• Title/Summary/Keyword: PP2A

Search Result 1,080, Processing Time 0.026 seconds

A study for Beating Filter Press Dewatering Technology (열(熱) 필터프레스 기술(技術)을 통한 슬러지 탈수율(脫水率) 향상(向上)을 위한 연구(硏究))

  • Lee, Jung-Eun;Kim, Dong-Su
    • Resources Recycling
    • /
    • v.15 no.3 s.71
    • /
    • pp.38-45
    • /
    • 2006
  • The thermal filter press dewatering(TFPD) technology to improve the dewaterability through increasing the inner vapor pressure, lowering the filtration viscosity and forming the porosity easily within cake as applying the heat at the sludge layer was developed in this study. The hot water with temperature of $95^{\circ}C$ and pressure of $1.2kg_f/cm^2$ was supplied to the heating plate equipped between filter plates with plate size of $470{\times}470mm$ and material of polypropylene. Sludge was dewaterd by supplying pressure of $5kg_f/cm^2$ and then by squeezing pressure of $15kg_f/cm^2$. As a results of estimating the characteristics of thermal dewatering to consider the initial water content and organic content to be influenced by a period of water shortage and rainwater, the dewatered cake water content was about 35 wt% and dewatering velocity was $4DSkg/m^2{\cdot}hr$ under the rainwater period, and the dewatered cake water content was about 50 wt% and dewatering velocity was $1.5DSkg/m^2{\cdot}hr$ in the case of sludge of water shortage season. These results was superior to the mechanical dewatering performance with water content of 70wt% and dewatering velocity of $0.9DSkg/m^2{\cdot}hr$. On the base of the results of TFPD, energy consumpted to deal with DS(Dry Solid) of 1kg was estimated by 300 kJ. It was analyzed that the energy consumption of TFPD was decreased about one third with comparison to the dryer system. Dewatering velocity of this technology was faster than the one of mechanical dewatering equipment and it was easier to product low water content cake. Therefore, this technology was recognized that dewaterability was predominant because of the fast of dewatering velocity and production of low water content cake, and also this known as economical efficiency was excellent because of low energy consumption in comparison with dryer.

Comparative Quality Evaluation of King Oyster Mushroom as Affected by Unit Packaging Method during Simulated Export Shipment (큰느타리버섯의 모의 수출운송과정에서 소포장 적용에 따른 품질변화 비교)

  • Woo, Seong-Min;Park, Youn-Moon;Park, Se Won
    • Horticultural Science & Technology
    • /
    • v.31 no.2
    • /
    • pp.186-193
    • /
    • 2013
  • Potential of consumer unit packaging was investigated for quality maintenance during export simulation in king oyster mushrooms (Pleurotus eryngii). Mushrooms were harvested in late May, precooled to $4^{\circ}C$ within 6 hours, and then packaged for shipping in two ways: 2 kg bulk packaging in a polyethylene (PE) bag or three types of unit packaging methods such as 400 g in polypropylene film bag (PPB), 200 g on styrofoam tray + PE shrinkage film wrapping (STW), and 200 g in polyethylene terephthalate (PET) containers (PETC). For local distribution of bulk-packaged commodity, mushrooms were sorted again and packaged into 3 consumer units in the same way as for the initial shipping packages. Simulation of refrigerated container shipping was performed in a walk-in type pilot storage at $0.5^{\circ}C$ for 5 weeks, while local marketing simulation was carried out on the shelf at $7^{\circ}C$ for 7 days. During the shipment simulation, creation of modified atmosphere (MA) was substantial in 2 kg bulk packages with low $O_2$ below 2% and high $CO_2$ over 15% whereas, in PPB and PETC unit packages, relatively higher $O_2$ concentrations were observed. On the shelf at $7^{\circ}C$, $CO_2$ concentrations rapidly increased in PPB and PETC packages despite the short marketing period. Overall marketability evaluated by off-flavor, browning, and texture rating was maintained at excellent level when 2 kg bulk packaging in PE or unit packaging in PPB and PETC were used for shipment. In contrast, establishment of MA was very slight in STW packages during shipment and local distribution resulting in poor quality after export simulation. The results suggested that shipment using adequate consumer unit packaging is more practical and economically beneficial than using bulk packaging in the export program consisting of 5-week shipment and 7-day local distribution.

Optimized Controlled Atmosphere Regimen for Storage of Fresh Fischer's Ligularia (Ligularia fischeri Turcz.) Leaves (신선 곰취(Ligularia fischeri Turcz.) 잎 저장을 위한 CA 조성 최적화)

  • Park, Yoon-Moon;Kim, Taewan;Kim, Hyun-Seok;Kim, Tae Hoon;Park, Yoo Jin
    • Horticultural Science & Technology
    • /
    • v.33 no.3
    • /
    • pp.375-382
    • /
    • 2015
  • A controlled atmosphere (CA) regimen was optimized during 3 consecutive harvest seasons as the basis of practical modified atmosphere packaging (MAP) storage for quality maintenance and extension of storage potential of fresh Ligularia fischeri leaves. Leaves were harvested in April or May and forced-air cooled to $4^{\circ}C$ before punch-hole MAP (control, where gas concentrations were same as air) and CA treatments. CA regimens adjusted stepwise during 3 experimental years were: 1 and 3% $O_2$, respectively combined with 5 and 10% $CO_2$ in the first year, 3% $O_2$ fixed in combination with 0, 2.5, and 5% $CO_2$ in the second year, and 3% $O_2$ fixed in combination with 2.5 and 5% $CO_2$ in the third year. In the first year, higher incidence of black discoloration was observed with the reduction of respiration under 10% $CO_2$ CA conditions regardless of $O_2$ levels at 1 or 3%. In the second and third year, the incidence of the disorder seemed not to be clearly relevant to CA conditions showing slightly higher incidence only after 4- or 5-week storage + 5-day shelf life. Although texture and appearance quality were maintained better under the 3% $O_2$ + 2.5% $CO_2$condition after 4-week storage + 5-day shelf life, effects of CA on the extension of storage period was slight. Overall results indicated that Ligularia fischeri leaves are very susceptible to $CO_2$ injury. $CO_2$ concentration should be adjusted below 2.5% for safe and effective CA or MAP storage to maintain quality even during short-term storage.

Removal of PVC from Mixed Plastic Waste by Combination of Air Classification and Centrifugal Process (풍력(風力) 및 습식비중(濕式比重) 선별(選別)에 의한 혼합(混合)폐플라스틱 종말품(終末品)으로부터 PVC 제거(除去)에 관한 연구(硏究))

  • Choi, Woo-Zin;Yoo, Jae-Myung
    • Resources Recycling
    • /
    • v.16 no.5
    • /
    • pp.71-76
    • /
    • 2007
  • The mixed plastic waste generated from households after hand-picking and/or mechanical sorting processes amounts to 1,750,000 ton in 2006, and most of these waste are finally end up with landfill and/or incineration due to the lacks of separation technologies and economical reasons. The mixed plastic wastes can not be used as raw materials for chemical and/or thermal recycling processes because of their high content of PVC(upto 4.0 wt.%). In the present research, gravity separation system has been developed to remove PVC from the mixed plastic waste and to recover the PO-type plastics. This system mainly consists of air classification, magnetic separation, one-step crushing, feeding system at fixed rate and wet-type gravity separation system. The gravity system based on centrifugal separation has been developed at capacity of 0.5 ton/h and it consists of mixing, precleaning, separation, dewatering, recovery system and wastewater treatment system, etc. The main objective of this process is to achieve high separation efficiency of polyolefins with less than 0.3 wt.% PVC content and less than 10% moisture content in the final products. In addition, a crushing unit of with 8 rotor system is also developed to improve the crushing efficiency of soft-type plastics. The system with a capacity of 1.0 ton/h is developed and operational results are presented.

Studies on the Epidemiological Change of Clonorchiasis After Mass Chemotherapy in Highly endemic Areas (집단치료사업에 따른 간흡충증의 역학적 변동에 관한 조사)

  • Joo, Kyoung-Hwan;Chu, Paul B.;Rim, Han-Jong;Lee, Joon-Sang
    • Journal of agricultural medicine and community health
    • /
    • v.12 no.1
    • /
    • pp.80-93
    • /
    • 1987
  • Mass chemotherapy of Clonorchis sinensis infection in Korea was started in 1982 with 40mg/kg body weight single dose administration scheme of praziquantel. The purpose of this study was to investigate the efficiency of current mass chemotherapy project and compare the epidemiological changes in endemic area of Ckmorchis sinensis. This study was performed at Kimhae-city and Samrangjin-eup of Miryang-gun, Kyongnam province, highly endemic area of C. sinensis located southeastern part of Korea from July to October of 1986. The therapy project of Kimhae area was performed in 1984, whereas that of Samrangjin was done in 1985 by stool examination of the Korea Association for Parasite Eradication(KAPE) and drug administration of local health centre. The results obtained were as follows; 1) As a results of stool examination from 234 specimens obtained in Kimhae area, the infection rate has decreased to 34.2%from 45.6p in 1983, but the infection rate of C. sinensis from 341 specimens obtained in Samrangjin area did not decrease (58.1%in 1986 490%in 1983). 2) The study in Kimhae area showed that the average EPG decreased remarkably from 4,858 to 1,340 and those classified above the category of heavy infection decreased also from 14.0pp to 1.7%. The study in Samrangjin area showed that the average EPG did decrease drastically from 9,597 to 6,498 and those classified above the category of heavy infection did not go down drastically from 25.2% to 14.2%. 3) The study in Kimhae area showed decrease of Cs.$D._{50}$ in comparison to that in 1983, wheareas Cs.$D._{50}$ in Samrangjin area showed no much difference compared to that in 1983. The intensities of endemicity were represented with the regression equation calculated with the cumulative percentages of EPG count. Regression equation was Y=4.49+1.19 log x in Kimhae area and Y=3.66+127 log x in Samrangjin area. 4) The two stage catalytic model was applied and the calculation lead to the equation $Y=5.33(e^{-0.018t}-e^{-0.016t})$ in Kimhae area and $Y=1.25(e^{-0.010t}-e^{-0.018t})$ in Kimhae area and $Y=125(e^{-0.010t}-e^{-0.050t})$ in Samrangjin area 5) The infection rate of cercaria in P.manchouric-us studied in Kimhae area showed 1.25% which is not much different from that in previous years, wheareas the infection rate of metacercaria in P. parva studied in the same area this year showed 2.5-20.2/gm of flesh in comparison to 64/gm of flesh in 1983. 6) Data of C. sinensis infection on the reservoir host in Kimhae area showed 4 out of 18 dogs, 1 out of 18 rats and that in Samrangjin area showed 2 out of 18 dogs respectively. 7) Among the inhabitants who were under mass chemotherapy in Kimhae area, 71out of them, upon stool examination, showed infection rate of 66.2% and those classified above the category of heavy infection, 2.4%. In comparison to infection rate of 33.7% and those classified above the category of heavy infection, which is 1.0%, obtained from those not under mass chemotherapy showed higher infection rate and somewhat equal distribution of intensity of infection. The above statements reflect the fact that individual therapy besides mass chemotherapy was prevalent in that area. 8) On the other side, the studies in Samrangjin area showed infection rate of 68.7% and those above the category of heavy infection, which is 6.1%, in comparison to infection rate of 58.3% and those above the category of heavy infection, which is 16.5%, in those not under mass chemotherapy. the above reflects that although a good deal of inhabit-ants were classified under light or moderate infection category, those above the category of heavy infection, yet, numbered a lot, and individual chemotherapy has not been going on. In conclusion, it was suggested that the number of reinfected inhabitants among those under mass chemotherapy were numerous. Accordingly, the reinforcement of health education should be followed with mass chemotherapy. The facts of high infection rate exemplified by 65% and high number of those above the category of heavy infection in Samrangjin area say that reevaluation of dosage, number of medication and intervals should be necessarily made.

  • PDF

Effect of Packaging Material on Quality of Kimchi During Storage (포장재질이 김치의 품질변화에 미치는 영향)

  • Kim, Yun-Ji;Hong, Seok-In;Park, Noh-Hyun;Chung, Tae-Yon
    • Korean Journal of Food Science and Technology
    • /
    • v.26 no.1
    • /
    • pp.62-67
    • /
    • 1994
  • Quality change of Kimchi packaged with Ny/PE, Ny/CPP (PPtray+Ny/CPP cover), Cryovac BK-1, BK-4, and PET/Al/PE film was observed during storage at $5^{\circ}C$ (97%RH) and $20^{\circ}C$ (76%RH). To evaluate quality change of Kimchi, gas composition of package, pH, acidity, color, growth of lactic acid bacteria, and sensory score were measured periodically. Regarding to gas composition of package, Kimchi packaged with PET/Al/PE showed higher oxygen concentration at the beginning of storage than the others; carbon dioxide concentration was almost 100% at the end of storage. Carbon dioxide concentration of Kimchi packaged with Cryovac BK-1 and BK-4 which has higher gas permeability than the others, was increased to a maximum and then decreased due to permeation of gas during storage; oxygen concentration was increased. Unlike Kimchi packaged with Ny/PE, Ny/CPP, and PET/Al/PE, package swelling was not observed in Kimchi packaged with Cryovac BK-1 and BK-4 during storage. Although pH change was not significant depending on the packaging material, Kimchi packaged with Cryovac BK-1 and BK-4 showed lower pH value and higher acidity than those of the others. Color change of Kimchi was different depending on the packaging material during storage. Difference of the growth of lactic acid bacteria and sensory evaluation were not significant among Kimchi packaged with different packaging material during storage at either temperature. In conclusion, the effect of packaging materials on the quality change of Kimchi was not significant; however, to prevent from swelling of packaged Kimchi which is one of the most serious problem during storage and distribution, might be avoided by using relatively high $CO_2$ permeable film than high gas barrier film.

  • PDF

Plantar foot pressure analysis during golf swing motion using plantar foot pressure measurement system (족저압력분포 측정장비를 이용한 골프 스윙시 족저압 분석)

  • Lee, Dong-Ki;Lee, Joong-Sook;Lee, Bom-Jin;Lee, Hun-Sik;Kim, Young-Jae;Park, Seung-Bum;Joo, Jong-Peel
    • Korean Journal of Applied Biomechanics
    • /
    • v.15 no.1
    • /
    • pp.75-89
    • /
    • 2005
  • D. K. LEE, J. S. LEE, B. J. LEE, H. S. LEE, Y. J. KIM, S. B. PARK, J. P. JOO. Plantar foot pressure analysis during golf swing motion using plantar foot pressure measurement system. Korean Journal of Sport Biomechanics, Vol. 15, No. 1, pp. 75-89, 2005. In this study, weight carrying pattern analysis and comparison method of four foot region were suggested. We used three types of club(driver, iron7, pitching wedge). This analysis method can compare between top class golfer and beginner. And the comparison data can be used to correct the swing pose of trainee. If motion analysis system, which can measure the swing speed and instantaneous acceleration at the point of hitting a ball, is combined with this plantar foot force analysis method, new design development of golf shoes to increase comfort and ball flight distance will be available. 1. Address acting, forces concentrated in rare foot regions and lateral foot of right foot. Back swing top acting, relatively high force occurred in medial forefoot region of left foot and forefoot region of right foot. Impact acting, high force value observed in the lateral rarefoot region of left foot and medial forefoot region of right foot. Finish acting, force concentration observed on the lateral region and rarefoot region of left foot. 2. Forces were increased in address of right foot with clubs length increased. All clubs, back swing top acting, high force value observed in the lateral forefoot region of right foot. All clubs, in impact, high force value observed in the lateral rarefoot region of left foot and medial forefoot region of right foot. Finish acting, force concentration observed on the rarefoot region in driver and lateral foot region in iron on left foot. 3. Right foot forces distribution were increased in address, back swing top and left foot force distribution were increased in impact, finnish

What determines dental protrusion or crowding while both malocclusions are caused by large tooth size? (치아전돌자와 치아밀집자의 측모두부방사선학적 비교)

  • Sun, Min-Kyu;Kim, Jae-Hyung;Cho, Jin-Hyoung;Kim, Jeong-Moon;Hwang, Hyeon-Shik
    • The korean journal of orthodontics
    • /
    • v.39 no.5
    • /
    • pp.330-336
    • /
    • 2009
  • Objective: To examine the differences in lateral cephalometric characteristics between patients with dental protrusion and crowding in order to determine what factors affect dental protrusion or crowding while both malocclusion types are caused by large tooth size. Methods: Twenty nine individuals with dental protrusion and 22 individuals with dental crowding were enrolled in this study. All subjects had larger teeth than average and Class I molar relationships. Craniofacial characteristics and hyoid bone positions were determined from lateral cephalograms and compared between the two groups. Results: In the comparisons of craniofacial characteristics, the measurements indicating maxillary length and facial convexity showed greater values in the protrusion group than in the crowding group. Comparisons of hyoid bone positions showed that the hyoid bone was positioned more anteriorly and superiorly in the protrusion group than in the crowding group. Conclusions: The results of the present study indicate that some craniofacial characteristics and tongue position may affect the development of dental protrusion or crowding; when an individual has large teeth, dental protrusion or crowding might be determined according to maxillary growth and tongue position.

Differences of overall characteristics depending on Symptom Severity in Acute Stroke Patient (급성기 중풍 환자의 증상 경중에 따른 제반특성의 차이)

  • Woo, Su-kyung;Leem, Jung-Tae;Park, Su-kyung;Kwak, Seung-hyuk;Lee, Eun-chan;Park, Joo-young;Jung, Woo-sang;Moon, Sang-kwan;Cho, Ki-ho;Park, Sung-wook;Ko, Chang-nam
    • The Journal of the Society of Stroke on Korean Medicine
    • /
    • v.12 no.1
    • /
    • pp.32-40
    • /
    • 2011
  • Objective : The aim of this study was to examine Differences of overall characteristics depending on Symptom Severity in Acute Stroke Patient Method : We studied hospitalized patients within 10days after their ictus who were admitted at Kyunghee University Oriental Medical Center from May 2011 to October 2011. We compared the general characteristics of acute stroke patient according to Scandinavian Stroke Scale score Result : The patient who had mild severity show significant difference for FBS, PP2, Homocysteine, Exercise, Tongue color, Mouth dryness, Chest discomfort, Constipation, Stool hardness. Conclusion : The above result contribute to predict severity of stroke symtoms according to risk factor and general condition of patients. Also, After occurrence of stroke, We will can block worsening of symptoms progression. Further studies will be needed to observation of follow up studies about progression of stroke among acute stroke patients with a serious disability.

  • PDF

Reproducibility of Regional Pulse Wave Velocity in Healthy Subjects

  • Im Jae-Joong;Lee, Nak-Bum;Rhee Moo-Yong;Na Sang-Hun;Kim, Young-Kwon;Lee, Myoung-Mook;Cockcroft John R.
    • International Journal of Vascular Biomedical Engineering
    • /
    • v.4 no.2
    • /
    • pp.19-24
    • /
    • 2006
  • Background: Pulse wave velocity (PWV), which is inversely related to the distensibility of an arterial wall, offers a simple and potentially useful approach for an evaluation of cardiovascular diseases. In spite of the clinical importance and widespread use of PWV, there exist no standard either for pulse sensors or for system requirements for accurate pulse wave measurement. Objective of this study was to assess the reproducibility of PWV values using a newly developed PWV measurement system in healthy subjects prior to a large-scale clinical study. Methods: System used for the study was the PP-1000 (Hanbyul Meditech Co., Korea), which provides regional PWV values based on the measurements of electrocardiography (ECG), phonocardiography (PCG), and pulse waves from four different sites of arteries (carotid, femoral, radial, and dorsalis pedis) simultaneously. Seventeen healthy male subjects with a mean age of 33 years (ranges 22 to 52 years) without any cardiovascular disease were participated for the experiment. Two observers (observer A and B) performed two consecutive measurements from the same subject in a random order. For an evaluation of system reproducibility, two analyses (within-observer and between-observer) were performed, and expressed in terms of mean difference ${\pm}2SD$, as described by Bland and Altman plots. Results: Mean and SD of PWVs for aorta, arm, and leg were $7.07{\pm}1.48m/sec,\;8.43{\pm}1.14m/sec,\;and\;8.09{\pm}0.98m/sec$ measured from observer A and $6.76{\pm}1.00m/sec,\;7.97{\pm}0.80m/sec,\;and\;\7.97{\pm}0.72m/sec$ from observer B, respectively. Between-observer differences ($mean{\pm}2SD$) for aorta, arm, and leg were $0.14{\pm\}0.62m/sec,\;0.18{\pm\}0.84m/sec,\;and\;0.07{\pm}0.86m/sec$, and the correlation coefficients were high especially 0.93 for aortic PWV. Within-observer differences ($mean{\pm}2SD$) for aorta, arm, and leg were $0.01{\pm}0.26m/sec,\;0.02{\pm}0.26m/sec,\;and\;0.08{\pm}0.32m/sec$ from observer A and $0.01{\pm}0.24m/sec,\;0.04{\pm}0.28m/sec,\;and\;0.01{\pm}0.20m/sec$ from observer B, respectively. All the measurements showed significantly high correlation coefficients ranges from 0.94 to 0.99. Conclusion: PWV measurement system used for the study offers comfortable and simple operation and provides accurate analysis results with high reproducibility. Since the reproducibility of the measurement is critical for the diagnosis in clinical use, it is necessary to provide an accurate algorithm for the detection of additional features such as flow wave, reflection wave, and dicrotic notch from a pulse waveform. This study will be extended for the comparison of PWV values from patients with various vascular risks for clinical application. Data acquired from the study could be used for the determination of the appropriate sample size for further studies relating various types of arteriosclerosis-related vascular disease.

  • PDF