• Restorative Dentistry and Endodontics
• /
• 제17권1호
• /
• pp.10-21
• /
• 1992

The purpose of this study was to investigate the analgesic effect of eugenol, capsaicin and demethoxy-NE. Young adult cats, weighing 2.0 to 3.0kg, were used. Each animal was anesthetized (${\alpha}$-chloralose 60mg per kg body weight) and divided into four groups; control, eugenol, capsaicin and demethoxy-NE group. The anterior digastric muscles were exposed and a pair of electrodes was inserted to record the electromyograms. To expose the pulp, each canine teeth was prepared with a low speed bur under cooling and used for recording anterior digastric muscular EMGs evoked by noxious stimulation of dental pulp. To observe effects on jaw opening reflex, inferior alveolar nerve of both sides were exposed for drug application and wire electrodes were inserted in anterior digstric muscle for recording the EMGs. To observe effects on action potential, saphenous nerves of both sides were exposed and three tissue pools were made from surrounding tissue. The most distal pool was used for applying stimulation, the most proximal one for recording of action potential, and the other one for drug application. One side of inferior alveolar nerve and saphenous nerve were used for eugenol, capsaicin, or demethoxy-NE application, the other side of nerve for control experiments(only vehicle application). Anterior digastric muscular EMGs evoked by noxious stimulation of dental pulp were recorded before drug application, immediate after drug application, at 60 and 120 minutes, and 5 days after drug application. Action potentials were recorded before drug application, immediate after 30 minutes drug application, at 30, 60 and 120 minutes after drug had been washed out. The results were as follows; 1. Eugenol had a continuous blocking effect on the anterior digastric muscular EMGs evoked by noxious pulp stimulation and after 5 days, showed completely blocking effect. 2. After 5 days, demethoxy-NE applied to dental pulp had a considerable blocking effect on the jaw opening retlex evoked by noxious stimulation but capsaicin had no significant effect. 3. After 5 days, eugenol group showed the strongest blocking effect among the all experimental groups on the jaw opening reflex evoked by noxious stimulation of dental pulp and capsaicin group showed the weakest blocking effect. 4. Eugenol had a completely blocking effect on the action potential conductivity of peripheral nerve. Capsaicin and demethoxy-NE had the blocking effect on the action potential conductivity of ${\alpha}$-and C-nerve fibers. 5. Capsaicin, demethoxy-NE and eugenol applied to inferior alveolar nerve surppressed the jaw opening reflex evoked by noxious stimulation of dental pulp.

• Nuclear Engineering and Technology
• /
• 제27권4호
• /
• pp.544-554
• /
• 1995

Pool boiling of dilute aqueous solutions of polyethylene oxide polymer has been experimentally investigated for the purpose of understanding the physical mechanisms of the suppression of vapor explosions in this polymer solution. Tn solid spheres of 22.2mm and 9.5mm-diameter ore heat-ed and quenched in the polymer solutions of various concentrations at 3$0^{\circ}C$. The results showed that minimum film boiling temperature($\Delta$ $T_{MFB}$) in this highly-subcooled liquid rapidly decreased from over $700^{\circ}C$ for pure water to about 15$0^{\circ}C$ as the polymer concentration was increased up to 300ppm for 22.2mm sphere, and it decreased to 35$0^{\circ}C$ for 9.5mm sphere. This large decrease of minimum film boiling temperature in this aqueous polymer solution may explain its ability to suppress spontaneous vapor explosions. Also, tests with applying a pressure wave showed that the vapor film behaved more stable against an external disturbance at higher polymer concentrations. These observations together with the experimental evidences of vapor explosion suppression in dilute polymer solutions suggest that the application of polymeric additives such as polyethylene oxide as low as 300ppm to reactor emergency coolant be considered to prevent or mitigate energetic fuel-coolant interactions during severe reactor accidents.s.

• Nuclear Engineering and Technology
• /
• 제50권3호
• /
• pp.356-367
• /
• 2018

A series of tests dedicated to station blackout (SBO) accident scenarios have been recently performed at the $Prim{\ddot{a}}rkreislauf-Versuchsanlage$ (primary coolant loop test facility; PKL) facility in the framework of the OECD/NEA PKL-3 project. These investigations address current safety issues related to beyond design basis accident transients with significant core heat up. This work presents a detailed analysis using the best estimate thermal-hydraulic code TRACE (v5.0 Patch4) of different SBO scenarios conducted at the PKL facility; failures of high- and low-pressure safety injection systems together with steam generator (SG) feedwater supply are considered, thus calling for adequate accident management actions and timely implementation of alternative emergency cooling procedures to prevent core meltdown. The presented analysis evaluates the capability of the applied TRACE model of the PKL facility to correctly capture the sequences of events in the different SBO scenarios, namely the SBO tests H2.1, H2.2 run 1 and H2.2 run 2, including symmetric or asymmetric secondary side depressurization, primary side depressurization, accumulator (ACC) injection in the cold legs and secondary side feeding with mobile pump and/or primary side emergency core coolant injection from the fuel pool cooling pump. This study is focused specifically on the prediction of the core exit temperature, which drives the execution of the most relevant accident management actions. This work presents, in particular, the key improvements made to the TRACE model that helped to improve the code predictions, including the modeling of dynamical heat losses, the nodalization of SGs' heat exchanger tubes and the ACCs. Another relevant aspect of this work is to evaluate how well the model simulations of the three different scenarios qualitatively and quantitatively capture the trends and results exhibited by the actual experiments. For instance, how the number of SGs considered for secondary side depressurization affects the heat transfer from primary side; how the discharge capacity of the pressurizer relief valve affects the dynamics of the transient; how ACC initial pressure and nitrogen release affect the grace time between ACC injection and subsequent core heat up; and how well the alternative feeding modes of the secondary and/or primary side with mobile injection pumps affect core quenching and ensure stable long-term core cooling under controlled boiling conditions.

• Proceedings of the Korea Water Resources Association Conference
• /
• 한국수자원학회 2012년도 학술발표회
• /
• pp.982-982
• /
• 2012

본 연구에서는 우리나라의 중 소규모 유역의 수문학적 위험도 분석을 위하여 한강유역을 대상으로 통합위험지수(IRI: Integrated Risk Index)를 산정하였으며, El Ni$\tilde{n}$o-Southern Oscillation (ENSO)에 의한 대규모 대기순환 패턴의 변화가 한강 유역의 통합위험지수 변화에 미치는 영향을 평가하였다. ENSO자료는 전통적인 El Ni$\tilde{n}$o에 해당하는 Cold-tongue (CT) El Ni$\tilde{n}$o와 중앙태평양 부근의 이상적인 해수면 온도 상승에 의한 Warm-pool (WP) El Ni$\tilde{n}$o, 그리고 해수면 온도가 이상적으로 낮게 관측되는 La Ni$\tilde{n}$a 기간으로 구분하였으며, 각 기간 중 가장 강한 ENSO가 발생한 해(CT El Ni$\tilde{n}$o, 1998; WP El Ni$\tilde{n}$o, 2005; La Ni$\tilde{n}$a, 2000)를 대상으로 통합위험지수를 산정하였다. 통합위험지수는 수문학적 요인(Hydrologic Components), 사회 경제적 요인(Socio-Economic Components)과 생태적 요인(Ecological Components)으로 구분하였고, 엔트로피(entropy) 기법을 통하여 각 인자와 요인별 가중치를 적용하였다. 중권역별 통합위험지수의 평가는 5개의 계급구간(Very High, High, Medium, Low, Very Low)으로 구분하였다. 분석결과, CT El Ni$\tilde{n}$o해의 유역평균 IRI 값은 0.58, WP El Ni$\tilde{n}$o해의 IRI 값은 0.57로 비슷한 결과를 보였으나, La Ni$\tilde{n}$a해에는 IRI 값이 0.41로 낮게 나타났다. CT와 WP El Ni$\tilde{n}$o해에는 한강 서쪽일부 중권역에서 통합위험지수가 높게 나타났으며, La Ni$\tilde{n}$a해에는 한강 중 동부 대부분 유역에서 낮게 분석되었다. 향후 유역별 통합위험지수 산정과 더불어 서로 다른 형태의 ENSO에 따른 수자원 변동 예측이 이루어진다면, 수자원의 효율적인 관리와 안정적인 용수공급에 도움을 줄 것으로 사료되며, 이는 유역별 수자원의 취약성 평가 및 위험도 분석을 위한 기초자료로 활용이 가능하리라 사료된다.

• Korean Journal of Soil Science and Fertilizer
• /
• 제44권4호
• /
• pp.527-533
• /
• 2011

Decomposition of compost applied to soils is affected basically by its biological stability; but, many other chemical properties of the compost may also influence compost organic-C mineralization. This study was conducted to investigate the principal substrate quality factors of composts that determine C mineralization of compost with similar stability degree (SD). Three composts samples with similar SD but different chemical properties such as pH, C/N, $K_2SO_4$-extractable C, and molar ratio of $NH_4^+$ to $NO_3^-$ were mixed with an acid loamy soil and $CO_2$ emission was monitored during the laboratory incubation for 100 days. Temporal pattern of cumulative compost organic-C mineralization expressed as % of total organic C ($C_{%\;TOC}$) followed double exponential first order kinetics model and the $C_{%\;TOC}$ ranged from 4.8 to 11.8% at the end of incubation. The pattern of C%TOC among the composts was not coincident with the SD pattern (40.1 to 58.6%) of the composts; e.g. compost with the lowest SD resulted in the least $C_{%\;TOC}$ and vice versa. This result indicates that SD of compost can not serve as a concrete predictor of compost mineralization as SD is subject not only to maturity of compost but also to characteristics of co-composting materials such as rice hull (low SD) and sawdust (high SD). Meanwhile, such pattern of $C_{%\;TOC}$ collaborated with pH, C/N, $K_2SO_4$-extractable C, and molar ratio of $NH_4^+$ to $NO_3^-$ of the composts that are regarded as chemical indices of the progress of composting. Therefore, for better prediction of compost mineralization in soils, it is necessary to consider both SD and other chemical indices (pH, C/N, and molar ratio of $NH_4^+$ to $NO_3^-$).

• Journal of Korean Society of Transportation
• /
• 제24권5호
• /
• pp.45-56
• /
• 2006

In order to construct an information pool on the production characteristics and efficiency of Korean railroad industry, various alternative approaches have to be applied. In this paper we present an empirical application of the distance function to measure the technical efficiency and the production characteristics of Korean railroad industry, The distance function firstly introduced by Shephard (1953) provides the advantage that it does not need information about prices, so it can accommodate the multiple output nature of the railway only using the quantifies as data. This is of great relevance in the context of the public sector such as railroad industry where there are often distinct control mechanisms on input prices. Also the distance function allows us to obtain a measure of technical efficiency as well as a measure of production characteristics. From annual data on Korean railroad industry during 1964-2004, multiple output distance function is estimated using quadratic programming model. The resulting technical efficiency estimates has tended to be improved over the period $1980{\sim}2004$. The indirect Morishima elasticities of substitution indicate that the substitutabilities for labor are relatively very low or impossible. The average scale elasticity is 2.7 which means that increasing the scale by 1per cent will result in an output increase by 2.7 percent. This result indicates that economies of scale are present in the Korean railroad industry.

• Journal of Plant Biotechnology
• /
• 제41권4호
• /
• pp.194-200
• /
• 2014

Monodehydroascorbate reductase (MDHAR) is an important enzyme that plays a role in the detoxification of reactive oxygen species (ROS) by maintaining reduced pool of ascorbate through recycling the oxidized form of ascorbate. In this study, we isolated a PagMDHAR1 gene from Populus alba ${\times}$ P. glandulosa, and investigated its expression characteristics. The PagMDHAR1 cDNA encodes a putative 434 amino acids containing FAD- and NAD(P)H-binding domains. Southern blot analysis indicated that a single nuclear gene encodes this enzyme. Northern hybridization analysis revealed that PagMDHAR1 is highly expressed in both suspension cells and flower tissues, while its expression levels were enhanced by drought, salt, cold, wounding and ABA. Therefore, PagMDHAR1 might be expressed in response to abiotic stress through the ABA-mediated signaling pathway in this poplar species, suggesting that the PagMDHAR1 plays an important role in the defense mechanisms against oxidative stress.

• Molecules and Cells
• /
• 제28권5호
• /
• pp.423-430
• /
• 2009

In order to elucidate the precise phylogenetic relationships of Korean wild boar (Sus scrofa coreanus), a partial mtDNA D-loop region (1,274 bp, NC_000845 nucleotide positions 16576-1236) was sequenced among 56 Korean wild boars. In total, 25 haplotypes were identified and classified into four distinct subgroups (K1 to K4) based on Bayesian phylogenetic analysis using Markov chain Monte Carlo methods. An extended analysis, adding 139 wild boars sampled worldwide, confirmed that Korean wild boars clearly belong to the Asian wild boar cluster. Unexpectedly, the Myanmarese/Thai wild boar population was detected on the same branch as Korean wild boar subgroups K3 and K4. A parsimonious median-joining network analysis including all Asian wild boar haplotypes again revealed four maternal lineages of Korean wild boars, which corresponded to the four Korean wild boar subgroups identified previously. In an additional analysis, we supplemented the Asian wild boar network with 34 Korean and Chinese domestic pig haplotypes. We found only one haplotype, C31, that was shared by Chinese wild, Chinese domestic and Korean domestic pigs. In contrast to our expectation that Korean wild boars contributed to the gene pool of Korean native pigs, these data clearly suggest that Korean native pigs would be introduced from China after domestication from Chinese wild boars.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제17권10호
• /
• pp.34-38
• /
• 2016

This study aims to develop qualification criteria for training and establishing an expert pool of 3D printing operation experts and 3D printing development specialists in the emerging 3D printing industry. We investigate the domestic and international 3D printing industry, as well as 3D printing- related training institutions and quantity of test examinees. Utilizing competency analysis, this study examines the competencies and educational content of both 3D printing operation expert as well as 3D printing development specialists. In addition, a survey was conducted on the issue of institutionalization of qualification criteria for 3D printing operation expert and 3D printer development specialists. This study further proposes evaluation methods for qualification criteria for both 3D printing operation expert and 3D printer development specialists based on simulations of both written and performance tests. Based on the findings, this study proposes instructional program outlines as well as comprehensive guidelines for training and qualification processes for 3D printing operation expert and 3D printer development specialists.

• Journal of Ocean Engineering and Technology
• /
• 제30권4호
• /
• pp.334-340
• /
• 2016

The combustion chamber of a diesel engine is often exposed to a more serious wear and corrosion environment than other parts of the engine because its temperature increases as a result of using heavy oil of low quality. Therefore, repair and built-up welding methods must be performed on worn or corroded parts of the piston crown, exhaust valve, etc. from an economical point of view. In this study, Inconel 718 filler metal was used in repair welding on the groove of a forged steel specimen for a piston crown, along with built-up welding on the surface of another forged steel specimen. Then, the corrosion characteristics of the weld metal zone for the repair welding and the deposited metal zone for the built-up welding were investigated using electrochemical methods in a 35% H₂SO₄ solution. The deposited metal zone indicated better corrosion resistance than the weld metal zone, showing a nobler corrosion potential, higher impedance, and smaller corrosion current density. It is considered that metal elements with good corrosion resistance were generally included in the filler metal, and these elements were also greatly involved in the deposited meta by built-up welding, whereas the weld metal consisted of metal elements mixed with both the filler metal and base metal elements because of the molten pool produced by the repair welding. Finally, it is considered that the hardness of the weld metal was increased by the repair welding, whereas the built-up welding improved the corrosion resistance of the deposited metal.