• Journal of Electrochemical Science and Technology
• /
• v.2 no.2
• /
• pp.76-84
• /
• 2011

Potentiostatic oxidation of Pb-1.7%Sb alloy used in the manufacture of grids of lead-acid batteries over the potential range from -1.0V to 2.3V in 5M $H_2SO_4$ in the absence and the presence of 0.4M $H_3PO_4$ and the self-discharge characteristics of the oxide layer formed is studied by electrochemical impedance spectroscopy (EIS). Depending on the potential value, sharp variations in resistance and capacitance of the alloy are recorded during the oxidation and they can be used for identification of the various substances involved in passive layer. Addition of $H_3PO_4$ is found to deteriorate the insulating properties of the passive layer by the retardation of the formation of $PbSO_4$. $H_3PO_4$ completely inhibits the current and impedance fluctuations recorded in $H_3PO_4$-free solutions in the potential range 0.5 V-1.7 V. These fluctuations are attributed to the occurrence of competitive redox processes that involve the formation of $PbSO_4$, $PbOSO_4$, PbO and $PbO_2$ and the repeated formation and breakdown of the passive layer. Self-discharge experiments indicate that the amount of $PbO_2$ formed in the presence of $H_3PO_4$ is lesser than in the $H_3PO_4$-free solutions. The start of transformation of $PbSO_4$ into $PbO_2$ is greatly shortened. $H_3PO_4$ facilitates the diffusion process of soluble species through the passive layer ($PbSO_4$ and basic $PbSO_4$) but impedes the diffusion process through $PbO_2$.

• Food Science of Animal Resources
• /
• v.35 no.2
• /
• pp.197-204
• /
• 2015

This study was performed to investigate the effect of palm or coconut solid lipid nanoparticles (PO-SLNs or CO-SLNs) on growth of Lactobacillus plantarum (L. plantarum) in milk during storage period. The PO or CO (0.1% or 1.0%) was dispersed both in distilled water (DW) and ultra high temperature milk (UHTM), and subsequently emulsified with Tween^® 80 by ultrasonication (30% power, 2 min). Increase in particle size and encapsulation efficiency (EE%) in DW was observed with an increase in oil concentration, whereas a decrease in ζ-potential of SLNs was noted with an increment in oil concentration. Moreover, the CO-SLNs exhibited relatively smaller particle size and higher EE% than PO-SLNs. The CO-SLNs were found to be more stable than PO-SLNs. Higher lipid oxidation of PO or CO-SLNs in UHTM was observed during the storage test, when compared to PO or CO-SLNs in DW. However, there was no remarkable difference in lipid oxidation during storage period (p>0.05). In the growth test, the viability of L. plantarum in control (without PO or CO-SLNs in DW) exhibited a dramatic decrease with increasing storage period. In addition, viability of L. plantarum of PO or COSLNs in UHTM was higher than that of SLNs in DW. Based on the present study, production of SLNs containing PO or CO in UHTM is proposed, which can be used in lactobacilli fortified beverages in food industry.

• Journal of Electrochemical Science and Technology
• /
• v.11 no.3
• /
• pp.282-290
• /
• 2020

In this article, we report the effect of blended cathode materials on the performance of all-solid-state lithium-ion batteries (ASLBs) with oxide-based organic/inorganic hybrid electrolytes. LiFePO₄ material is good candidates as cathode material in PEO-based solid electrolytes because of their low operating potential of 3.4 V; however, LiFePO₄ suffers from low electric conductivity and low Li ion diffusion rate across the LiFePO₄/FePO₄ interface. Particularly, monoclinic Li₃V₂(PO₄)₃ (LVP) is a well-known high-power-density cathode material due to its rapid ionic diffusion properties. Therefore, the structure, cycling stability, and rate performance of the blended LiFePO₄/Li₃V₂(PO₄)₃ cathode material in ASLBs with oxidebased inorganic/organic-hybrid electrolytes are investigated by using powder X-ray diffraction analysis, field-emission scanning electron microscopy, Brunauer-Emmett-Teller sorption experiments, electrochemical impedance spectroscopy, and galvanostatic measurements.

• Horticultural Science & Technology
• /
• v.18 no.3
• /
• pp.321-326
• /
• 2000

To compare germinability of primed seeds with that of water imbibed and nonprimed seeds at different temperatures, percent germination, number of days to attain 50% of the final germination percentage (T50) and mean number of days to germination (MDG) were evaluated at various temperatures ranged from $10^{\circ}C$ to $35^{\circ}C$. Primed carrot seeds in -0.50 MPa PEG 8000 showed higher percent germination at $10^{\circ}C$ or $35^{\circ}C$. Reductions in T50 and MDG values were observed at all germination temperatures when primed with the PEG. The PEG combined with 100 mM $K_3PO_4$ was not as effective as the PEG alone in improving the germinability of carrot seeds. Nonprimed lettuce seeds germinated only 2% at $30^{\circ}C$ or $35^{\circ}C$. However, priming with 50 mM $K_3PO_4$ increased germination to 40% at $30^{\circ}C$ and to 21% at $35^{\circ}C$. In contrast to the single treatment of 50mM $K_3PO_4$, priming lettuce seeds in a mixture of 50mM $K_3PO_4$ and 200 mM $KH_2PO_4$ resulted in a lower percentage of germination, but a significant greater reduction of T50 and MDG. Percent germination was increased when 200 mM $KH_2PO_4$-primed onion seeds and 100 mM $Ca(NO_3)_2$-primed Welsh onion seeds were germinated at $10^{\circ}C$ or $35^{\circ}C$. Combined treatments with $Ca(NO_3)_2$ for onion and with $KH_2PO_4$ for Welsh onion seeds did not improve percent germination, but they significantly reduced T50 and MDG.

• Nuclear Engineering and Technology
• /
• v.56 no.6
• /
• pp.2174-2181
• /
• 2024

In this work, Sr_0.5Zr₂(PO₄)₃-SmPO₄ dual-phase ceramics were prepared via in-situ synthesis process, which is a potential novel nuclear waste form for immobilizing the fission product ⁹⁰Sr and the trivalent actinide radionuclides in high-level waste (HLW). And the preparation technology, microstructure and chemical durability of Sr_0.5Zr₂(PO₄)₃-SmPO₄ dual-phase ceramics were systematically investigated. It was confirmed that the optimum microwave-sintering temperature (1050 ℃) and heat preservation time (1.5 h) is estimated by Archimedes method. Besides, the as-prepared samples that were consisted of strontium zirconium phosphate (SrZP) and monazite showed the remarkable densification, in which the two crystalline phases were intermixed well with each other. Meanwhile, the formation and evolution of microstructure was also consistent with the variational rule of Sr_0.5Zr₂(PO₄)₃/SmPO₄, indicating that there was not mutual reaction during the in-situ synthesis process. The PCT and MCC-1 experimental results demonstrated that the elemental normalized leaching rates of tested samples are all at a low level (LR_Sr ~10^-4 g·m^-2·d^-1, LR_Zr ~10^-8-10^-6 g·m^-2·d^-1, LR_Sm ~10^-7-10^-5 g·m^-2·d^-1 and LR_P ~10^-4 g·m^-2·d^-1). It is indicated that Sr_0.5Zr₂(PO₄)₃-SmPO₄ dual-phase ceramics possesses excellent chemical durability for HLW disposal.

• Journal of Plant Biology
• /
• v.14 no.2
• /
• pp.1-6
• /
• 1971

When germination beds of carrot seeds were treated with either 0.01M or 0.05M concentrations of Ca(NO3)2, CaSO4, MgSO4, K2SO4 and KH2PO4, an acceleration in the germination rate was observed in the groups treated with 0.01M KH2PO4 and 0.05M MgSO4 and 0.05M Ca(NO2)3. In earlier work by the author with acetone a similar result was observed and reported. The pH range in these experiments was maintained between 5.0 and 6.0. It was found that the groups treated with 0.05M K2SO4, 0.05M Ca(NO3)2, 0.05M Ca(NO3)2, 0.05M MgSO4, 0.01M KH2PO4, 0.01M Ca(NO3)2 germinated earlier than the control group. The acceleration of the germintion rate varied with the inorganic compounds used in the following descending order; 0.01M KH2PO4, 0.05M Ca(NO3)2, 0.05M K2SO4, 0.05M CaSO4 and 0.05M KH2PO4. As a result of these expriments, it occurs to the author that in the germination of carrot seeds some inorganic compounds appear to activate the osmotic function of carrot seeds causing acceleration in the germination rate.

• Journal of Environmental Science International
• /
• v.8 no.2
• /
• pp.227-231
• /
• 1999

This study was conducted to investigate the removal characteristics of $PO_4^{3-}-P$ contained in livestock wastewater using waste concrete. With small particle size, increased dosage and temperature of water, $PO_4^{3-}-P$ was well removed by waste concrete.$PO_4^{3-}-P$ was removed by adsorption reaction in low pH of the primary phase, but the crystallization reaction predominated for increasing pH with passed time. As a result of adapting the adsorption isotherm equation, $PO_4^{3-}-P$ removal was more affected by the crystallization reaction than the adsorption reaction. In the SEM micrograph, there was no evident change on the waste concreter surface. Particle size was plate-phase before reaction but appeared a dense form to progress in the crystallization reaction.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.659-660
• /
• 2006

The low crosstalk row-decoder is studied for PoRAM applications. Because polymer-based memories can be more densely integrated than established silicon-based ones, PoRAM is highly sensitive for the crosstalk problem. To overcome the problem and to suggest the suitable decoder for PoRAM, this paper shows the comparison of the row-path characteristics for both the 2-stage dynamic logic decoder and the 2-stage static logic decoder. Moreover, to suppress the Glitch effect which is observed by using the static logic decoder, the Master-Slave(M/S) D-Flip/Flop(D-F/F) is applied as a deglitch. Finally, the improved output result of the 2-stage static logic decoder with the M/S D-F/F is shown..

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1279-1282
• /
• 2009

The luminescence properties of a potential blue-emitting $RbBaPO_4:Eu^{2+}$ phosphor substituted with various metal ions have been investigated. The main emission wavelength of the phosphor samples was red-shifted by the substitution with K and Sr ions. The maximum peak intensity was obtained from the sample $Rb_{0.25}K_{0.75}Ba_{0.99}Eu_{0.01}PO_4$ which showed 144% relative intensity versus that of BAM:$Eu^{2+}$ phosphor under 254 nm excitation.

• Journal of Bio-Environment Control
• /
• v.17 no.1
• /
• pp.32-37
• /
• 2008

Light transmittance of PO-2 film was 71.2% higher than any other films, because of low amount of pending water and attaching dust on film surface. On dawn, the air temperature of tunnel were higher than that of outdoors as much as between 11.8 and $14.5^{\circ}C$ on Feb. 19 to 20, 2007. The air temperature in the greenhouse covered with PO-2 film was higher than any other films as much as $2.3^{\circ}C$. Analyzing of folate in oriental melon, the folate contents of fruit were between 68.9 and $113.4\;{\mu}g/100\;g$ according to varieties. In winter, the folate contents in the treatment of PO-2 film was higher than that in the treatment of PE film as much as 17%. Above $15^{\circ}C$ in outdoors mean air temperature, the folate contents were as much as between 55.2 and $75.2\;{\mu}g/100\;g$. The folate contents in the treatment of PO-2 film was higher than that in the treatment of PE film as much as 36%.