• 한국해안·해양공학회논문집
• /
• 제21권1호
• /
• pp.63-78
• /
• 2009

본 논문에서는 천해에 적용 가능한 동적결합형 태풍 해일-조석-파랑 수치모델의 개발과 개발된 모델의 정확성을 검증하였다. 태풍 해일과 조석 수치모델은 POM (Princeton Ocean Model)을 기반으로 하였으며, 풍파 파랑 수치모델은 WAM (Wave Model)을 기반으로 천해에 적용할 수 있도록 수정하여 두 모델을 동적으로 결합하였다. 연속된 두 개의 논문 중에 첫 번째 논문인 본 논문에서는 해일과 조석을 수치 모의하는 해수유동 부분의 수치모의의 안정성과 정확성을 검증하였다. 수치모의의 안정성과 정확성 향상을 위하여 기존의 POM 모델의 난류 수치모델 부분과 연직속도 계산 알고리즘을 수정 보완하였다. 수정된 POM 모델의 정확성과 수치적 안정성 검증을 위하여 해석해와 실 해역에서 측정된 관측결과와 비교하였으며, 수정된 POM 모델이 기존의 POM 모델보다 수치계산의 안정성과 정확성이 개선되었음을 확인할 수 있었다.

• 한국유변학회:학술대회논문집
• /
• 한국유변학회 2001년도 Australian-Korean Rheology Conference 2001
• /
• pp.156.2-156
• /
• 2001

(No abstract, see full-text)

• Ocean and Polar Research
• /
• 제23권2호
• /
• pp.161-172
• /
• 2001

A model-to-model comparison is attempted between Princeton Ocean Model (POM) and Miami Isopycnic Coordinate Ocean Model (MICOM) as a first step to extend our knowledge of models' performances in studying the East Sea circulation. The two models have fundamentally different numerical schemes and boundary conditions imposed on these models are not exactly the same each other. This study indicates that MICOM has a critical weak point in that it does not reproduce the shallow surface currents properly while it handles the thermohaline processes and associated movements of intermediate and deep waters efficiently. It is suggested that the mixed layer scheme needs to be modified so that it can match with inflow boundary conditions in order to reproduce the surface currents properly in MICOM. POM reproduces the surface current pattern better than MICOM, although the surface currents in POM appear to undergo the unrealistic seasonal variation and have exaggeratedly large vertical scale. These defects seem to arise during the process of adapting POM to the East Sea, and removing these defects is left as a future task.

• Membrane and Water Treatment
• /
• 제12권1호
• /
• pp.23-35
• /
• 2021

A POM-membrane was fabricated by immobilizing a keggin type polyoxometalate (POM) H5PV2Mo10O40 onto the surface of microporous flat-sheet polymeric polyvinylidene fluoride (PVFD) membrane using a chemical deposition method. The POM-membrane was characterized by FT-IR, SEM and EDX to confirm existing of the POM onto the membrane surface. The POM-membrane was used to remove an anionic textile dye (Reactive Black 5 named as an RB5) from aqueous phases with a cross-flow membrane filtration and a batch adsorption system. The dye removal efficiency of the POM-membrane using the cross-flow membrane filtration system and the batch adsorption system was about 88% and 98%, respectively. The influence factors such as contact time, adsorbent dosage, pH, and initial dye concentration were investigated to understand the adsorption mechanism of the RB5 dye onto the POM-membrane. To find the best fitting isotherm model, Langmuir, Freundlich, BET and Harkins-Jura isotherm models were used to analyze the experimental data. The isotherm analysis showed that the Langmuir isotherm model was found to the best fit for the adsorption data (R2 = 0.9982, qmax = 24.87 mg/g). Also, adsorption kinetic models showed the pseudo second order kinetic model was found the best model to fit the experimental data (R2 = 0.9989, q = 8.29 mg/g, C0 = 15 ppm). Moreover, after four times regeneration with HNO3 acid, the POM-membrane showed high regenerability without losing dye adsorption capacity.

• Korea-Australia Rheology Journal
• /
• 제18권1호
• /
• pp.9-14
• /
• 2006

We show that some network and pom-pom constitutive models are essentially the same. Instead of the usual confrontation, we suggest that the two approaches can offer useful mutual support: vital information about network destruction rates found from detailed pom-pom calculations can be used to improve the network models, while deductions about network creation rates can pinpoint areas needing further attention in the tube modelling area. A new form of the PTT model, the PTT-X model, results in improved shear and elongational flow descriptions, plus an improved recoil behaviour. The remaining problems of strain-time separation, second normal stress difference description, and reduction of parameters are also discussed and some suggestions for progress are offered.

• 한국해안해양공학회지
• /
• 제18권3호
• /
• pp.198-210
• /
• 2006

본 연구에서 이용한 3차원 유동모델인 POM(Princeton Ocean Model)은 저층수의 거동예측에 유리한 ${\sigma}$ 좌표계를 채용하고 있는 모델로서 범용성이 높고, 해양유동모델로서 개발되었지만 최근에는 연안역에서의 적용 예(박경 등, 1998)도 증가하고 있다. 기존의 POM은 ${\sigma}$좌표계 모델의 좌표변환에 기인한 수치오차에 대한 보정을 실시하지 않은 모델로서, 이러한 수치오차를 축소시키는 것은 저층부근의 유속의 정도향상에 매우 중요하지만 오차의 축소를 시도하지 않고 그대로 적용하고 있는 실정이다. 따라서, 본 연구에서는 $Sl{\Phi}rdal$(1997)이 제안한 방법을 이용하여 오차보정을 통한 3차원 유동모델인 POM의 정도향상을 실시하였다. 구축된 모델을 이용하여 우리나라의 대표적인 기수호중 하나인 영랑호에 적용하여 저층수의 거동을 파악하고 빈산소수괴를 포함한 저층수의 거동 및 형성기구를 명확히 할 수 있는 자료로서 활용하고자 하였다. 적용결과, 기존 POM모델과 비교하여 개량형 POM모델을 이용하였을 경우 수역에서의 저층수의 거동재현에 있어서 더욱 효과가 있음을 볼 수 있었다.

• 한국해안해양공학회지
• /
• 제12권2호
• /
• pp.70-80
• /
• 2000

Princeton Ocean Model(POM)에서 지배방정식을 반음해법으로 차분화하여 mode splitting을 제거하고 조간대 처리기법을 도입한 3차원 semi-implicit 모델을 수립하였다 운동방정식의 순압경도력항과 수직방향 와동점 성향, 그리고 수심적분된 연속방정식의 속도발산항을 음해법으로 처리하여 빠르게 움직이는 표면중력파가 야기하는 수치안정조건을 제거하여 더 큰 time step을 사용할 수 있는 semi-implicit 모델을 수립하였다 수립한 3차원 semi-implicit 모델의 유효성과 계산휴율을 확인하기 위하여 이상적인 3차원 수로에 적용한 결과 semi-implicit 모델이 POM과 같은 결과를 주었으나 POM보다 약 4,.4배 정도 빠르게 수행되어 향상된 계산효율을 보여주었다. mode splitting 기법을 사용하는 POM의 유속 결과는 조간대에서 발생한 noise가주 수로에까지 전파되어 불안정 한 결과를 준 반면에 semi-implicit 모델결과는 더 큰 time step을 사용함에도 불구하고 조간대와 주 수로 모두에서 noiserk 없는 안정된 결과를 주었다 3차원 semi-implicit 모델의 현장 적용성을 확인하기 위하여 경기만에 적용한 결과 semi-implicit 모델이 모델 영역 전반에 걸쳐 관측된 조석 및 조류의 크기 및 전파양상을 잘 재현하였다.

• 대한치과보철학회지
• /
• 제34권1호
• /
• pp.31-69
• /
• 1996

The purpose of this investigation was to analyze stress distribution in implant supporting tissue according to different types of attachments such as combination bar attachment, Hader bar attachment, O-Ring attachment and Dal-Ro attachment that are used in mandibular overdenture by using two osseointegrated implants, to study the influence that POM IMC used in bar type attachment has in implant supporting tissue and compare the preceding analyses to find out an effective stress distribution method. Three dimensional photoelastic method was used to obtain the following results. (A) Analysis of stress distribution according to attachment type 1. Under vertical load condition, compressive stress was seen at implant supporting area of working side on all the photoelastic models but in Hader bar attachment tensional stress was seen at distal upper area of implant supporting area. Relatively Hader bar and O-Ring attachment showed even stress distribution pattern. 2. Under vertical load condition, compressive stress at implant apex area and tensional stress at implant lateral supporting area were seen at nonworking side of all models. 3. Under $25^{\circ}$ lateral load condition, general compressive stress was seen at working side implant supporting area in most of the models, especially at distal upper supporting area higher compressive stress concentration was seen in combination bar attachment and tensional stress concentration, in Hader bar attachment. 4. Under $25^{\circ}$ lateral load condition, compressive stress at implant apex area and tensional stress at implant lateral supporting area were seen at nonworking side of all models, except O-Ring model which showed compressive stress only. (B) Influence of POM IMC to stress distribution in bar type attachment 5. Under vertical load condition, better stress distribution pattern was seen at working side of combination bar and Hader bar attachment model using POM IMC. 6. Under vertical load condition, stress value was increased at nonworking side of combination bar attachment model using POM IMC and tendency of increasing compression was seen at nonworking side of Hader bar attachment model using POM IMC. 7. Under $25^{\circ}$ lateral load condition, better stress distribution pattern was seen at working side of combination bar attachment model using POM IMC but tendency of increasing stress was seen on working side of Hader bar attachment model using POM IMC. 8. Under $25^{\circ}$ lateral load condition, stress reduction was seen at nonworking side of combination bar attachment model using POM IMC but tendency of increasing stress was seen at nonworking side of Hader bar attachment model using POM IMC.

• 한국해양공학회지
• /
• 제24권3호
• /
• pp.31-37
• /
• 2010

During typhoon periods, coastal regions are often directly flooded by typhoon-surges. There are also many cases where coastal regions are inundated by river inundations or dam breaks. However, most studies on coastal flooding by typhoons have been restricted to cases involving the sea. Flooding by river inundation has been excluded in those studies. Usually ocean numerical models are not applied to river flow because the governing equations for ocean flow and river flow are not the same. For a coastal flooding simulation with river inundation, POM, the three-dimensional numerical ocean model, was applied to the popular river flow problems, dam-break problem, and flows over a spillway. The simulated results showed good agreement with other numerical simulations and measured data, suggesting the possibility of using POM in coastal flooding simulations involving direct coastal surges and river inundations.

• 한국해안·해양공학회논문집
• /
• 제21권1호
• /
• pp.79-90
• /
• 2009

본 논문에서는 심해부터 천해에 까지 적용가능한 동적결합형 태풍 해일-조석-파랑 수치모델을 태풍 매미에 적용하여 모델의 안정성과 정확성을 검증하였다. 동적결합형 모델은 해수유동 모델인 POM을 수정한 모듈과 심해 풍파모델인 WAM을 심해부터 천해까지 적용가능하도록 수정한 모듈로 구성되어 있다. 수정 POM 모듈에서 조위, 조류 와 해일을 계산하며, 수정 WAM 모듈에서 풍파를 계산하여 상호 계산된 결과를 주고 받도록 결합된 동적결합형 모델이다. 수정 WAM 모듈에서는 잉여응력과 바람에 의한 마찰응력, 해수면 조도계수 등의 계산결과가 POM으로 제공되며 수정 POM 모듈에서는 유속, 조위면 등의 정보가 WAM으로 제공된다. 개발된 수치모델을 태풍 매미에 적용하여 계산된 결과를 관측된 파랑 및 조위자료와 비교하여 정확성을 검증하였다.