• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2000년도 추계학술대회
• /
• pp.173-177
• /
• 2000

인산염계 5Li₂O, 36CaO, 20TiO₂, 27P₂O/sub 5/의 조성을 선정하여 10K/min 승온속도로 1300℃에서 2시간동안 유지시켜 모유리를 제조하였고, 최적의 핵형성을 위해 610℃에서 20시간, 최고 결정성장을 위해 840℃에서 20시간 동안 열처리함으로써 LiTi₂(PO₄)₃상과 β-Ca₃(PO₄)₂결정상이 존재하는 Glass Ceramics를 제조하였고, 이를 1N-HCI용액에서 3일간 담지하여 β-Ca₃(PO₄)₂결정상을 용출시켜 LiTi₂(PO₄)₃상만이 존재하는 다공성 Glass Ceramics를 제조하였다.

• 한국표면공학회지
• /
• 제35권2호
• /
• pp.93-100
• /
• 2002

To better understand the codeposition mechanism of phosphorous, surface pH and potential of cathode were measured during electrodeposition of Ni-P alloys. The pH of cathode surface was measured using a flat-bottom glass pH electrode and a 500 mesh gold gauze as cathode. The cathode surface pH was increased with increasing the current density and always higher than the pH in the bulk solution. As a result of overplotting the surface pH and cathode potential on the Pourbaix diagram, it was found that cathode surface shift to the domain of predominant of $H_2$$PO3$-or $H_2$$PO_2$-. Additionally, new deposition mechanism was suggested that $H_2$ $PO_2$- and $H_2$$PO_3$- play important roles in the deposition reaction of Ni-P alloys.

• 한국산학기술학회논문지
• /
• 제1권1호
• /
• pp.27-32
• /
• 2000

인산염계 Ag₂OㆍLi₂OㆍCaOㆍTiO₂ㆍP₂O/sub 5/ 조성에 CuO를 0.05∼l.5 mole 첨가하여 다공성 글래스 세라믹스를 제조하였으며. 제조된 모유리는 최적 핵형성을 위해 610℃. 최고 결정성장을 위해 840℃에서 열처리하였다. 1N-HC1에서 β-Ca₃(PO₄)결정상만을 선택적으로 용출하였으며 LiTi₂(PO₄)₃상과 AgTi₂(PO₄)₃결정상이 존재하는 Glass Ceramics를 제조하였다. 다공성 글래스 세라믹스의 항균효과 및 특성을 평가하였다. Staphylococcus aureus와 Salmonella typhi 균이 본 연구에 사용되었으며, 탁월한 항균효과를 나타내는 것으로 평가되었다.

• 한국환경보건학회지
• /
• 제22권3호
• /
• pp.49-55
• /
• 1996

Water parsley(Oenanthe javanica(Blume) DC) was raised with varying population density(S) in the laboratory aquarium unit to determine the growth equation. The population density was measure after 7 days. The resultant growth curve was well fit to the equation 1/S = A+B (1/S0) with a high correlation coefficient ($R^2$ = 0.999). The maximum specific absorption rate was $9.011 \times 10^{-5}$ kg $NO_x-N/kg$ water parsley$\cdot$day and $1.31 \times 10^{-5}$ kg $PO_4-P/kg$ water parsley$\cdot$day when the average population density was $2.62 kg/m^2$. The relationship between population density and nutrient absorption rate, the absorption rate of $NO_x-N$ was 5.04~5.24 mg/l$\cdot$day when the population density was $7.51~10.0 $mg/m^2\cdot day$ and the absorption rate of $PO_4-P$ was 0.56~0.78 mg/l$\cdot$day when the population density was 5.02~10.0 $kg/m^2\cdot day$. Taking into account the nutrient absorption rate and growth rate, the population density between $7.0 kg/m^2\cdot day$ and $8.0 kg/m^2 \cdot day$ was selected. The removal rate of nutrient was investigated after 7 days culture. Removal rate of $NO_x-N$ was 95.6~99.95% with initial concentration of 35 mg $NO_x-N/l$, and the removal rate of $PO_4-P$ was also high, indicating 80.24~98.9% with initial concentration of 5.95 mg $PO_x-P/l$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.807-810
• /
• 2002

$GdPO_4$:Tb phosphor particles with spherical shape and high photoluminescence were prepared by spray pyrolysis. The brightness of prepared $GdPO_4$:Tb under the vacuum ultraviolet(VUV) illumination was comparable with that of the commercial $Zn_2SiO_4$:Mn phosphor particles. The photoluminescence spectra of $GdPO_4$:Tb phosphor particles had maximum peak at 547 nm, and the sharp peaks at 480 nm, 580 nm, and 620 nm. The spherical morphology of prepared $GdPO_4$:Tb particles was completely maintained even after the posttreatment up to 1100 $^{\circ}C$. When the posttreatment temperature was over 1100 $^{\circ}C$, the particles did not have the spherical shape anymore. The average particle size of $GdPO_4$:Tb phosphor particles prepared by using $(NH_4)_2HPO_4$ was changed from 0.5 to 1.9 ${\mu}m$ and its effect on the PL intensity was investigated. It was found that the optimized $GdPO_4$:Tb particles have a good excitation spectrum comparable to that of the commercial $Zn_2SiO_4$:Mn phosphor particles under the VUV illumination from 140 to 220 nm. We concluded that the $GdPO_4$:Tb phosphor particles with spherical shape prepared by spray pyrolysis is a promising candidate for a green-emitting PDP phosphor.

• 접착 및 계면
• /
• 제14권2호
• /
• pp.95-100
• /
• 2013

본 연구에서는 메탈로센 폴리올레핀(metallocene polyolefin, me-PO)과 점착부여제(tackifier)를 이용해 열용융형 감압접착제(hot-melt pressure sensitive adhesives, HMPSAs)를 제조하여 물리적 특성을 확인하였고, me-PO가 HMPSAs의 용도에서 스타이렌계 블록 코폴리머(styrenic block copolymers, SBCs)를 대체하여 사용 가능한지에 대해 고찰하였다. 또한, me-PO를 베이스 폴리머로 사용한 HMPSAs의 성능을 최적화하기 위하여 점착부여제가 가져야 할 특성을 알아보고자 하였다. me-PO를 이용하여 Dahlquist Criterion을 만족하는 HMPSAs를 얻기 위해서는 점착부여제와 함께 10% 이상의 프로세스 오일을 혼합 사용하여야 했고, Spray Type의 Applicator에 적합한 수준의 점도를 가지는 HMPSAs를 얻기 위해서는 상대적으로 결정화도가 낮은 제2의 me-PO를 사용해야 했다. 그리고, 분자량이 큰 점착부여제를 사용하면 SBCs계 HMPSAs에 비해 부족한 유지력을 개선시키는데 기여하는 것으로 밝혀졌다.

• 한국환경과학회지
• /
• 제32권10호
• /
• pp.731-739
• /
• 2023

In this study, lab-scale phosphorus coagulation/precipitation experiments were performed using three types of polyaluminum chloride (PAC) with different Al contents (10%, 12%, and 17%). The PO₄-P removal efficiencies at various operating conditions, such as initial PO₄-P concentration, initial pH, and Al/P molar ratio, were evaluated, and correlations among the operating factors affecting phosphorus coagulation/precipitation with PAC were derived to optimize the process efficiency. When the initial PO₄-P concentration was 0.065 and 0.161 mmol P/L under an initial pH of 8-10, the optimal PAC dose was 0.126-0.378 and 0.189-0.667 mmol Al/L, respectively. Under these conditions, the Al/P molar ratio was 2.16-6.18 and 1.28-4.30, respectively, and the PO₄-P removal efficiency was in the range of 40.2-92.5%. When the Al/P molar ratio was 2 or less under an initial pH condition of 6-8, the PO₄-P removal efficiency was approximately ≤40% owing to insufficient Al³⁺ ions. However, when the Al/P molar ratio is 3-5, the PO₄-P removal efficiency improved to approximately 80-90%. Thus, the optimal Al/P molar ratio to achieve a PO₄-P removal efficiency of over 90% was determined to be approximately 4 in the PO₄-P coagulation/precipitation process using PAC.

• 한국환경과학회지
• /
• 제8권2호
• /
• pp.171-176
• /
• 1999

To estimate the residence times of aerosols in air, the activities of $^{210}Pb$ and $^{210}Po$ in aerosols were measured at 4 sites in Pusan. All aerosol samples were collected by a high volume air sampler from January to October 1996. The activities $^{210}Pb$ and $^{210}Po$ in Pusan were varied from 11.77 to 67.57 dpm/1000$m^3$ and from 2.63 to 15.91 dpm/1000$m^3$, respectively. The mean activities were 34.62 dpm/1000$m^3$ for $^{210}Pb$ and 8.24 dpm/1000$m^3$ for $^{210}Po$. The highest values of the activities of $^{210}Pb$ and $^{210}Po$ were appeared at P3 site and the lowest values at P4 site. During the sampling period, the trends of the activities of $^{210}Po$ and $^{210}Pb$ were similar to total suspended particulate matter(TSP) concentrations. The mean residence times of atmospheric aerosols calculated from $^{210}Po$/$^{210}Pb$ activity ratio was about 60~80 days in Pusan. The longest residence time of atmospheric aerosols was in January because of the lack of rainout and washout, but the shortest residence time was in August, largely due to scavenging effect by frequent rains. The activities of $^{210}Po$ and $^{210}Pb$ in atmospheric aerosols were different in time and space, which seems that the distribution of $^{210}Po$ and $^{210}Pb$ activities and scavenging processes in air may be controlled by the local and meteorological conditions.

• 대한화학회지
• /
• 제40권1호
• /
• pp.1-10
• /
• 1996

Gibbs' adsorption isotherms을 이용하여, 계면에서 보조계면활성제 분자의 분자 면적과 계면장력거동에 미치는 ethylene oxide(EO)와 propylene oxide(PO)의 영향을 조사하였다. 일반식 $C_4H_9O(EO)m(PO)_nH$를 갖는 alcohol들의 보조계면활성제로서의 특성을 연구하였는데, 이 alcohol들은 일반적으로 사용되는 보조계면활성제에 비해서 분자량이 크며 계면활성 또한 큰 특성을 갖고있다. EO와PO의 몰수와 이들이 첨가된 상대적 순서는 물/기름 계면에서 alcohol 분자의 분자면적과 계면장력 특성에 큰 영향을 미치는 것을 알 수 있었으며, 다음의 결론을 얻었다. 1) PO는 EO에 비해서 계면흡착 효율은 낮으나, 계면장력 저하 능력은 더 크다. 2) 분자량은 같으나 구조가 다른 분자들, 즉 EO와PO의 첨가 순서만 다른 분자들의 경우는, 계면흡착 효율이 큰 (계면에서의 분자면적이 작은) 분자들이 계면장력 저하 능력이 더 크다. 3) 동일한 친유기에 EO나 PO가 많이 첨가될수록, 분자들의 계면에서의 분자면적은 커지나 계면장력 저하능력도 커진다.

• Journal of Chest Surgery
• /
• 제16권2호
• /
• pp.213-220
• /
• 1983

Pulmonary function is the determinant of blood gas tension. However, Acid-Base disturbances can also alter partial pressures of oxygen and carbon dioxide in arterial blood. During respiratory acidosis $PO_2$ will be lowered and reverse changes will be produced during respiratory alkalosis. On the other hand, in metabolic acidosis $PO_2$ will be elevated and $PCO_2$ will be lowered by the respiratory compensation, and reverse response will be induced in metabolic alkalosis. Urinary gas tension has many influencing factors than arterial blood and difficult to estimate the tendency of its alterations. Urinary $PO_2$ and $PCO_2$ are not always identical level as venous blood. It is to be altered by blood gas tension, flow rate of urine, metabolic rate of kidney, and Acid-Base status of blood. Particularly countercurrent exchange of oxygen and carbon dioxide in the renal medulla will make larger alteration of gas tension than venous blood. After induction of Acid-Base disturbances [disturbances] arterial and urinary $PCO_2$, $PO_2$, urinary volume, and osmolarity were determined in dogs, and the relationships between arterial and urinary $PCO_2$ , $PO_2$ Acid-Base disturbances, urinary volume, and osmolarity were investigated. 1. During the acute Metabolic and Respiratory disturbances urinary pH did not respond on respiratory origin. However, there were immediate urinary response in pH on metabolic origin. 2. Urinary $PO_2$, $PCO_2$, did not always follow arterial or venous gas tension and Acid-Base disturbance. Urinary $PCO_2$, correlate well with the urinary volume. The larger the urinary volume, $PCO_2$ lowered to the venous level. The smaller the urinary volume, urinary $PCO_2$ tends to be higher. However urinary $PO_2$ did not have any particular correlation with urinary volume. 3. Correlation between urinary $PCO_2$ and $PO_2$ were inversely proportional to arterial blood. Differences of $PCO_2$ between arterial blood and urine also did not have any particular correlation with urinary volume. This may suggest that changes on blood gas tensions can influence on urinary $PCO_2$. 4. There were eminent clear inverse correlation between urinary $PCO_2$ and osmolar concentrations of urine. Above results strongly suggest that partial pressure of gas in urine primarily depend upon counter-current exchanges in renal medullary tissues.