• Advances in Energy Research
• /
• v.4 no.1
• /
• pp.69-86
• /
• 2016

The quest to reduce the level of overdependence on fossil fuel product and to provide all required information on proven existing alternatives for renewable energy has resulted into rapid growth of research globally to identify efficient alternative renewable energy sources and the process technologies that are sustainable and environmentally friendly. The present study is aimed at production and characterization of bioethanol produced from sugarcane juice using a $2^4$ factorial design investigating the effect of four parameters (reaction temperature, time, concentration of bacteria used and amount of substrate). The optimum bioethanol yield of 19.3% was achieved at a reaction temperature of $30^{\circ}C$, time of 72 hours, yeast concentration of 2 g and 300 g concentration of substrate (sugarcane juice). The result of statistical analysis of variance shows that the concentration of yeast had the highest effect of 7.325 and % contribution of 82.72% while the substrate concentration had the lowest effect and % contribution of -0.25 and 0.096% respectively. The bioethanol produced was then characterized for some fuel properties such as flash point, specific gravity, cloud point, pour point, sulphur content, acidity, density and kinematic viscosity. The results of bioethanol characterization conform to American society for testing and materials (ASTM) standard. Hence, sugarcane juice is a good and sustainable feedstock for bioethanol production in Nigeria owing relative abundance, cheap source of supply and available land for large scale production.

• Korean Chemical Engineering Research
• /
• v.49 no.3
• /
• pp.325-329
• /
• 2011

$Ir(pmb)_{3}$(Iridium(III)Tri(1-phenyl-3-methylbenzimidazolin-2-ylidene-$C,C^{2'}$ ) was synthesized to develop a deep blue-emitting Ir(III) complex. We suggested the ultrasonic reactor to enhance the poor reaction yield of $Ir(pmb)_{3}$. The ultrasonic wave enhanced the reaction yield of $Ir(pmb)_{3}$ because the ultrasound helped non-soluble reactants disperse efficiently and produced free radial during the reaction. The maximum yield of $Ir(pmb)_{3}$ was 42.5%, which was 4 times higher than conventional method. Organic light emitting devices were fabricated with the synthesized mer-$Ir(pmb)_{3}$ which emitted at 405 nm. A range of host materials with large bandgaps (UGH2, mCP and CBP) were tested for developing a deep blue emitting device. In case of the device with mCP as the host material, it emitted deep blue and performed quite well relative to the other host materials tested.

• The Korean Journal of Ceramics
• /
• v.4 no.4
• /
• pp.345-351
• /
• 1998

Thermal shock resistance of $Al_2O_3$- and Fe-$Al_2TiO_5$-based Castable Refractories was studied using a central heating technique. Ring type specimens, 10mm thick and 20 and 100mm inner and outer diameters, respectively, were rapidly heated on the internal surface of the centre hole using a high power electrical heating element. The temperature field was measured experimentally and modelled using finite element analysis (FEA). The thermal stress field was also modelled using FEA. A radial notch was introduced to the ring specimens to enable calculation of the thermal stress intensity factors (SIF). A special LVDT device was incorporated in the thermal shock tester to monitor crack mouth opening displacement (COD). The thermal shock fracture initiation and crack propagation behaviour of the castable refractories were ascertained using the COD measurements and the fracture mechanics analysis data.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.533-538
• /
• 2005

An outline of an Artificial Neural Network (ANN) model for bridge condition rating and the results of a pilot study are presented in this paper. Most BMS implementation systems involve an extensive range of data collection to operate accurately. It takes many years to effectively implement a BMS using existing methodologies. This is due to unmatched data requirements. Such problems can be overcome by adopting the ANN model presented in this paper. The objective of the proposed model is to predict bridge condition ratings using historical bridge inspection data for effective BMS operation.

• The Korean Journal of Pharmacology
• /
• v.31 no.2
• /
• pp.145-152
• /
• 1995

The effects and interactions of $4{\beta}-phorbol$ 12,13-dibutyrate(PDB) and polymyxin B(PMB) with adenosine on the electrically-evoked norepinephrine (NE) release were studied in the rat hippocampus. Slices from the rat hippocampus were equilibrated with $^3H-noradrenaline$ and the release of the labelled product, $^3H-NE$, which evoked by electrical stimulation$(3\;Hz,\;2\;ms,\;5\;VCm^{-1},\;rectangular\;pulses)$ was measured. PDB$(0.3{\sim}10\;{\mu}M)$, a selective protein kinase C(PKC) activator, increased the evoked NE release in a dose related fashion while increasing the basal rate of release. And the effects of $1\;{\mu}M$ PDB were significantly inhibited by $0.3\;{\mu}M$ tetrodotoxin(TTX) pretreatment or $Ca^{++}-free$ medium. $PMB(0.03{\sim}1\;mg)$, a specific PKC inhibitor, decreased the NE release in a dose dependent manner while increasing the basal rate of release. Adenosine $(1{\sim}10\;{\mu}M)$ decreased the NE release without changing the basal rate of release, and this effect was significantly inhibited by 8-cyclopentyl-1,3-dipropylxanthine$(2\;{\mu}M)$, a selective $A_1-receptor$ antagonist, treatment. Also, adenosine effects were significantly inhibited by PDB-and PMB-pretreatment. These results suggest that the PKC plays a role in the NE release in the rat hippocampus and might be participated in a post-receptor mechanism of the $A_1-adenosine$ receptor.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.3
• /
• pp.39-49
• /
• 2021

The Korean Air-Force aircraft maintenance depot paints the exterior of various aircraft, including high-tech fighters. Aircraft exterior painting is a maintenance process for long-term life management by preventing damage to the aircraft surface due to corrosion. The de-painting process is essential to ensure the quality of aircraft exterior paints. However, because the Korean Air-Force's de-painting process is currently done with sanding or Plastic Media Blasting (PMB) method, it is exposed to harmful dust and harmful compounds and consumes a lot of manpower. This study compares the de-painting process currently applied by the ROK Air-Force and the more improved process of the US Air Force, and performs economic analysis for the introduction of advanced equipment. It aims to provide information that can determine the optimal time to introduce new facilities through Cost-Volume-Profit (CVP) analysis. As a result of the analysis, it was confirmed that the sanding method had the most economical efficiency up to 2 units per year, the PMB method from 3 to 21 units, and the laser method from 22 units or more. In addition, in a situation where the amount of de-painting work is expected to increase significantly due to the increase in fighters in future, BEP analysis was conducted on the expansion of the existing PMB method and the introduction of a new laser method. As a result of the analysis, it was confirmed that it is more economical to introduce the laser method when the amount of work exceeds the PMB work capacity(18 units per year). The paper would helpful to improve the productivity and quality of the Korean Air Force Aircraft maintenance depot through timely changes of facilities in the workplace in preparation for expansion.

• Journal of the Korean Society of Radiology
• /
• v.84 no.3
• /
• pp.763-769
• /
• 2023

Primary malignant melanoma in breast parenchyma (PMB) is an extremely rare disease, and the most common presentation is a palpable breast lump. To the best of our knowledge, a case of PMB presenting as a breast abscess has not been reported in English literatures. We present a case of PMB that manifested as a recurrent breast abscess in a 71-year-old woman. On MRI, an enhancing solid mass with a cystic or necrotic portion was revealed with some high signal intensities on precontrast-enhanced T1-weighted images and a dark rim on T2-weighed images. The MRI features played a pivotal role in identifying the underlying malignant condition and making an accurate diagnosis of this rare case of PMB with unusual clinical presentation.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.5
• /
• pp.760-766
• /
• 2016

To increase the collagen recovery rate, bromelain (PB) and a microbial enzyme (PM) were used to treat to pork skin with single agent or combinations. The quality of collagen from the pork skin was evaluated by enzymatic treatments. The highest results for the solid contents and pork skin recovery rate obtained with the microbial-enzyme-bromelain mixtue (PMB) were 13.60% and 18.05% respectively. The result also showed that the color was affected by different types of enzyme treatments. Although PM treatment showed the highest result in the protein content of 251.30 mg/100 g, PMB treatment was the highest in the test of collagen content of 37.73 g/100 g among the treatments. However bands of the pork skin were detected widely at 130 kDa and 170 kDa ranges in SDS-PAGE. The band of PB treatment showed at the range of below 17 kDa, changed into a smaller molecular weight. The collagen content test of the pork skin by the treatments, collagen contents with combination treatment of pork skin with PMB (0.5%) resulted the highest in 43.76 g/100 g. Also the fat content at the above treatment was reduced to 11.12% compared to the other treatments. With these results of this experiment, we conclude that the enzymatic treatments were effective for the processing property of pork skin like enhancing the yield of collagen.

• Journal of Conservation Science
• /
• v.27 no.4
• /
• pp.395-401
• /
• 2011

After pressurized impregnation treatment, which has been proposed as an effective conservation method for stone cultural property, was executed with methyl metacrylate (MMA), MMA-butyl acrylate (PMB73) mixture and MMA-vinyl trimethoxy silane (PMV5) co-monomer mixture, the physical-chemical properties on the sand stone and the granite impregnated were evaluated. Compared to the case of granite, the impregnation ratios of sand stone showed larger values in the range of 3.2 to 3.7 wt% and these were increased up to 32% when the decompression process was applied to autoclave. The physical properties of sand stone such as anti-moisture property, flexural strength, impact property and ultrasonic velocity were also higher values than those of granite, which can be interpreted by high impregnation ratio resulted in many void within sand stone. The impact failure energy was 1.22 J for PMMA, 1.84 J for PMB73, and 2.8 J for PMV5, respectively. Since the inorganic affinity of treatment agent is more effective than the molecular structure of acrylic agent, PMV5 improved inorganic property indicates the optimum impact property.

• 한국초전도학회:학술대회논문집
• /
• v.15
• /
• pp.98-98
• /
• 2005