• Journal of Adhesion and Interface
• /
• v.4 no.1
• /
• pp.1-8
• /
• 2003

In this work, the effect of PMR-15 content on the variation of surface free energy of the DGEBA/PMR-15 blend system was investigated in terms of contact angles and mechanical interfacial tests. Based on FT-IR result of the blend system. C=O (1,772, $1,778cm^{-1}$) and C-N ($1,372cm^{-1}$) peaks appeared with imidization of PMR-15 and -OH ($3,500cm^{-1}$) peak showed broadly at 10 phr of PMR-15 by ring-opening of epoxy. Contact angle measurements were performed by using deionized water and diiodomethane as testing liquids. As a result, the surface free energy of the blends gave a maximum value at 10 phr of PMR-15, due to the significant increasing of specific component. The mechanical interfacial properties measured from the critical stress intensity factor ($K_{IC}$) and the critical strain energy release rate ($G_{IC}$) showed a similar behavior with the results of surface energetics. This behavior was probably attributed to The improving of the interfacial adhesion between intermolecules, resulting from increasing the hydrogen bondings of the blends.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.265-268
• /
• 2002

In this work, the blend system of epoxy and PMR-15 polyimide is investigated in terms of the cure behaviors and thermal stabilities. The cure behaviors are studied in DSC measurements and thermal stabilities are also carried out by TGA analysis. DDM (4, 4'-diamino diphenyl methane) is used as curing agent for EP and the content of PMR-15 is varied within 0, 5, 10, 35, and 20 phr to neat EP. As a result, the cure activation energy ($E_a$) is increased at 10 phr of PMR-15, compared with that of neat EP. From the TGA results of EP/PMR-15 blend system, the thermal stabilities based in the initial decomposed temperature (IDT) and integral procedural decomposition temperature (IPDT) are increased with increasing the PMR-15 content. The fracture toughness, measured in the context of critical stress intensity factor ($K_{IC}$) and critical strain energy release rate ($G_{IC}$), shows a similar behavior with $E_a$. This result is probably due to the crosslinking developed by the interactions between intermolecules in the polymer chains.

• Journal of Adhesion and Interface
• /
• v.5 no.1
• /
• pp.3-11
• /
• 2004

In this work, the cure behaviors of the DGEBA/PMR-15 blends initiated by N-benzylpyrazinium hexafluoroantimonate (BPH) as a cationic latent catalyst were performed in DSC and DMA analyses. And, the thermal stabilities were carried out by TGA analysis and their mechanical interfacial properties of blends were measured in the context of critical stress intensity factor ($K_{IC}$). As a result, the curing activation energy ($E_a$) determined from Ozawa's equation in DSC and the relaxation activation energy ($E_r$) from DMA were increased with increasing PMA-15 content. Also, the thermal stabilities obtained from the integral procedural decomposition temperature (IPDT) and the glass transition temperature ($T_g$) were highly improved with increasing the PMR-15 content, which were probably due to the high heat resistance. And, the $K_{IC}$ showed a similar behavior with $E_a$, which was attributed to the improving of the interfacial adhesion or hydrogen bondings between intermolecular chains.

• Journal of Oriental Neuropsychiatry
• /
• v.18 no.1
• /
• pp.111-122
• /
• 2007

Objective : Progressive muscle relaxation(PMR) therapy is the way of mind and body self-regulation which makes major muscles tension to be comfortable condition. It was considered to be important to check the level of relaxation in objective validity. Therefore, Heart rate variability(HRV) is the valuable measurement to investigate the effect of progressive muscle relaxation therapy on autonomic nerve system. Method : I studied 38 subjects. The subjects were measured HRV at first. And then, Using a CD player, the subjects listened to recorded PMR program for 15 minutes. After this progress, I rechecked HRV. Results : heart rate item of HRV was significantly decreased. Also, the numerical value of SDNN(standard deviation of all NN intervals) and SDSD(standard deviation of differences between adjacent NN intervals) items of HRV were showed significantly increased in all subjects after PMR. Conclusion : It indicated that PMR is efficient for inspiring resistance of the stress and a sense of stability, and PMR is a valuable method to reduce the mind stress and stiffness of body muscle.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.290-290
• /
• 2022

Powdery mildew is known to be one of the serious diseases in C. moschata cultivation. Plants infected with powdery mildew cause damage to cultivation areas such as occurrence of deformity fruit and decrease in quantity. also, it has been reported that many farms have difficulties in controlling powdery mildew due to the outbreak under various conditions throughout the year. Therefore, this study intends to perform a phenotype test and a genotype test for C. moschata 60 lines grown in Jenong S&T. Podospareaxanthii, known as a pathogen that causes powder mildew disease in pumpkins in Korea, was collected and used as an inoculation source, phenotype test was performed by examining the infection area rate(%) of powdery mildew disease that occurred in leaves 25 days after inoculation. It was determined that 0% of the infection area rate was in the first stage, 1 to 5% in the second stage, 6 to 15% in the third stage, 16 to 30% in the fourth stage, and 31% or more in the fifth stage, The first and second stages were judged as resistance, the third as moderate resistance, and the fourth and fifth stages as sensitivity. As a result of the phenotype test, it was confirmed that the resistance was 21 points, moderate resistance was 14 points, and sensitivity was 25 points. After searching for the genes related to powdery mildew resistance resistance, pm-0, CmbHLH87, and LOC111453072, 21 points of resistance and 9 points of moderate resistance identified through phenotype tests were identified through gel electrophoresis after polymerase chain reaction(PCR) using 5 primers related to 3 genes. As a result of genotype testing of a total 30 points, the CmbHLH87 and LOC111453072 gene were found to be resistant bands in all points, PMR1 was identified as 20 points for resistance, 4 points for moderate resistance, and 6 points for sensitivity, PMR2 was not identified in the entire band, and PMR5 was identified as 18 point for resistance, 3 points for moderate resistance, and 9 points for sensitivity. As a result, when comparing the phenotype test results and genotype test results, CmbHLH87 and LOC111453072 genes was 100% consistent in resistance and moderate resistance, PMR1 was 95.2% in resistance, 44.4% in moderate resistance, and PMR5 was 90% in resistance and 33.3% in moderate resistance, PMR2 was not consistent in resistance and moderate resistance. Therefore, it is expected that more accurate PMR test will be possible by using molecular markers(PMR1, PMR5) and by developing CmbHLH87 and LOC111453072 gene-related molecular markers.

• Journal of Magnetics
• /
• v.11 no.2
• /
• pp.83-86
• /
• 2006

Controlling magnetic domains in soft underlayer (SUL) of perpendicular magnetic recording (PMR) is an important issue for the application of PMR in HDD. We studied the magnetic domain structures in SUL using the finite element based micromagnetic simulation (FEMM) for the SUL models with different thicknesses. The purpose is to simulate the magnetic domain wall noise when the SUL thickness and saturation magnetization are changed. The simulation results show that a 15 nm SUL forms simpler Neel wall domain wall pattern and 40 nm SUL forms complex Bloch wall. To visualize the effect of these domain walls stray field at a read sensor position, the magnetic stray field of the domain walls at air bearing surface (ABS) which is 50 nm above the SUL was simulated and the results imply that Bloch walls have stronger stray field with more complicated field patterns than Neel walls and this becomes a significant noise source. Therefore, the thickness of the SUL should be controlled to avoid the formation of Bloch walls.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1C
• /
• pp.15-20
• /
• 2009

For perpendicular magnetic recording (PMR) channels, noise-predictive maximum likelihood (NPML) detection method has been used. But, it is hard to expect improving the performance when the bit density is increased. Hence, we exploit the coding methods which has good performance. In this paper, we show the performance of the recursive systematic convolutional (RSC) codes with turbo-equalization method with different channel bit densities. The noise model is 80% jitter noise and 20% AWGN.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.3
• /
• pp.249-254
• /
• 2009

This paper studies the problem of pole placement by an LQ controller for system having two distinct real poles. Using the so-called Pole's Moving Range (PMR) drawn in the s-plane and relational equations between closed-loop system poles and weighting matrices, we calculate the state weighting matrix to move two distinct real poles to a pair of complex poles. By numerical examples, we show that the proposed method is applied to improve system performance.

• Korean Journal of Pharmacognosy
• /
• v.17 no.1
• /
• pp.62-66
• /
• 1986

Acanthopanax koreanum Nakai (Araliaceae) is a indigenous medicinal plant growing throughout Jeju-Do in Korea. The plant extract is used in rheumatism, tonic, paralysis and sedative agent. From the roots of A. koreanum, lignan compounds, a diterpenoid, and a polyacetylene compound were isolated and their structures were elucidated by using IR, PMR, CMR and MS spectral data.

• Journal of Bio-Environment Control
• /
• v.29 no.4
• /
• pp.406-413
• /
• 2020

This study was conducted to find out optimum fruiting node order, pinching node order, and harvesting time in hydroponics using coir substrates to produce high quality melon (Cucumis melo L.) fruit. Three plants per coir slab (100 × 20 × 10 cm) were planted for each treatment. Yamazaki standard nutrient solutions for melon were supplied with 1.8, 2.0, and 2.3 dS·m^-1 at the early, middle (fruit enlargement step), and late growth stages, respectively. Two cultivars of 'PMR Dalgona' and 'Earl's Aibi' were used for fruiting node order and pinching node order experiments. Fruiting node treatments were conducted three replications (8-10 ^th, 11-13 ^th, and 14-15 ^th nodes) and pinching node treatments treated with three replications (18 ^th, 21 ^th, and 24 ^th nodes). Two cultivars of 'PMR Dalgona' and 'Earl's Crown' were used for fruit harvesting time experiment and treated with in four replications (45, 50, 55, and 60 days after fruiting). In growth characteristics, the leaf width and leaf area of 'PMR Dalgona' were the greatest 28.2 cm and 10,845 ㎠. Respectively, 11-13 ^th fruiting nodes or more. The node length of 'Earl's Aibi' was the longest by 147.6 cm at 11-13 ^th fruiting nodes. For fruit quality characteristics, the fruit weight of 'Earl's Aibi' at 11-13 ^th fruiting node fruiting was the greatest by 2.0 kg. The soluble solids content (SSC) of 'PMR Dalgona' was the highest by 14.5 °Brix at 8-10 ^th nodes in fruiting node orders and 14.5 °Brix at the 24 ^th pinching node order, respectively with significant difference. The SSC tends to increase in the same for both cultivars of 'PMR Dalgona' and 'Earl's Aibi' as the position of fruiting node was lower. The SSC and fruit weight of melon harvested at 55-60 days after fruiting was the best. From the results of this study, most of SSC tends to increase in the lower position of fruiting node order and the higher pinching node order, whereas the fruit weight shows a tendency of increasing with higher fruiting node. In addition, the SSC of fruit increased as the number of days after fruiting increased, and further research is needed for more various cultivars. In melon hydroponics using coir substrates, it is needed to figure out the characteristics of each cultivar to determine optimum fruiting node order, pinching node order, and fruit harvest time.