• Proceedings of the KIPE Conference
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.415-416
• /
• 2012

본 논문에서는 저가격형 PoE(Power over Ethernet)를 위한 새로운 부하분담기법을 적용한 스위칭 전원 회로를 제안한다. 기존의 PoE 전원회로는 Ethernet 채널 당 제한된 전력용량으로 인해 보다 큰 전력이 요구될 경우 채널별 DC/DC컨버터의 출력을 서로 병렬 접속하여 사용하고 있으며 각 채널별 부하를 동일하게 분담하기 위해 부하분담 IC 및 부가회로가 추가됨에 따라 회로 구조가 복잡하고 부피가 증대되는 단점이 있다. 제안된 PoE 전원회로는 이러한 문제를 해결하기 위해 병렬 연결된 채널 간 부하분담을 별도의 부가회로 없이 일정하게 제어할 수 있다. 제안 회로의 타당성 검증을 위해 이론적 분석 및 50W 급 시작품 제작을 통한 실험결과를 제시한다.

• Journal of the Korean Society of Radiology
• /
• 제15권3호
• /
• pp.391-399
• /
• 2021

Eu²⁺ doped polyphosphate NaSr(PO₃)₃ blue-emitting phosphors were synthesized by the conventional solid state method in a reductive atmosphere. The phase formation of NaSr(PO₃)₃ phosphors were characterized by using the X-ray powder diffraction (XRD) measurement. The photoluminescence emission and excitation spectra of the NaSr(PO₃)₃:Eu²⁺ phosphor, and decay curves were measured. Under the near-UV excitation, the phosphor exhibits a band emission around 420 nm assigned to the 4f⁶5d→f7(8S^7/2) transition of Eu²⁺. The temperature dependent emission spectra and decay curves were measured to elevate the thermal properties of the Eu²⁺ doped phosphors. The as-prepared NaSr(PO₃)₃:Eu²⁺ phosphors show a strong temperature dependent performance, which can serve as a promising temperature sensor.

• Applied Biological Chemistry
• /
• 제46권2호
• /
• pp.140-143
• /
• 2003

This study was performed to develop a more rapid and simple nutrient diagnosis method of plants than the conventional leaf analysis method. tomato (Lycopersicon esculentum Mill. cv. super momotaro) was planted in the mixed media produced by mixing perlite and rock wool at 1 . 1 (v/v) ratio. The Yamazakki nutrient solutions for cucumber and tomato were supplied to the media using the micro-drip irrigation system. Experimental plots produced consisted of no fertilization, deficient fertilization, adequate fertilization and surplus fertilization for N, P and K, respectively. Each experimental plot was replicated four times. Specific color different sensor values (SCDSV) measured by the chlorophyll meter were closely related to total-N concentrations in the leaves measured by the conventional method. Nitrate, $PO_4$ and K concentrations in petiole sap measured by test strips #(Reflectoquant^{\circledR},\;Merck,\;Germany)$ showed a significant relationship with total-N, p and K concentrations in leaves. The linear regression equations between $NO_3,\;PO_4$ and K concentrations in petiole sap and total-N, p and K concentrations in the leaves were prepared. The optimum levels of $NO_3,\;PO_4$ and K in petiole sap were obtained by plugging the optimum concentrations of total-N, p and K in the leaves by other researchers into the equations. In conclusion, the SCDSV by the chlorophyll meter and concentrations of NO3, p and K in petiole sap measured by the test strips would be suitable for rapid estimation of plant nutrient status.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제15권6호
• /
• pp.1221-1226
• /
• 2011

In order to analyze the receiver gain characteristic of the Soret-type FZPL lens antenna which is operated at 12GHz, TLM method can be applied. The application of the FZPL lens antenna is often use the receiver for satellite TV system, radio telescope, and Geodetic System. Some numerical results computed by TLM method are compared with Kirchhoff's approximation and PO method. The focal characteristic of receiver gain on main axis of the FZPL is mostly shown at the front side, which means that the position of the receiver should be properly calibrated.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• 제60권11호
• /
• pp.2064-2075
• /
• 2011

In this paper, robust multi-level perturbation and observation (MLPO) maximum power point tracking (MPPT) control are presented of the environmental change including the solar radiation and temperature. Because the maximum power point of the Photovoltaic (PV) is changing according to the solar radiation and temperature, the technology which traces the maximum power point in order to increase the power efficiency is recognized as the very important part. The general requirement for the MPPT is that system is simple, the cost is inexpensive, the PV tracking function and output change are small. Conventional perturbation and observation (PO) method is a simple system but there is the disadvantage that an efficiency of system becomes low. In addation, the incremental conductance (IC) control is required expensive CPU because of a large of calculations. In order to solve this problem, in this paper, the MLPO MPPT control using the method diversifying the step size according to the environment condition is presented. The validity of the MLPO method presenting from this paper is proved through analyzing the solar power generation output error at the steady state.

• Journal of Electrochemical Science and Technology
• /
• 제3권3호
• /
• pp.135-142
• /
• 2012

Over the past few years, $LiFePO_4$ has been actively studied as a cathode material for lithium-ion batteries because of its advantageous properties such as high theoretical capacity, good cycle life, and high thermal stability. However, it does not have a very good power capability owing to the low lithium-ion diffusivity and poor electronic conductivity. Reduction in particle size of $LiFePO_4$ to the scale of nanometers has been found to dramatically enhance the above properties, according to many earlier reports. However, because of the intrinsically low tap density of nanomaterials, it is difficult to commercialize this method. Many studies are being carried out to improve the volumetric energy density of this material and many methods have been reported so far. This paper provides a brief summary of the synthesis methods and electrochemical performances of micro-spherical $LiFePO_4$ having high volumetric energy density.

• Bulletin of the Korean Chemical Society
• /
• 제31권8호
• /
• pp.2361-2367
• /
• 2010

$TiO_2-ZrO_2$ was prepared with surfactant through a sol-gel method. Catalysts containing 5 - 35% $H_3PO_4$ were prepared using these oxides. Subsequently the catalytic performance of prepared catalysts was determined for liquid phase esterification of aromatic acids. $H_3PO_4/TiO_2-ZrO_2$ has been used as catalyst to synthesize various novel esters by esterification of some aromatic acids with aliphatic alcohols (2-propanol, 1-butanol, iso butanol, 3-pentanol, 1-hexanol, heptanol, cyclo heptanol, octanol and decanol). Under optimized conditions, maximum yields and selectivity (100%) to the corresponding ester, was obtained by using 25 wt % $H_3PO_4/TiO_2-ZrO_2$ as catalyst. The Catalyst can be easily recycled after reaction and can be reused without any significant loss of activity/selectivity performance. No by-product formation, high yields, short reaction times, mild reaction conditions, operational simplicity with reusability of the catalyst are the salient features of the present synthetic protocol. The reaction was carried out under solvent-free condition.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.405-412
• /
• 2006

Among the various problems involved in the structural analysis of the Korean traditional wooden structure, the analytical model for the Kong-Po is controversial subject as usual. While some experiments are tried for establishing the basis of analytical models, most of these experiments are performed using scale down specimens. So, it is not possible to apply these experimental results to structural analysis of Korean traditional wooden structure directly. A numerical study for analogizing the stiffness of full scale Kong-Po structure is performed on the basis of experimental specimen. Some parameter studies using finite element method are made in this study. The finite element analysis used in this study is geometric material nonlinear analysis. The stiffness of Kong-Po structure found out in this study can be used for modelling the joints of the Korean traditional wood structure in frame analysis.

• Carbon letters
• /
• 제6권2호
• /
• pp.89-95
• /
• 2005

Crushed peach stone shells were impregnated with $H_3PO_4$ of increasing concentrations (30-70%) followed by heat treatment at 773 K for 3 h. Produced carbons (ACs) were characterized by $N_2$ adsorption at 77 K using the BET-equation and the ${\alpha}$-method. High surface area microporous ACs were obtained, with enhanced internal pore volume, as function of % $H_3PO_4$. Adsorption isotherms from aqueous solution were determined for methylene blue (MB) and p-nitrophenol (PNP), as representatives for dye and phenolics pollutant molecules. Application of the Langmuir model proved the high limiting capacity towards both solute molecules, MB was uptaken in increasing amounts as function of $H_3PO_4$ concentration and generated porosity. High removal of PNP was almost the same irrespective of porosity characteristics. Competitive adsorption of $H_2O$ molecules on the hydrophilic carbon surface seems to partially reduce the available area to the PNP molecules. Application of the pseudo-second order law described well the fast adsorption (${\leq}$ 120 min) at two initial dye concentrations.

• Journal of the Korean Society of Costume
• /
• 제28권
• /
• pp.99-112
• /
• 1996

In this study I purpose a new approach to the study of Korean costume history which includes a statistical method used in the prac-tical measurement of excavated Po's and the analysis of their quantitative changes. In the framework used in this study I de-pend on the nineteen variables picked out from the typological and chronological analysis of excavated clothes. The interrelationship of the variables as well as the standard of each part and its deviation in other forms are may main concern. Other methods are also very useful in my thesis: Correlation analysis Regression analysis Discrimination analysis Cluster analysis Discrimination analysis Cluster analysis Factor analysis One way analysis of variance. The findings of my study can be summarized as follows: 1. Every type of po has a general tendency to have more broadened sleeves while it does not show any considerable changes in the total length and in the width of armholes. 2. In the Correlation analysis each part of Po's is handled separately accordign to its chronology and type. The Regreesion analysis makes it possible to provide the sizes of miss-ing parts in excavated clothes and the numeri-cal value of each part needed in the pattern making. 3. The Discrimination analysis of the Po's whose types are unknown leads to the con-clusion that Chongsam and Chikryong Po are classified into Chikryong Po whereas Hongui is classified into Jooui In addition I propose discriminational function by which the age classification is possible discovering the variables associated with time change. 4. Five items-Gerneral Park's clothes Taewongun's clothes and three others produced later for the purpose of preserving Korean costume are proved to be in a differ-ent group and hence analyzed separately in the visual grouping of changui which is done after the cluster analysis and the factor analysis. 5. The results of the one way analysis of variance reveal that there is a difference in each part from period: the back width the sleeve length the sleeve width thelean fig-ure the breasttie length the breasttie width outside quesset upper inside quesset lower outside neckband length insideneckband length etc.