• 한국환경과학회지
• /
• 제16권8호
• /
• pp.891-896
• /
• 2007

Waterborne polyurethane dispersions (WPUD) were prepared by poly(ethylene glycol) adipate as the polyester type, ${\alpha},{\omega}-hydroxyalkyl$ terminated polydimethylsiloxane (PDMS-diol) as the polysiloxane type, hexamethylene diisocyanate, and isophorone diisocyanate, dimethylol propionic acid. The effects of PDMS-diol contents on the particle size, thermal and surface properties of WPUD were investigated. The structures of the synthesized WPUD were confirmed using by FT-IR. The surface, thermal and mechanical properties were investigated by measuring the contact angles, DSC, TGA and UTM. As PDMS-diol contents increased, the particle size, the contact angle, and the elongation was increased, while the tensile strength was decreased. Also the thermal stabilities of the synthesised WPUD were increased as PDMS-diol contents increased.

• Elastomers and Composites
• /
• 제54권4호
• /
• pp.271-278
• /
• 2019

Polyurethane elastomers (PUEs) were synthesized using trans-1,4-bis(isocyanatomethyl) cyclohexane (1,4-H₆XDI), poly(oxytetramethylene) glycol, 1,4-butanediol (BD), and 1,1,1-trimethylol propane (TMP). To control the molecular aggregation state and mechanical properties of these PUEs, hard segment contents of 20 and 30 wt% and BD/TMP ratios of 10/0 and 8/2 were chosen. Differential scanning calorimetry and small-angle X-ray scattering measurements revealed that the degree of microphase separation increased with an increase in both hard segment content and BD ratio. The Young's modulus and strain at break of the 1,4-H₆XDI-based PUE were 6-20 MPa and 5-15, respectively. Incorporation of 20% TMP as a cross-linking agent into BD increased the melting temperature of the hard segment chains, that is, heat resistance, and decreased the Young's modulus. This could be due to the low density of the physical cross-linking network and the dispersion of hard segment chains in the soft segment matrix in the PUE in the presence of 20% TMP.

• Elastomers and Composites
• /
• 제58권3호
• /
• pp.112-120
• /
• 2023

Herein, we propose a facile water-processible method to develop an eggshell membrane (ESM)-embedded waterborne polyurethane (WPU)-based bio-degradable and bio-compatible coating material that exhibits attractive tactile properties. Virgin ESM is not dispersible in water. Hence, to develop the ESM-based WPU composite, soluble ESM (S-ESM) was first extracted by de-crosslinking the ESM. The extracted S-ESM at different concentrations (0, 0.5, 1.0, 1.5 wt %) was mixed with WPU. Compared to virgin WPU, the viscosity of S-ESM/WPU dispersion and the in-plane coefficient of friction (COF) of the composite film surfaces decreased with an increase in the S-ESM content. In addition, an increase in the S-ESM content improved the tribo-positive characteristics of the film. Different good touch-feeling biomaterials, such as fur, feather, and human skin exhibit tribo-positivity. Thus, the enhanced tribo-positive characteristics of the S-ESM/WPU and the decrease in their COF owing to an increase in the S-ESM content imply the enhancement of its touch-feeling performance. The S-ESM embedded WPU composites have potential applications as coating materials in various fields, including automobile interiors and artificial leather.

• Elastomers and Composites
• /
• 제29권3호
• /
• pp.226-233
• /
• 1994

The properties of the mixed prepolymer-urethane in the range of 10-40 phr were observed. LBR and LCR have same functional group but different in structure of molecular. The viscosity of mixture depending on content of rubber, adhesive strength, thermal property and compatibility with a diluted solvent are as follows: 1. The viscosity of the mixture was influenced by solubility of the diluent for urethane resin and liquid rubber. 2. Adhesive strength showed the highest value at 30phr rubber, decreased gradually at above 30phr rubber. And LBR revealed better physical property than that of LCR. 3. The most effective factors affecting adhesive strength are molecular structure of rubber, the type of solvent, and volatility. 4. Urethane resin containing LBR showed better compatibility for solvent and faster drying velocity. 5. LBR showed more favorable compatibility and dispersion state than those of LCR by analyzing the results of SEM.

• 한국염색가공학회지
• /
• 제31권4호
• /
• pp.258-267
• /
• 2019

Synthetic suede without PFCs(perfluorinated compounds) are followed by subsequent high temperature treatment. But migration fastness of synthetic suede may be reduced due to sublimation of disperse dyes that results from the high temperature treatment. Therefore, in this study, chitosan treatment was used to improve the migration fastness before polyurethane dipping process. Polyester fiber was treated with sodium hydroxide aqueous solution before chitosan processing. This samples treated with a chitosan concentration upto 0.5% were dyed and coated with PUD(polyurethane dispersion). The migration fastness was most improved at 0.35% application. This is presumably due to the fact that the chitosan may increase the dye-binding capability through intermolecular hydrogen bonding.

• 한국응용과학기술학회지
• /
• 제39권6호
• /
• pp.924-931
• /
• 2022

Undenatured castor oil and trimethylolpropane (TMP) were used to obtain bio-based water-based polyurethane. Isophorone diisocyanate (IPDI) was incorporated into the formulation to obtain a transparent film, and ethylenediamine (EDA) was used for chain extension. In order to measure the change in physical properties according to the contents of castor oil and TMP, each tensile strength, elongation, and abrasion resistance test was conducted. As the contents of castor oil and TMP increased, the tensile strength increased, the elongation decreased, and the surface hardened strongly as the respective contents increased.

• 한국염색가공학회지
• /
• 제25권1호
• /
• pp.37-46
• /
• 2013

This paper surveys the ESD characteristics of the PANI added PU/MWNT film according to the manufacturing conditions such as variation of the loading contents of PANI and the mixture ratio of 2 dispersion solutions. For this purpose, PANI added PU/MWNT ground films were made with IPA/MWNT 3wt% dispersion solution and PANI/DMF dispersion solutions(5, 10, 15, 20, 25, and 30wt% contents of the PANI) by the mixture ratio of dispersion solution(10/50, 20/40, 30/30, 40/20, and 50/10part) in the PU (972DF) 100g, which was treated with 500rpm for 30min in the stirrer with condition of the dry temperature $120^{\circ}C$ for 2min. Totally, 36 kinds of PANI added PU/MWNT film specimens were prepared. The physical properties of the PANI added PU/MWNT films such as electrical resistivity, absorbancy by UV-Vis spectrometer, and triboelectricity were measured and discussed with surface characteristics of the PANI added PU/MWNT films by SEM. The dispersion property of PANI to the DMF showed best dispersion at the 25% of PANI content. The surface electrical resistivity of the PANI added PU/MWNT films was decreased with increasing the weight content of PANI/DMF dispersion solution, and it showed the lowest value $10^6{\Omega}$ at the mixing condition of PANI/DMF 20part and MWNT/IPA 40part with 30% PANI. Furthermore, it was shown that the electrical and physical properties of the PANI added PU/MWNT film such as electrical resistivity, and triboelectricity were better than those of PU/MWNT film prepared with no PANI, which was result obtained in previous paper.

• 한국자기학회지
• /
• 제6권1호
• /
• pp.28-35
• /
• 1996

자기 테이프 제조용 초미립 자성 철 분말의 분산 거동을 파악하기 위하여 vinyl계 바이더, polyurethane 바인더, 윤활제등 첨가제 종류 및 양에 따른 분산 거동 및 물리특성들을 조사하였다. 분산성은 바인더의 funtional group의 종류, 자성체와 바인더의 비율등에 크게 영향을 받았으며 적정 조건의 선택으로 분산성은 종래보다 20% 증가하 였다. 이에 따라 자기 특성중 포화 자화는 종래의 경우보다 200 Gauss 증가하였으며, 전자 변환 특성중 휘도 S/N (signal to noise ratio)은 2dB 증가하였다. 적절한 윤활제의 종류및 양에 따라 tape의 마찰계수는 0.15 감소하였으며, 이에 따라 tape의 내구성중 휘도 S/N 열화특성이 4dB 이상 향상되었다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.133-134
• /
• 2006

In contrast to paints, the surface appearance of adhesive materials is of minor importance, because the adhesive is invisible between the two substrates. Therefore, the rheological properties needed to apply an adhesive dispersion by spray coating can be quite different. The influence of three different kinds of thickeners on the spraying behaviour of polyurethane adhesive dispersions was investigated. The associative thickener showed only minor changes, whereas the higher molecular weight soluble thickeners dramatically changed the spraying angle and the amount of overspray. Determination of the elongational viscosity by means of the CaBER rheometer proved to be of limited use for thickened dispersions.

• 한국응용과학기술학회지
• /
• 제35권2호
• /
• pp.463-471
• /
• 2018

본 연구에서는 polypropylene glycol(PPG)을 이용한 수분산 폴리우레탄에 카제인을 그래프트 합성한 다음 카본블랙을 분산하여 발생하는 변화를 분석하였다. 이를 위해 카제인을 그래프트한 수분산 폴리우레탄 (PUD와 CPUD's) 시료를 준비한뒤 카본블랙이 분산된 CPCB's 시료를 준비하였다. 준비된 시료를 이용하여 인장강도를 측정 한 결과 카제인이 높게 함유된 CPUD3가 $3.01kg_f/mm^2$로 인장강도가 증가하였으며, CPCB's에서는 카본 블랙이 증가할수록 인장강도가 $2.54kg_f/mm^2$ 로 낮게 측정되었다. 연신율은 카제인이 적게 함유된 PUD 시료가 278 %로 측정되었으며, CPCB's에서는 CP3CB4가 157%로 측정되었다. 내마모성은 CPUD3 시료가 36.97 mg.loss, CP3CB4가 41.11 mg.loss로 표면 강도가 측정되었다. 내용제성은 PUD's 시료와 CPCB's 시료 양쪽 모두 물성변화가 없음을 확인 할 수 있었다.