• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.3
• /
• pp.306-311
• /
• 2016

Software reliability in the software development process is an important issue. Infinite failure NHPP software reliability models presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this paper, reliability software cost model considering logarithmic and exponential fault detection rate based on observations from the process of software product testing was studied. Adding new fault probability using the Goel-Okumoto model that is widely used in the field of reliability problems presented. When correcting or modifying the software, finite failure non-homogeneous Poisson process model. For analysis of software reliability model considering the time-dependent fault detection rate, the parameters estimation using maximum likelihood estimation of inter-failure time data was made. The logarithmic and exponential fault detection model is also efficient in terms of reliability because it (the coefficient of determination is 80% or more) in the field of the conventional model can be used as an alternative could be confirmed. From this paper, the software developers have to consider life distribution by prior knowledge of the software to identify failure modes which can be able to help.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.370-376
• /
• 2020

In this study, we consider a group-based random access method for group connection and delivery by grouping devices when H2H devices and large-scale M2M devices coexist in a cell in NB-IoT environment. H2H devices perform individual random access, but M2M devices are grouped according to a NPRACH transmission period, and a leader of each group performs random access. The preamble is allocated using the variable preamble allocation algorithm of the Disjoint Allocation(DA) method. The proposed preamble allocation algorithm is an algorithm that preferentially allocates preambles that maximizes throughput of H2H to H2H devices and allocates the rest to M2M devices. The access distribution of H2H and M2M devices was set as Poisson distribution and Beta distribution, respectively, and throughput, collision probability and resource utilization were analyzed. As the random access transmission slot is repeated, the proposed preamble allocation algorithm decreases the collision probability from 0.93 to 0.83 and 0.79 when the number M2M device groups are 150. In addition, it was found that the amount of increase decreased to 33.7[%], 44.9[%], and 48.6[%] of resource used.

• Restorative Dentistry and Endodontics
• /
• v.25 no.1
• /
• pp.91-108
• /
• 2000

Most of cervical abrasion and erosion lesions show gingival margin where the cavosurface angle is on cementum or dentin. Composite resin restoration of cervical lesion shrink toward enamel margin due to polymerization contraction. This shrinkage has clinical problem such as microleakage and secondary caries. Several methods to diminish contraction stress of composite resin restoration, such as modifying cavity form and building up restorations in several increments have been attempted. The purpose of this study was to compare polymerization contraction stress of composite resin in Class V cavity subjected to cavity forms and placement methods. In this study, finite element model of 5 types of Class V cavity was developed on computer tomogram of maxillary central incisor. The types are : 1) Box cavity 2) Box cavity with incisal bevel 3) V shape cavity 4) V shape cavity with incisal bevel 5) Saucer shape cavity. The placement methods are 1) Incisal first oblique incremental curing 2) Bulk curing. An FEM based program for light activated polymerization is not available. For simulation of curing dynamics, time dependent transient thermal conduction analysis was conducted on each cavity and each placement method. For simulation of polymerization shrinkage, thermal stress analysis was performed with each cavity and each placement method. The time-temperature dependent volume shrinkage rate, elastic modulus, and Poisson's ratio were determined in thermal conduction data. The results were as follows : 1. With all five Class V cavifies, the highest Von Mises stress at the composite-tooth interface occurred at gingival margin. 2. With box cavity, V shape cavity and saucer cavity, Von Mises stress at gingival margin of V shape cavity was lower than the others. And that of box cavity was lower than that of saucer cavity. 3. Preparing bevel at incisal cavosurface margin decreased the rate of stress development in early polymerization stage. 4. Preparing bevel at incisal cavosurface margin of V shape cavity increased the Von Mises stress at gingival margin, but decreased at incisal margin. 5. At incisal margin, stress development by bulk curing method was rapid at early stage. Stress development by first increment of incremental curing method was also rapid but lower than that by bulk curing method, however after second increment curing final stress was the same for two placement methods. 6. At gingival margin, stress development by incremental curing method was suddenly rapid at early stage of second increment curing, but final stress was the same for two placement methods.

• Tunnel and Underground Space
• /
• v.30 no.2
• /
• pp.164-179
• /
• 2020

Applying the limit state design method to geotechnical structures, accuracy and reliability of its design are mainly affected by parameters for geotechnical site characteristics, such as unit weight, Poisson's ratio, deformation modulus, cohesion and frictional angle. When the structures are located in weathered ground, especially, cohesion and frictional angle of ground are closely related with decision of parameters for structures' load and ground's resistance. Therefore, the accurate determination of these parameters, which are commonly obtained from field measurement, such as borehole shear test, are essential for optimum design of geotechnical structures. The 38 case studies, in this study, have been analyzed for understanding the importance of these parameters in designing the ground structures. From these results, importance of field measurement was also ascertained. With these evaluations, an apparatus for determining the strength characteristics, which are fundamental in limit state design (LSD) method, have been newly developed. This apparatus has an improved function as following the ASTM suggestion. Through the field application of this apparatus, the strong point of minimizing the possibility of error occurrence during the measurement has been verified and authors summarized that the essential parameters for LSD can be qualitatively obtained by this apparatus for determination of strength characteristics of weathered ground.

• Journal of Korean Society of Transportation
• /
• v.33 no.6
• /
• pp.554-563
• /
• 2015

This study dealt with developing an accident model for rural signalized intersections with random parameter negative binomial method. The limitation of previous count models(especially, Poisson/Negative Binomial model) is not to explain the integrated variations in terms of time and the distinctive characters a specific point/segment has. This drawback of the traditional count models results in the underestimation of the standard error(t-value inflation) of the derived coefficient and finally affects the low-reliability of the whole model. To solve this problem, this study improves the limitation of traditional count models by suggesting the use of random parameter which takes account of heterogeneity of each point/segment. Through the analyses, it was found that the increase of traffic flow and pedestrian facilities on minor streets had positive effects on the increase of traffic accidents. Left turning lanes and median on major streets reduced the number of accidents. The analysis results show that the random parameter modeling is an effective method for investigating the influence on traffic accident from road geometries. However, this study could not analyze the effects of sequential changes of driving conditions including geometries and safety facilities.

• Journal of Korean Society of Transportation
• /
• v.26 no.4
• /
• pp.99-110
• /
• 2008

It is commonly estimated that there is a much higher potential for accidents at a crossroads than along a single road due to its plethora of conflicting points. According to the 2006 figures by the National Police Agency, the number of traffic accidents at crossroads is greatly increasing compared to that along single roads. Among others, crossroads installed with traffic signals have more varied influential factors for traffic accidents and leave much more room for improvement than ones without traffic signals; thus, it is expected that a noticeable effect could be achieved in safety if proper counter-measures against the hazards at a crossroads were taken together with an estimate of causes for accidents This research managed to develop models for accident forecasts and accident intensity by applying data on accident history and site inspection of crossroads, targeting four selected downtown crossroads installed with traffic signals. The research was done by roughly dividing the process into four stages: first, analyze the accident model examined before; second, select variables affecting traffic accidents; third, develop a model for traffic accident forecasting by using a statistics-based methodology; and fourth, carry out the verification process of the models.

• Journal of Korean Society of Transportation
• /
• v.30 no.6
• /
• pp.93-102
• /
• 2012

The frequency and severity of traffic accidents related to signalized intersections in urban areas have been more serious than those in both arterial segments and crosswalks. Especially, traffic accidents involved with injuries and fatalities have caused by traffic signal violations within intersections. Therefore, many countries including Korea have installed the red light enforcement camera (RLE) to reduce traffic accidents associated with the traffic signal violation. Meanwhile, many methodologies have been studied in terms of safety impacts estimation of red light enforcement, which, however, cannot be easy to conduct. In this study, safety impacts was estimated for intersections of Chicago downtown area using SPF models and EB approach. As a result, for all crash types and target traffic accident types such as "angle", "rear end", "sideswipe in the same and other directions", "turn", and "head on", fatal crashes were reduced by 26% and 38%. However, RLE may increase property-demage-only-crashes by 3.23% and 1.16%, respectively.

• Journal of Korean Society of Transportation
• /
• v.30 no.6
• /
• pp.37-46
• /
• 2012

The number of traffic accidents caused by elderly drivers over the age of 65 has surged over the past ten years from 37,000 to 274,000 cases. The proportion of elderly drivers' accidents has jumped 3.1 times from 1.2% to 3.7% out of all traffic accidents, and traffic safety organizations are pursuing diverse measures to address the situation. Above all, connecting safety measures with an in-depth research on behavioral and physical characteristics of elderly drivers will prove vital. This study conducted an empirical research linking the driving characteristics and traffic accidents by elderly drivers based on the Driving Aptitude Test items and traffic accident data, which enabled the measurement of behavioral characteristics of elderly drivers. In developing the Influence Model, we applied the zero-inflated Poisson (ZIP) regression model and selected an accident prediction model based on the Bayesian Influence in regards to the ZIP regression model and the zero-inflated negative binomial (ZINB) regression model. According to the results of the AAE analysis, the ZIP regression model was more appropriate and it was found that three variables? prediction of velocity, diversion, and cognitive ability? had a relation of influence with traffic accidents caused by elderly drivers.

• Journal of Korean Society of Transportation
• /
• v.28 no.2
• /
• pp.123-133
• /
• 2010

The national standards for the installation of pedestrian crosswalks prohibits installation of crosswalks within 200 meters of nearby overpasses, underpasses, or crosswalks. In case the exceptional installation is required, the feasibility study is to be thoroughly conducted by the local police agency. However, it is an undeniable fact that the specific installation standards for optimal types and locations of crosswalks are not yet to be established. This paper examines the development of traffic accident prediction model applicable to different types and locations of bus stops(type A and type B) at mid-block intersections. Furthermore, it develops the poisson regression model which sets the "number of traffic accidents" and "traffic accident severity" as dependent variables, while using "traffic volumes", "pedestrian traffic volumes" and "the distance between crosswalks and bus stops" as independent variables. According to the traffic accident prediction model applicable to the type A bus stop location, the traffic accident severity increases relative to the number of traffic volumes, the number of pedestrian traffic volumes, and the distance between crosswalks and bus stops. In case of the type B bus stop model, the further the bus stop is from crosswalks, the number of traffic accidents decreases while it increases when traffic volumes and pedestrian traffic volumes increase. Therefore, it is reasonable to state that the bus stop design which minimizes the traffic accidents is the type C design, which is the one in combination of type A and type B, and the optimal distance is found to be 65 meters. In case of the type A design and the type B design, the optimal distances are found to be within range 60~70meters.

• The Journal of the Korea Contents Association
• /
• v.17 no.5
• /
• pp.479-490
• /
• 2017

The objective of this study is to examine the association of social networks and medical care utilization of elderly living alone depending on self-rated health status, and also to measure the moderating effects of welfare services for elderly. To this purpose, the data which was collected from the 2014 National Survey on Elderly in Korea was analyzed by Chi-square test and Poisson regression. According to the results, social networks and elderly welfare services affected to medical care utilization of elderly living alone, only who aware of their self-rated health status as bad. With this group, the frequency of contact with family and participation in lifelong education had a significant effect on increasing medical care utilization. In contrast, the frequency of contact with neighbors and the participation in elderly employment program were significant to reduce the utilization of medical care. Furthermore, the moderating effects of elderly welfare services were also measured that formal social gathering has an effect of increasing the medical care utilization of elderly living alone by expansion of their social networks. Based on these results, this study consequently has an implication for suggesting expansion of elderly welfare services, which might be an alternative to social networks of elderly living alone, and also for seeking the direction of political intervention that helps health promotion and disease prevention through the research of medical care utilization.