• Structural Engineering and Mechanics
• /
• v.19 no.4
• /
• pp.425-440
• /
• 2005

In this paper, the behavior of a crack between two half-planes of functionally graded materials subjected to arbitrary tractions is resolved using a somewhat different approach, named the Schmidt method. To make the analysis tractable, it is assumed that the Poisson's ratios of the mediums are constants and the shear modulus vary exponentially with coordinate parallel to the crack. By use of the Fourier transform, the problem can be solved with the help of two pairs of dual integral equations in which the unknown variables are the jumps of the displacements across the crack surfaces. To solve the dual integral equations, the jumps of the displacements across the crack surfaces are expanded in a series of Jacobi polynomials. This process is quite different from those adopted in previous works. Numerical examples are provided to show the effect of the crack length and the parameters describing the functionally graded materials upon the stress intensity factor of the crack. It can be shown that the results of the present paper are the same as ones of the same problem that was solved by the singular integral equation method. As a special case, when the material properties are not continuous through the crack line, an approximate solution of the interface crack problem is also given under the assumption that the effect of the crack surface interference very near the crack tips is negligible. It is found that the stress singularities of the present interface crack solution are the same as ones of the ordinary crack in homogenous materials.

• Structural Engineering and Mechanics
• /
• v.60 no.6
• /
• pp.1063-1077
• /
• 2016

Components manufactured from composite materials are frequently subjected to superimposed mechanical and thermal loadings during their operating service. Both types of loadings may cause fracture and failure of composite structures. When composite cross-ply laminates of type [$0_m/90_n]_s$ are subjected to uni-axial tensile loading, different types of damage are set-up and developed such as matrix cracking: transverse and longitudinal cracks, delamination between disoriented layers and broken fibers. The development of these modes of damage can be detrimental for the stiffness of the laminates. From the experimental point of view, transverse cracking is known as the first mode of damage. In this regard, the objective of the present paper is to investigate the effect of transverse cracking in cross-ply laminate under thermo-mechanical degradation. A Finite Element (FE) simulation of damage evolution in composite crossply laminates of type [$0_m/90_n]_s$ subjected to uni-axial tensile loading is carried out. The effect of transverse cracking on the cross-ply laminate strength under thermo-mechanical degradation is investigated numerically. The results obtained by prediction of the numerical model developed in this investigation demonstrate the influence of the transverse cracking on the bearing capacity and resistance to damage as well as its effects on the variation of the mechanical properties such as Young's modulus, Poisson's ratio and coefficient of thermal expansion. The results obtained are in good agreement with those predicted by the Shear-lag analytical model as well as with the obtained experimental results available in the literature.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.10
• /
• pp.5-11
• /
• 2021

The compacted bentonite buffer is one of the most important components in an engineered barrier system (EBS) to dispose of high-level radioactive waste (HLW) produced by nuclear power generation. The compacted bentonite buffer has a crucial role in protecting the disposal canister against the external impact and penetration of groundwater, so it has to satisfy the thermal-hydraulic-mechanical requirements. Even though there have been various researches on the investigation of thermal-hydraulic properties, few studies have been conducted to evaluate mechanical properties for the compacted bentonite buffer. For this reason, this paper conducted a series of unconfined compression tests and obtained mechanical properties such as unconfined compressive strength, elastic modulus, and void ratio of Korean compacted bentonite specimens with different water content and dry density values. The unconfined compressive strength and elastic modulus increased, and the Poisson's ratio decreased a little with increasing dry density. It showed that unconfined compressive strength and elastic modulus were proportional to dry density. However, there was not a remarkable correlation between mechanical properties and water content.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.9
• /
• pp.1220-1226
• /
• 2021

In this paper, we propose a probabilistic handover scheme for enhancing spectral efficiency in drone-based wireless communication systems. When a moving drone base station (DBS) provides the drone-based wireless communication service to a user equipment (UE) located on the ground, our proposed handover scheme considers the distance between DBS and UE and small scale fading. In addition, our proposed handover scheme considers a handover probability to mitigate the signalling overhead that may occur when performing frequent handovers. Through simulations for drone-based wireless communication systems, we evaluate the spectral efficiency and the handover probability of our proposed handover scheme and the conventional handover scheme. The simulation results show that our proposed handover scheme can achieve higher average spectral efficiency than the conventional handover scheme which considers only the distance between DBS and UE.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.2
• /
• pp.274-281
• /
• 2019

Objective: The objective of this study was to estimate the risk of Campylobacter jejuni (C. jejuni) infection from various jerky products in Korea. Methods: For the exposure assessment, the prevalence and predictive models of C. jejuni in the jerky and the temperature and time of the distribution and storage were investigated. In addition, the consumption amounts and frequencies of the products were also investigated. The data for C. jejuni for the prevalence, distribution temperature, distribution time, consumption amount, and consumption frequency were fitted with the @RISK fitting program to obtain appropriate probabilistic distributions. Subsequently, the dose-response models for Campylobacter were researched in the literature. Eventually, the distributions, predictive model, and dose-response model were used to make a simulation model with @RISK to estimate the risk of C. jejuni foodborne illness from the intake of jerky. Results: Among 275 jerky samples, there were no C. jejuni positive samples, and thus, the initial contamination level was statistically predicted with the RiskUniform distribution [RiskUniform (-2, 0.48)]. To describe the changes in the C. jejuni cell counts during distribution and storage, the developed predictive models with the Weibull model (primary model) and polynomial model (secondary model) were utilized. The appropriate probabilistic distribution was the BetaGeneral distribution, and it showed that the average jerky consumption was 51.83 g/d with a frequency of 0.61%. The developed simulation model from this data series and the dose-response model (Beta Poisson model) showed that the risk of C. jejuni foodborne illness per day per person from jerky consumption was $1.56{\times}10^{-12}$. Conclusion: This result suggests that the risk of C. jejuni in jerky could be considered low in Korea.

• Structural Engineering and Mechanics
• /
• v.71 no.6
• /
• pp.627-641
• /
• 2019

The paper focuses on bending analysis of the functionally graded (FG) plates with arbitrary shapes and boundary conditions. The material property of FG plates is modelled by using the power law distribution. Based on the first order shear deformation plate theory (FSDT), the governing equations as well as boundary conditions are formulated and obtained by using the principle of virtual work. The coupled Boundary Element-Radial Basis Function (BE-RBF) method is established to solve the complex FG plates. The proposed methodology is developed by applying the concept of the analog equation method (AEM). According to the AEM, the original governing differential equations are replaced by three Poisson equations with fictitious sources under the same boundary conditions. Then, the fictitious sources are established by the application of a technique based on the boundary element method and approximated by using the radial basis functions. The solution of the actual problem is attained from the known integral representations of the potential problem. Therefore, the kernels of the boundary integral equations are conveniently evaluated and readily determined, so that the complex FG plates can be easily computed. The reliability of the proposed method is evaluated by comparing the present results with those from analytical solutions. The effects of the power index, the length to thickness ratio and the modulus ratio on the bending responses are investigated. Finally, many interesting features and results obtained from the analysis of the FG plates with arbitrary shapes and boundary conditions are demonstrated.

• Journal of Preventive Medicine and Public Health
• /
• v.52 no.3
• /
• pp.147-153
• /
• 2019

Objectives: The purpose of this study was to evaluate the association between body mass index (BMI) and severe lower urinary tract symptoms (LUTS) in Korean males. Methods: This study was conducted on males aged ${\geq}50years$ who participated in the 2011 Korean Community Health Survey. LUTS severity was assessed using the Korean version of the International Prostate Symptom Score (IPSS) questionnaire, and was dichotomized as severe (IPSS >19) and non-severe ($IPSS{\leq}19$). BMI was divided into 6 categories: <18.5, 18.5-22.9, 23.0-24.9, 25.0-27.4, 27.5-29.9, and ${\geq}30.0kg/m^2$. To evaluate the relationship between BMI and LUTS, a survey-weighted multivariate Poisson regression analysis was performed to estimate prevalence rate ratios (PRRs). Age, smoking status, alcohol intake, physical activity, educational level, household income, and comorbidities were adjusted for in the multivariate model. Results: A U-shaped relationship was detected between BMI and severe LUTS. Compared with a BMI of $23.0-24.9kg/m^2$, the PRR for a BMI < $18.5kg/m^2$ was 1.65 (95% confidence interval [CI], 1.35 to 2.02), that for a BMI of $18.5-22.9kg/m^2$ was 1.25 (95% CI, 1.09 to 1.44), that for a BMI of $25.0-27.4kg/m^2$ was 1.20 (95% CI, 1.00 to 1.45), that for a BMI of $27.5-29.9kg/m^2$ was 1.11 (95% CI, 0.83 to 1.47), and that for a BMI ${\geq}30.0kg/m^2$ was 1.85 (95% CI, 1.18 to 2.88). Conclusions: This study showed that both high and low BMI were associated with severe LUTS.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.29-34
• /
• 2019

We investigated on-off voltage ${\Delta}V_{on-off}$ of sub-10 nm JLCSG (Junctionless Cylindrical Surrounding Gate) MOSFET. The gate voltage was defined as ON voltage for the subthreshold current of $10^{-7}A$ and OFF voltage for the subthreshold current of $10^{-12}A$, and the difference between ON and OFF voltage was obtained. Since the tunneling current was not negligible at 10 nm or less, we observe the change of ${\Delta}V_{on-off}$ depending on the presence or absence of the tunneling current. For this purpose, the potential distribution in the channel was calculated using the Poisson equation and the tunneling current was calculated using the WKB approximation. As a result, it was found that ${\Delta}V_{on-off}$ was increased due to the tunneling current in JLCSG MOSFETs below 10 nm. Especially, it increased rapidly with channel lengths less than 8 nm and increased with increasing channel radius and oxide thickness.

• Quality Improvement in Health Care
• /
• v.24 no.2
• /
• pp.2-14
• /
• 2018

Purpose: The objective of this study was to report the incidence of falls in hospitals and analyze the risk factors for falls. Methods: This study used data on 1,216 patients who experienced falls from 2015 to 2017 during their hospitalization. The data was collected from the falls incident reports and patient' electronic medical record of hospital. Data were analyzed with descriptive statistics using Chi-square test, Fisher's exact test and multiple Poisson regression analysis with the SAS 9.4 Results: The incidence of falls was 1.38 per 1,000 patients days (2015), 1.81 per 1,000patients days (2016) and 1.99 per 1,000patients days (2017). The incidence of injury caused by falls (level III~V) was 0.05 per 1,000patients days (2015), 0.04 per 1,000patients days (2016) and 0.06 per 1,000patients days (2017). The largest number of falls occurred during night shift (42.5%), specifically in the patients' room (70.8%), and medical unit (66.0%). Average age of fallers was 69.1 years and 61.7% of them were older than 71 years. CCI and the patient's department have statistically significant differences in injury or injury levels from falls, but the integrated nursing care services had no significant difference in injury or injury levels from falls. Conclusion: The result of this study can be used as a reference for establishing a fall prevention strategy for hospitalized patients by presenting index values such as the fall rate.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.7
• /
• pp.41-50
• /
• 2019

Gyeongju bentonite is a buffer material primarily considered in Korea and it is highly compacted as a part of an engineered barrier system (EBS) of high-level radioactive waste repository. The compacted bentonite undergoes swelling stress by groundwater penetration and thermal stress by decay heat from a canister. Therefore, the mechanical properties of the compacted bentonite buffer material is crucial for the performance assessment of EBS. This paper aims to evaluate deformation properties of Gyeongju compacted bentonite using seismic methods. Two sets of compacted bentonite specimens were prepared having dry densities of $1.59g/cm^3$ and $1.75g/cm^3$ with water contents of 10.6% and 8.7%. Free-free resonant column tests were performed to measure constrained and unconstrained compression wave velocities. With the measured wave velocities, Young's modulus ($E_{max}$) and constrained modulus ($M_{max}$), material damping ratio ($D_{min}$), and Poisson's ratio at small strain were determined. As results, this paper evaluates the deformation properties of Gyeongju compacted bentonite and compares them with the results of previous researches.