• 멤브레인
• /
• 제21권2호
• /
• pp.141-147
• /
• 2011

바나듐 레독스-흐름 전지 (V-RFB)용 격막으로 사용하기 위해 폴리설폰(psf)에 폴리페닐렌설파이드설폰(PPSS)을 블록 공중합 시킨 폴리머와 여기에 TPA (tungstophosphoric acid)를 첨가하여 양이온교환막을 제작하였다. 제작한 막은 1M $H_2SO_4$용액을 사용하여 막 저항을 평가하였다. 제작한 Psf-PPSS와 Psf-TPA-PPSS 양이온교환막의 막 저항은 약 $0.94{\Omega}{\cdot}cm^2$를 나타냈다. 제작한 양이온교환막과 Nafion117을 격막으로 사용하여 V-RFB의 전기화학적 특성을 평가하였다. 4 A의 전류에서 측정한 V-RFB의 충 방전 셀 저항은 막의 종류에 따라 Nafion117 < Psf-TPA-PPSS < Psf-PPSS 의 순서로 값이 낮았다. 막을 5가 바나듐 수용액에 침적하여 침적시간 변화에 따른 V-RFB의 총 방전 셀 저항을 측정함으로써 내구성을 평가하였다. 내구성은 제작한 Psf-PPSS 막이 가장 우수하였으며, Nafion117막과 제작한 Psf-TPA-PPSS막이 서로 동등하였다.

• 공업화학
• /
• 제9권3호
• /
• pp.440-444
• /
• 1998

p-Dichlobenzene(DCB), p-dibromobenzene(DBB), p-diiodobenzene(DIB) 및 4-chlorophenyl sulfone(CPS)을 공단량체로, 그리고 N-methyl-2-pyrrolidinone(NMP)를 용매로 사용하여 고온, 고압하에서 poly(phenylene sulfide-co-phenylene sulfide sulfone), PPS/PPSS 공중합체를 합성하고 공중합 반응 특성과 합성된 공중합체들의 구조 및 열적성질에 대해 조사하였다. PPS/PPSS 공중합체의 수율은 [DBB]/[CPS] 및 [DIB]/[CPS] 공단량체 조합의 경우 [DCB]/[CPS] 공단량체 조합보다 낮은 온도인 $190^{\circ}C$에서 최고 수율을 나타내었으며 [DCB]/[CPS] 공단량체 조합의 경우는 이보다 높은 온도인 $230^{\circ}C$에서 최고 수율을 나타내어 leaving group이 I>Br>Cl의 순서로 공중합 반응이 잘 진행되었으며 이것으로부터 공중합 반응은 nucleophilic aromatic substitution(SNAr) 기구에 적합함을 알 수 있었다. [DBB]/[CPS] 공단량체 조합중에서 CPS의 공급비가 10 mol%일 때 생성된 PPS/PPSS 공중합체의 분자량은 8,330g/mol로 가장 높게 나타났다. CPS 단량체의 공급비가 30 mol% 이상일 경우 생성되는 PPS/PPSS 공중합체는 $T_m$을 나타내지 않았으나, CPS의 공급비가 10 mol%인 PPS/PPSS 공중합체 시료의 경우 $T_g$는 약 $15^{\circ}C$ 증가하였고 $T_m$은 약 $15^{\circ}C$ 감소하여 열적 성질이 향상되는 것을 볼 수 있었다. 또 중합 온도를 $240^{\circ}C$로 고정하고 [DBB]/[CPS]의 공급비를 95/5 mol%로 하여 얻어진 PPS/PPSS 공중합체는 PPS 단독 중합체보다 분자량이 높게 나타나 PPS 단독 중합체의 고결정성 및 내열성을 유지한채 PPS 단독 중합체의 결점의 하나인 중합도를 향상시킬 수 있는 방법으로 이용될 수 있다고 생각되었다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권3호
• /
• pp.1169-1173
• /
• 2015

Background: Paris polyphylla (Chinese name: Chonglou) had been traditionally used for a long time and shown anti-cancer action. Based on the previous study that paris polyphylla steroidal saponins (PPSS) induced cytotoxic effect in human lung cancer A549 cells, this study was designed to further illustrate the mechanisms underlying. Materials and Methods: The mechanisms involved in PPSS-induced A549 cell death were investigated by phase contrast microscopy and fluorescence microscopy, flow cytometry and western blot analysis, respectively. Results: PPSS decreased the proportion of viable A549 cells, and exposure of A549 cells to PPSS led to both apoptosis and autophagy. Apoptosis was due to activations of caspase-8, caspase-3, as well as cleavage of PARP, and autophagy was confirmed by up-regulation of Beclin 1 and the conversion from LC3 I to LC3 II. Conclusions: PPSS was able to induce lung cancer A549 cell apoptosis and autophagy in vitro, the results underlining the possibility that PPSS would be a potential candidate for intervention against lung cancer.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권24호
• /
• pp.10911-10916
• /
• 2015

Background: Tumor metastases are the main reasons for oncotherapy failure. Paris polyphylla (Chinese name: Chonglou) has traditionally been used for its anti-cancer actions. In this article, we focus on the regulation of human lung cancer A549 cell metastases and invasion by Paris polyphylla steroidal saponins (PPSS). Materials and Methods: Cell viability was evaluated in A549 cells by MTT assay. Effects of PPSS on invasion and migration were investigated by wound-healing and matrigel invasion chamber assays. Adhesion to type IV collagen and laminin was evaluated by MTT assay. Expression and protease activity of two matrix metalloproteinases (MMPs), MMP-2 and MMP-9, were analyzed by Western blotting and gelatin zymography, respectively. Results: PPSS exerted growth inhibitory effects on A549 cells, and effectively inhibited A549 cell adhesion, migration and invasion in a concentration-dependent manner. Western blotting and gelatin zymography analysis revealed that PPSS inhibited the expression and secretion of MMP-2 and MMP-9 in A549 cells. Conclusions: PPSS has the potential to suppress the migration, adhesion and invasion of A549 cells. PPSS could be a potential candidate for interventions against lung cancer metastases.

• 공업화학
• /
• 제4권3호
• /
• pp.544-548
• /
• 1993

Poly(phenylene sulfide sulfone)[PPSS]를 시간과 온도를 변화시키면서 열처리를 하였을 때 이들의 유리전이 온도($T_g$)를 DSC로서 조사하였다. 그 결과 PPSS의 $T_g$는 열처리온도가 $230^{\circ}C$까지는 열처리 시간이 길어질수록 증가하다가 평형에 도달하였다. 열처리 온도가 $245^{\circ}C$ 이상에서는 열처리 시간이 길어질수록 $T_g$가 증가하다가 어느 정도 시간이 되면 감소한 뒤 다시 증가하는 것으로 나타났다. 이 현상을 경화가 진행됨에 따른 chain extension반응과 oxidative crosslinking 및 thermal crosslinking으로 설명하였다.

• 멤브레인
• /
• 제10권2호
• /
• pp.66-74
• /
• 2000

In consideration that a high tensile strength and ion exchange capacity are maintained as the swelling of membrane is controlled by the coagulation of PSf with the introduction of ion exchange groups and PPSS without the introduction of ion exchange groups, the block copolymer of PSf and PPSS were synthesized. The cation exchange membrane was prepared by sulfonation with CSA and casted. The synthesized block copolymer and cation exchange membrane were characterized by FT-IR and their thermal stability was confirmed by TGA. The optimum sulfonation could be accomplished at a mole ratio of BPSf to CSA 1:3. The best electrochemical properties obtained by the optimal condition were area resistance of 4.37 $\Omega$ㆍ$\textrm{cm}^2$, ion exchange capacity of 1.71 meq/g dry membrane, water content of 0.2941 g $H_2O$/g dry membrane, and fixed ion concentration of 5.81 meq/g $H_2O$. When GBL was used as an additive, area resistance was increased by 13.7 % and ion exchange capacity was increased by 14.6%. When the membrane was fabricated in a form of composite using non woven cloth as a support. the tensile strength of membrane could be improved, but the electrochemical characteristics were not influenced.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1991년도 추계 총회 및 학술발표회
• /
• pp.9-16
• /
• 1991

The current status of reverse osmosis and ultrafiltration membranes are reviewed with the view for the future. In the case of reverse osmosis (RO) membranes, as examples, new crosslinked aromatic polyamide membranes exhibited the superior separation performance with the sufficient water permeability, the high tolerance for oxidizing agents and chemicals. Ultrafiltration (UF) membrane based on poly(phenylene sulfide sulfone) (PPSS) also exibited the superior separation performance with the high solvent, heat and fouling resistance.

• 한국수소및신에너지학회논문집
• /
• 제16권2호
• /
• pp.103-110
• /
• 2005

Proton conducting solid polymer electrolyte (SPE) membranes have been used in many energy technological applications such as water electolysis, fuel cells, redox-flow battery, and other electrochemical devices. The availability of stable membranes with good electrochemical characteristics as proton conductivity at high temperatures above 80 $^{\circ}C$ and low cost are very important for its applications. However, the presently available perfluorinated ionomers are not applicable because of high manufacturing cost and high temperature use to the decrease in the proton conductivity and mechanical strength. In order to make up for the weak points, the block copolymer (BPSf) of polysulfone and poly (phenylene sulfide sulfone) were synthesized and sulfonated. The electrolyte membranes were prepared with phosphotungstic acid (HPA)/sulfonated BPSf via solution blending. This study would be desirable to investigate the interaction between the HPA and sulfonated polysulfone. The results showed that the characteristics of SPSf/HPA blend membrane was a better than Nafion at high temperature, 100 $^{\circ}C$. These membranes proved to have a high proton conductivity, $6.29{\times}10-2$ S/cm, a water content, 23.9%, and a ion exchange capacity, 1.97 meq./g dry membrane. Moreover, some of the membranes kept their high thermal and mechanical stability.

• 멤브레인
• /
• 제29권3호
• /
• pp.155-163
• /
• 2019

폴리에테르설폰(PES)과 폴리페닐렌설파이드설폰(PPSS)을 블렌딩한 고분자를 이용하여 음이온교환막을 제작하였다. EDXS와 FT-IR 분석으로부터 제작한 음이온교환막이 음이온교환기인 -N-을 갖는다는 것을 확인하였다. 1 mol/L의 황산용액에서 이온전도도를 측정하였다. 제작한 음이온교환막은 0.015~0.083 S/cm의 이온전도도를 가졌으며, 시판의 음이온교환막인 AFN과 APS의 값과 비교하여 동등 이상의 값을 가졌다. 제작한 음이온교환막의 바나듐 레독스 흐름 전지용 격막으로 사용한지를 평가하기 위해 각 바나듐 이온의 투과를 측정하였다. 제작한 음이온교환막의 각 바나듐 이온의 투과도는 시판의 양이온교환막인 Nafion 117과 시판의 음이온교환막인 AFN과 비교하여 낮은 값을 가졌다.

• 센서학회지
• /
• 제25권2호
• /
• pp.110-115
• /
• 2016

This paper describes the design and fabrication of a three-axis force sensor with three parallel plate structures(PPSs) for measuring force in a finger force measuring system for a spherical object catch. The three-axis force sensor is composed of a Fx force sensor, Fy force sensor and a Fz force sensor, and the elements of Fx force sensor and Fy force sensor are a parallel plate structure(PPS) respectively and Fz force sensor is two PPS. The three-axis force sensor was designed using FEM(Finite Element Method), and manufactured using strain-gages. The characteristics test of the three-axis force sensor was carried out. As a test results, the interference error of the three-axis force sensor was less than 1.32%, the repeatability error of each sensor was less than 0.04%, and the non-linearity was less than 0.04%.