polymers show that turn-on voltages of EH$CF_3$P-PPV and EHB$CF_3$P-PPV are around 4.0 and 3.5 V, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1383-1385
• /
• 2005

We synthesized new poly(p -phenylene vinylene) (PPV) derivatives including different portions of crosslink that could interconnect the backbone of PPV for application in optoelectronic devices such as lightemitting-diodes, photovoltaic cells, and lasers. The fluorescence and electroluminescence properties of PPV including crosslink were discussed with respect of their structure and length of crosslink unit.

• Journal of Microbiology and Biotechnology
• /
• 제11권4호
• /
• pp.619-627
• /
• 2001

n order to increase the virus safety of a human intravenous immunoglobulin (IVIg) that was manufactured by a successive process of cold ethanol fractionation, polyethylene glycol precipitation, and pasteurization ($60^{\circ}C$ heat treatment for 10h), a low pH incubation process (pH 3.9 at $25{\circ}C$ for 14 days) was employed as the final step. The efficacy and mechanism of the fraction III cold ethanol fractionation, pasteurization, and low pH treatment steps in the removal and/or inactivation of blood-borne viruses were closely examined. A variety of experimental model viruses for human pathogenic viruses, including the Bovine herpes virus (BHV), Bovine viral diarrhoea virus (BVDV), Murine encephalomyocarditis virus (EMCV), and Porcine parvovirus (PPV), were selected for this study. The mechanism of reduction for the enveloped viruses (BHV and BVDV) during fraction III fractionation was both inactivation and partitioning, however, it was partitioning in the case of the nonenveloped viruses (EMCV and PPV). The log reduction factors achieved during fraction III fractionation were ${\geqq}$6.7 for BHV, ${\geqq}4.7$ for BVDV, 4.5 for EMCV, and 4.4 for PPV. Pasteurization was found to be a robust and effective step in inactivating all the viruses tested. The log reduction factors achieved during the pasteurization process were ${\geqq}7.5$ for BHV, ${\geqq}4.8$ for BVDV, 3.0 for EMCV, and 3.3 for PPV. A low pH incubation was very effective in inactivating the enveloped viruses as well as EMCV. The log reduction factors achieved during low pH incubation were ${\geqq}7.4$ for BHV, ${\geqq}3.9$ for BVDV, 5.2 for EMCV, and 2.0 for PPV. These results indicate that the low pH treatment successfully improved the viral safety of the final products.

• Journal of Microbiology and Biotechnology
• /
• 제10권6호
• /
• pp.858-864
• /
• 2000

The purpose of the present study was to examine the efficacy and mechanism of the fraction IV cold ethanol fractionation and pasteurization ($60^{\circ}C$ heat treatment for 10h) steps, involved in the manufacture of albumin from human plasma, in the removal and/or inactivation of blood-born viruses. A variety of experimental model viruses for human pathogenic viruses, including the Bovine viral diarrhoea virus (BVDV), Bovine herpes virus (BHV), Murine encephalomyocarditis virus (EMCV), and Porcine parvovirus (PPV), were selected for this study. Samples from the relevant stages of the production process were spiked with the viruses, and the amount of virus in each fraction was then quantified using a 50% tissue culture infectious dose ($TCID_{50}$). The mechanism of reduction for the enveloped viruses (BHV and BVDV) during fraction IV fractionation was inactivation rather than partitioning, however, it was partitioning in the case of the non-enveloped viruses (EMCV and PPV). The log reduction factors achieved during fraction IV fractionation were ${\geq}6.9$ BHV, $\geq5.2$ for BBDV, 4.9 for EMC, and 4.0 for PPV. Pasteurization was found to be a robust and effective step in inactivating the enveloped viruses as well as EMCV. The log reduction factors achieved during pasteurization were $\geq7.0$ for BHV, $\geq6.1$ for BVDV, $\geq6.3$ for EMCV, and 1.7 for PPV. These results indicate that the production process for albumin has sufficient virus-reducing capacity to achieve a high margin for virus safety.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1421-1423
• /
• 2005

A new light-emitting poly(p-phenylenevinylene) (PPV) derivative containing a polyhedral oligomeric silsequioxane (POSS-PPV) and its MEH-PPV copolymers, [Poly(POSSPV-co-MEHPV)]s, have been synthesized through the Gilch polymerization, and their light-emitting properties were investigated. The synthesized polymers were characterized by NMR, GPC, thermogravimetric and elemental analysis. The POSS-PPV and copolymers showed almost the same optical properties as the MEH-PPV, regardless of copolymer composition. The POSS-PPV and MEHPPV all showed their peak absorption at 505 and 496nm, and PL emission maxima at 578 and 581nm. POSSPPV showed higher PL quantum efficiency than the MEH-PPV. Synthesis, characterization and electroluminescent properties of the polymers will be presented.

• Journal of Microbiology and Biotechnology
• /
• 제11권3호
• /
• pp.497-503
• /
• 2001

The purpose of this study was to examine the efficacy and mechanism of the cryo-precipitation, solvent/detergent (S/D) treatment, monoclonal anti-FVIIIc antibody (mAb) column chromatography, Q-Sepharose column chromatography, and lyophilization involved in the manufacture of antithemophilic factor VII(GreenMono) from human plasma, in the removal and/or inactivation of blood-borne viruses. A variety of experimental model viruses for human pathogenic viruses, including the bovine viral diarrhoea virus (BVDV), bovine herpes virus (BHV), murine encephalomyocarditis virus (EMCV), and porcine parvovirus (PPV), were all selected for this study. BHV and EMCV were effectively partitioned from a factor VII during the cryo-precipitation with a log reduction factor of 2.83 and 3.24, respectively. S/D treatment using the organic solvent, tri(n-butyl) phosphate (TNBP), and the detergent, Triton X-100, was a robust and effective step in inactivating enveloped viruses. The titers of BHV and BVDV were reduced from the initial titer of 8.85 and $7.89{log_10} {TCID_50}$, respectively, reaching undetectable levels within 1 min of the S/D treatment. The mAb chromatography was the most effective step for removing nonenveloped viruses, EMCV and PPV, with the log reduction factors of 4.86 and 3.72, respectively. Q-Sepharose chromatography showed a significant efficacy for partitioning BHV, BVDV, EMCV, and PPV with the log reduction the log reduction factors of 2.32, 2.49, 2.60, and 1.33 respectively. Lyophilization was an effective step in inactivating g nonenveloped viruses rather than enveloped viruses, where the log reduction factors of BHV, BVDV, DMCV, and PPV were 1.41, 1.79, 4.76, and 2.05, respectively. The cumulative log reduction factors of BHV, BVDV, EMCV, and PPV were ${\geqq}$11.12, ${\geqq}$7.88, 15.46, and 7.10, respectively. These results indicate that the production process for GreenMono has a sufficient virus-reducing capacity to achieve a high margin of the virus safety.

• 대한화학회지
• /
• 제54권6호
• /
• pp.711-716
• /
• 2010

비닐렌기에 플루오르 치환기를 도입한 새로운 전자발광 (EL) 고분자인 poly(m-silylphenyl-p-phenylene-difluorovinylene) (m-SiP-PPDFV)는 GILCH polymerization 방법에 의해 합성된다. 이들 고분자는 단층 구조 (ITO/PEDOT/polymer/Ca:Al)의 light-emitting diodes (LEDs)에서 EL 발광층으로 사용되었다. m-SiP-PPDFV는 $\lambda_{max}$ = 452 nm 주위에서 PL 발광파장을 나타내었고, $\lambda_{max}$ = 497 nm 주위에서 녹색의 EL 발광을 나타내었다. 고분자의 current-voltage-luminance (I-V-L) 특성에서는 4.0 V 정도에서부터 소자가 작동되기 시작하였다. 고분자의 전자 친화도를 증가시키는 m-SiP-PPDFV을 얻기 위해 m-SiP-PPV의 모든 비닐렌기에 두개의 플루오르기를 도입하였고, 이로 인하여 소자 구동에서 비닐렌기의 색 안정도를 나타냈었다. PPV 유도체들에서 일어나는 비닐렌기의 산화반응을 보호하는 플루오르기는 전자 끄는 효과를 가지고 있어 소자의 색 안정도를 유지시킨다. 이번 연구로, 보다 안정화된 PPV 유도체를 얻기 위해, 플루오르기가 비닐렌기에 도입될 수 있음을 보여주고 있다.

• Bulletin of the Korean Chemical Society
• /
• 제29권1호
• /
• pp.139-147
• /
• 2008

New PPV derivatives which contain electron-withdrawing CF3F4phenyl group, poly[2-(2-ethylhexyloxy)-5-(2,3,5,6-tetrafluoro-4-trifluoromethylphenyl)-1,4-phenylenevinylene] (CF3F4P-PPV), and poly[2-(4-(2-etylhexyloxy)-phenyl)-5-(2,3,5,6-tetrafluoro-4-trifluoromethylphenyl)-1,4-phenylenevinylene] (P-CF3F4P-PPV), have been synthesized by GILCH polymerization. As the result of the introduction of the electron-withdrawing CF3F4phenyl group to the phenyl backbone, the LUMO and HOMO energy levels of CF3F4P-PPV (3.14, 5.50 eV) and P-CF3F4P-PPV (3.07, 5.60 eV) were reduced. The PL emission spectra in solid thin film are more red-shifted over 50 nm and increased fwhm (full width at half maximum) than solution conditions by raising aggregation among polymer backbone due to electron withdrawing effect of 2,3,5,6-tetrafluoro-4-trifluoromethylphenyl group. The EL emission maxima of CF3F4P-PPV and P-CF3F4P-PPV appear at around 530-543 nm. The current density-voltage-luminescence (J-V-L) characteristics of ITO/PEDOT/polymer/Al devices of CF3F4P-PPV and P-CF3F4P-PPV show that turn-on voltages are around 12.5 and 7.0 V, and the maximum brightness are about 82 and 598 cd/m2, respectively. The maximum EL efficiency of P-CF3F4P-PPV (0.51 cd/A) was higher than that of CF3F4P-PPV (0.025 cd/A).