• 제목/요약/키워드: PM10 Flow

검색결과 844건 처리시간 0.024초

속가슴동맥 편 및 속가슴동맥-노동맥 복합이식편의 자유혈류 (Free Flow in Internal Thoracic Artery and Internal Thoracic Artery-Radial Artery Composite Graft)

  • 고광표;이미경;류대웅;이삼윤;최종범
    • Journal of Chest Surgery
    • /
    • 제37권10호
    • /
    • pp.839-844
    • /
    • 2004
  • 배경 및 목적: 속가슴동맥 편과 유리 노동맥 편의 Y-복합이식편은 관상동맥우회 술에 많이 이용된다. 이 연구의 목적은 속가슴동맥 편의 혈류를 증가시킬 수 있는 방법을 찾고 Y-복합이식편의 혈류역학을 알고자 함이다. 대상 및 방법: 관상동맥우회 술을 받은 15예에서 속가슴동맥 편을 두 가지 방법으로 처치하여 속가슴동맥 혈류량을 측정하였다. 7예에서는 혈관 외부에만 파파베린 액을 처치하였고 8예에서는 혈관 내로 파파베린 액을 주입하였다. 다른 18예에서는 속가슴동맥 편과 유리 노동맥 편으로 Y-복합이식편을 만들어 사용하였고 그 자유 혈류량과 두 분지의 혈류 변화를 조사하였다. 결과: 속가슴동맥 편의 혈관 내로 파파베린을 주사한 경우는 혈관외부에 파파베린을 처치한 경우보다 약 2배의 자유혈류량을 얻을 수 있었다(47.7$\pm$9.6 mL/min와 100.8$\pm$26.3 mL/min, p<0.001). Y-복합이식편의 양측을 다 연 상태에서 총 자유혈류량은 속가슴동맥 측만을 열었을 때나 노동맥 측만을 열었을 경우보다 훨씬 많았다(173.3$\pm$45.3 mL/min와 121.1$\pm$34.3 mL/min 혹은 117.5$\pm$42.8 mL/min, 각각 p<0.001). Y-복합이식편의 양 분지를 다 연 경우 양측의 혈류량은 차이가 없었다(85.4$\pm$27.8 mL/min와 87.9$\pm$42.4 mL/min, p=0.772). Y-복합이식편에서 한 측의 혈류량은 다른 측을 열 때보다 막을 때 훨씬 많았다. 결론: 속가슴동맥 편의 혈관 내에 파파베린 액을 주입하는 방법은 자유혈류량을 올릴 수 있는 매우 효과적인 방법이다. 속가슴동맥 편과 유리 노동맥 편의 Y-복합이식편은 속가슴동맥의 단독이식편보다 더 많은 자유혈류량을 보이며, Y-복합이식편의 한 측의 혈류량은 다른 측의 혈류량의 변화에 따라 변할 수 있다.

비상발전기용 PM/NOX 저감장치의 유동특성 연구 (Flow Analysis of PM/NOX Reduction System for Emergency Generator)

  • 방효원;박기영;이성욱
    • 한국분무공학회지
    • /
    • 제26권4호
    • /
    • pp.163-170
    • /
    • 2021
  • Emergency generators normally use diesel engines. The generators need to conduct weekly no-load operation inspections to ensure stable performance at emergency situations. In particular, the generators with large diesel engines mainly use rectangle type filter substrates. In order to minimize hazardous emissions generated by generators, optimizing the reduction efficiency through CFD analysis of flow characteristics of PM/NOX reduction system is important. In this study, we analyzed internal flow by CFD, which is difficult to confirm by experimental method. The main factors in our numerical study are the changes of flow uniformity and back pressure. Therefore, changes in flow characteristics were studied according to urea injector locations, selective catalyst reduction (SCR) diffuser angle, and filter porosity.

흰쥐의 적출 작업성 심장에서 허혈성 심정지시 Fructose-1.6-diphosphate(FDP)의 심근보호 작용 (Improved Myoardial Protection by Addition of Fructose-1.6-diphosphate to Crystalloid Cardioplegic Solution in the Isolated Working Rat Heart)

  • 나국주
    • Journal of Chest Surgery
    • /
    • 제23권4호
    • /
    • pp.646-653
    • /
    • 1990
  • Currently numerous methods are in use for myocardial protection from the ravages of ischemia and hypoxia. This study was designed to compare with FDP-GIK[Group II, n=8] and GIK cardioplegic solution[Group I, n=8] in ability of myocardial protection and was examined in the isolated working rat heart subjected to long period[120 min] of hypothermic[10 - 15K] ischemic arrest with multidose[every 30 min] cardioplegic infusion. During postischemic reperfusion period 20 min, hemodynamic functions[aortic flow, coronary flow, peak aortic pressure, cardiac output, heart rate], biochemical enzymatic & electrical activities were evaluated. The time from onset of reperfusion to the return of regular sinus rhythm was significantly reduced from 87$\pm$3 sec to 17$\pm$2 sec[P<0.05]. The postischemic recovery of aortic flow was better in the group II [95.1$\pm$3.3% of its preischemic control level] than in the Group I [75.4$\pm$6.8%] [P<0.05]. Cardiac output and stroke volume was also better in the group[91.3$\pm$1.6%, 89.4$\pm$2.6%, respectively] than in the Group I [79.1$\pm$3.7%, 77.0$\pm$4.8%, respectively] [P<0. 05]. Creatine kinase leakage was also significantly reduced from 33.8$\pm$4.9 IU /10 min / gm * dry weight to 15.4$\pm$3.6 IU /10 min /gm * dry weight[P<0.05]. It is suggested that adding FDP to GIK cardioplegic solution improves its ability to protect the heart against long period of hypoxic ischemia.

  • PDF

PSCF 모델을 활용한 부산지역 PM10의 발생원 추정 (Estimation of PM10 source locations in Busan using PSCF model)

  • 도우곤;정우식
    • 한국환경과학회지
    • /
    • 제24권6호
    • /
    • pp.793-806
    • /
    • 2015
  • The purpose of this study is to find out the air flow patterns affecting the PM10 concentration in Busan and the potential sources within each trajectory pattern. The synoptic air flow trajectories are classified into four clusters by HYSPLIT model and the potential sources of PM10 are estimated by PSCF model for each cluster from 2008 to 2012. The potential source locations of PM10 are compared with the distribution of PM10 anthropogenic emissions in east Asia developed in 2006 for the NASA INTEX-B mission. The annual mean concentrations of PM10 in Busan decreased from $51ug/m^3$ in 2008 to $43ug/m^3$ in 2012. The monthly mean concentrations of PM10 were high during a spring season, March to May and low during a summer season, August and September. The cluster2 composed of the air trajectories from the eastern China to Busan through the west sea showed the highest frequency, 44 %. The cluster1 composed of the air trajectories from the inner Mongolia region to Busan through the northeast area of China showed the second high frequency, 26 %. The cluster3 and 4 were composed of the trajectories originated in the southeast sea and the east sea of Busan respectively and showed low frequencies. The concentrations of in each cluster were $47ug/m^3$ in cluster1, $56ug/m^3$ in cluster2, $42ug/m^3$ in cluster3 and $37ug/m^3$ in cluster4. From these results, it was proved that the cluster1 and 2 composed of the trajectories originated in the east and northeast area of China were the causes of high PM10 concentrations in Busan. The results of PSCF and CWT model showed that the potential sources of the high PM10 concentrations were the areas of the around Mongolia and the eastern China having high emissions of PM10 from Beijing, Hebei to Shanghai through Shandong, Jiangsu.

Laser Doppler Flowmetry를 이용한 치은혈류량에 관한 연구 (A study of gingival blood flow using laser Doppler flowmetry)

  • 김형수;이장희;송형근;김병옥;한경윤
    • Journal of Periodontal and Implant Science
    • /
    • 제28권2호
    • /
    • pp.309-320
    • /
    • 1998
  • The periodontal health has been evaluated clinically by various epidemiological indices, and in researches by measurement of gingival crevicular fluid. Laser Doppler flowmetry is a reliable and objective method that allows immediate measurement of erythrocyte flux in approximately one cubic mm of the capillary bed without disturbing the tissues. The purpose of the present study was to determine whether human gingival blood flow was different according to measuring area, measuring time, and sex or not. Forty volunteers with good general and periodontal health, aged early twenties and unmarried, were selected. Laser Doppler flowmetry($floLAB^{(R)}$, Moor Instruments Ltd., England) was applied to measure the gingival blood flow of marginal gingiva, interdental papilla, attached gingiva and alveolar mucosa. The blood flow of interdental papilla was measured at 9-10 AM, 1-2 PM, and 5-6 PM. The difference of blood flow according to measuring area and measuring time was statistically analyzed by one way AOVA and Dunkan test, and the difference of blood flow between men and women was statistically analyzed by t-test. (1) Mean blood flow was significantly higher in alveolar mucosa than in the gingiva(p<0.05), and there was no significant difference in blood flow between marginal gingiva and interdental papilla(p>0.1). (2) Mean blood flow was significantly higher at 5-6 PM than at 9-10 AM and 1-2 PM(p<0.05). But there was no significant difference in gingival blood flow between 9-10 AM and 1-2 PM(p>0.1). (3) There was no significant difference in gingival blood flow between men and women(p>0.1). The above results suggest that the measurment of gingival blood flow using laser Doppler flowmetry may be clinically applicable to early determination of gingival inflammation and evaluation of healing status, but further studies are necessary to standardize and simplify the measuring procedure.

  • PDF

지하철 모사터널에서 에어커튼을 이용한 환기구의 배기효율 및 미세입자 농도 변화 연구 (The Study on Changes of Exhaust Efficiency and Fine Particle Concentration at a Ventilation Opening by a Air Curtain Flow in a Subway Model Tunnel)

  • 한방우;김학준;김용진;정상현;김용민;김종률
    • 한국대기환경학회지
    • /
    • 제27권5호
    • /
    • pp.614-622
    • /
    • 2011
  • In this study, a new tunnel ventilation method with a high velocity air curtain flow has been investigated for improving the ventilation exhaust efficiency and removing air pollutants in subway tunnels. At upper or lower position right downstream of a main duct connected with a ventilation opening, air curtain flows were suppled into the main duct where the air flow velocity was in the range of 2~6 m/s. Exhaust efficiency was monitored for both cases with and without air curtain flow for different air velocities, locations and injection angles of the air curtain. Particulate matter concentrations (PM10, PM2.5 and PM1.0) were also checked at both the main duct and ventilation opening before and after supplying air curtain flows. Lower air velocity of the main duct flow, higher air velocity of the air curtain led to higher exhaust efficiency and the air curtain condition of 30..inclined injection toward the main flow showed the maximum exhaust efficiency. The exhaust efficiency of about 24% without the air curtain could be improved to about 34% after using the air curtain flow. PM concentration decreased at the main duct and increased at the ventilation opening after using the air curtain flow. Therefore, the suggested method to use air curtain flows in tunnels will be probably one of the promising tools to reduce air pollutants in subway tunnels.

측정 방법에 따른 PM2.5 농도 비교 (Comparison of PM2.5 Concentrations by Measurement Method)

  • 김영성;최용주;박지수;김필호;한유경
    • 한국대기환경학회지
    • /
    • 제33권5호
    • /
    • pp.515-520
    • /
    • 2017
  • $PM_{2.5}$ concentrations were measured using a cyclone, impactor (the U.S. Environmental Protection Agency well impactor ninety-six, WINS) and optical particle counter (OPC) at a campus site located in Yongin for the period August 2014 through March 2017. The concentrations from cyclone (Y) were generally higher than those from impactor(X); the best-fit line was Y=1.22X+5.64. The ratios of $PM_{2.5}/PM_{10}$ ranged from 0.61 to 0.66 when $PM_{2.5}$ concentrations from cyclones in selected studies were converted into those from impactors using a regression equation in this study. The slope of the best-fit line between OPC and impactor was close to 1 at 0.95, while that between OPC and cyclone was 0.72. After sampling, the flow rate in the low-volume air sampler with cyclone decreased by 3% on average, which did not have a significant effect on measured concentrations.

성상신경절 차단후 중뇌동맥의 혈류 속도 변화 (Changes in Blood Flow Velocity of Middle Cerebral Artery After Stellate Ganglion Block)

  • 서영선;김승희;허철령;이경진;이숙영;김창호;김찬;이영석;이동철
    • The Korean Journal of Pain
    • /
    • 제9권1호
    • /
    • pp.57-62
    • /
    • 1996
  • Stellate ganglion block(SGB) improves cutaneous blood flow of the head and neck region and upper extremity. For this reason, SGB has been performed in neural and circulatory disorders. But there is controversy on the cerebral blood flow regulation by sympathetic innervation. We investigated the hypothesis that cerebral blood flow could be affected by blocking ipsilateral sympathetic innervation of cerebral blood flow could be affected by blocking ipsilateral sympathetic innervation of cerebral vasculature. In 10 volunteers, the blood flow velocity and pulsatility index(PI) of middle cerebral artery(MCA) was measured using Transcranial Doppler Flowmeter, before and 15 minutes after SGB, at block side and opposite side. The blood flow velocity of MCA at block side was increased from $62.60{\pm}7.60$ cm/s to $72.80{\pm}8.01$ cm/s(P<0.01) and the PI at block side decreased from $0.75{\pm}0.12$ to $0.60{\pm}0.11$(P<0.05). But the blood flow velocity and PI at opposite side did not change. This study demonstrated that the cerebral blood flow could be increased by SGB, the preganglionic nerve fibers of which synapse with other cervical sympathetic ganglions.

  • PDF

PET/CT 검사에서 Flow mode를 적용한 Respiratory Gating Method 촬영과 추가 Gating 촬영의 비교 및 유용성 평가 (Comparison and Evaluation of the Effectiveness between Respiratory Gating Method Applying The Flow Mode and Additional Gated Method in PET/CT Scanning.)

  • 장동훈;김경훈;이진형;조현덕;박소현;박영재;이인원
    • 핵의학기술
    • /
    • 제21권1호
    • /
    • pp.54-59
    • /
    • 2017
  • 폐암(Lung cancer) 환자의 경우 PET/CT 검사에서 호흡으로 인하여 영상의 정합오차가 발생하게 되는데 이로 인해 정확한 SUV 와 Tumor volume측정을 방해하는 요인으로 작용된다. $SUV_{max}$를 이용하여 폐암 환자의 수술 후 예측 및 항암화학요법의 효과를 평가하고 있으며, 방사선치료의 예후 예측 및 평가를 위해 현재 Tumor volume과 SUV를 이용한 지표가 사용되고 있다. 그렇기 때문에 정합오차를 줄이기 위해 본원에서는 Respiratory gating method를 적용하여 검사를 시행하고 있다. 본 연구는 Step and Go 방식이 아닌 Flow mode를 적용하여 Non-gating 영상과 첫 번째 Respiratory Gating영상, 그리고 추가로 부분 Respiratory gating 촬영하여 Respiratory gating method의 유용성에대해 알아보았다. 2016년 6월부터 2016년 9월까지 분당서울대학교병원에서 PET/CT 검사를 한 폐암 환자 20명(남:12명, 여:8명)을 대상으로 amplitude rang 15% 미만인 호흡이 안정한 환자군 10명 15%초과한 호흡이 불안정한 환자군 10명으로 나누어 비교분석하였다. 전체 환자에서 Non-gating 영상의 $SUV_{max}$$9.43{\pm}3.93$, $SUV_{mean}$$1.77{\pm}0.89$, Tumor Volume은 $4.17{\pm}2.41$로 측정되었고 기존 Gating 영상에서 $SUV_{max}$$10.08{\pm}4.07$, $SUV_{mean}$$1.75{\pm}0.81$, Tumor Volume은 $3.56{\pm}2.11$로 측정되었다. 그리고 추가 Lung gating 영상에서 $SUV_{max}$$10.86{\pm}4.36$, $SUV_{mean}$$1.77{\pm}0.85$, Tumor volume은 $3.36{\pm}1.98$을 얻었다. Non-gating 영상과 기존 Gating 영상, 그리고 기존 Gating 영상과 추가 Lung gating 영상을 비교했을 때 둘 다 $SUV_{mean}$ 값에서 통계적으로 유의한 차이를 보이지 않았으나(P>0.05) $SUV_{max}$와 Tumor volume에서 유의한 차이를 보였다(P<0.05). 그중 호흡이 안정한 환자군보다 호흡이 불안정한 환자군에서의 증감률이 더 크게 나타났다. Amplitude range 폭은 전체 20명 중 12명(Signal이 안정된 환자 3명 불안정한 환자 9명)이 추가 Lung gating을 했을 때 기존 Gating 영상보다 더 낮게 나타났다. 본 연구에 의하면 Flow mode를 적용하여 Respiration Gating Method로 촬영한 결과 추가적인 CT 촬영 없이 호흡으로 인해 발생하는 병변의 움직임을 보정해 주어 $SUV_{max}$, Tumor volume을 Non-gating 영상보다 더 정확하게 측정할 수 있었다. 그리고 처음 Gating 할 때보다 추가 촬영 시 호흡의 안정에 따른 Amplitude range 폭의 낮아짐을 알 수 있었다. 따라서 Gating 영상이 Non-gating 영상보다 진단에 더 유용한 정보를 제공함을 알 수 있었고, Signal이 불규칙적인 환자에게 시간적 여유가 있다면 추가로 부분 촬영을 하는 것이 도움이 될 것이라고 사료된다.

  • PDF

Lung Function of Grain Millers Exposed to Grain Dust and Diesel Exhaust in Two Food Markets in Ibadan Metropolis, Nigeria

  • Iyogun, Kemi;Lateef, Suraju A.;Ana, Godson R.E.E.
    • Safety and Health at Work
    • /
    • 제10권1호
    • /
    • pp.47-53
    • /
    • 2019
  • Background: Despite growing concern over occupational exposure to particulate matter (PM) such as grain dust and diesel exhaust, information about the exposure level and health implications among workers in small-scale milling enterprises in developing countries like Nigeria has not been adequately documented. The purpose of this study was to assess the level of exposure to grain dust and diesel exhaust and effect on lung function among grain millers in food markets in Ibadan metropolis, Nigeria. Methods: The study adopted descriptive cross-sectional design with a comparative approach. Sixteen grain milling shops each were randomly selected from two major food markets in Ibadan metropolis for indoor $PM_{10}$ and $PM_{2.5}$ monitoring. Seventy-two respondents each were proportionately selected from grain millers and shop owners for forced expiratory volume in one second and peak expiratory flow rate tests. Results: The $PM_{2.5}$ concentrations for both market locations ranged between 1,269.3 and $651.7{\mu}g/m^3$, while $PM_{10}$ concentrations were between 1,048.2 and $818.1{\mu}g/m^3$. The recorded concentrations exceeded the World Health Organization guideline limit of $50{\mu}g/m^3$ and $25{\mu}g/m^3$ for $PM_{2.5}$ and $PM_{10}$, respectively. As compared with control group (2.1 L), significantly lower forced expiratory volume in one second value (1.61 L) was observed among the exposed group (p < 0.05). Likewise, significantly lower peak expiratory flow rate value (186.7 L/min) was recorded among the exposed group than the control group (269.51 L/min) (p < 0.05). Conclusion: Exposure to grain dust and diesel exhaust accentuated respiratory disorders with declines in lung functions amongst grain millers. Improved milling practices and engaging cleaner milling facilities should be adopted to minimize exposure and related hazards.