• Journal of the Korean Ceramic Society
• /
• v.38 no.4
• /
• pp.370-379
• /
• 2001

PLD(pulsed laser deposition) 기법을 이용하여 LaAl $O_3$(100) 기판 위에 L $a_{0.67}$ $A_{0.33}$Mn $O_{3-{\delta}}$ (A=Ca, Sr, Ba) 에피 박막을 성장하였다. 박막의 격자 상수 및 스트레인 상태는 GID(grazing incidence X-ray diffraction)법과 투과 전자 현미경 법을 이용하여 조사하였다. 박막의 <001> 방향은 기판 표면의 수직방향에 평행하게 놓였으며, 박막의 단위포는 기판과의 격자 불일치에 기인하여 a/c=0.98인 의사-정방정 페롭스카이트(pseudo-tetragonal perovskite) 구조를 가졌다. A 자리의 양이온 반경이 증가함에 따라 단위포의 체적, $\varepsilon$$^{∥}$, 그리고 $\varepsilon$$_{⊥}$이 각각 증가하였다. L $a_{0.67}$ $A_{0.33}$Mn $O_{3-{\delta}}$ (A=Ca, Sr, Ba) 박막의 온도 및 자장에 따른 전기 전도 특성 MR(%), Tc, $T_{MI}$ 들을 조사하였으며, 이 결과들을 박막의 구조적 특성과 상관하여 고찰하였다.여 고찰하였다.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.297-300
• /
• 2002

Application of electronic nose and PLD chip design was developed to be used in gas discrimination system for limited kinds of gas. An array of 4 metal oxide gas sensors with different selectivity patterns were used in order to measure gases. BP(Back Propagation) algorithm was designed and implemented on CPLD of two hundred thousand gate level chips by VHDL language for processing input signals from 4 kinds of gas sensors. This module successfully discriminated 4 kinds of gases and displayed the results on LCD and LED. The developed module could be used for various applications in the field of food process control and alcohol judgment.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.4
• /
• pp.269-273
• /
• 2001

W fabricated thin film using Na$_{0.5}$K$_{0.5}$NbO$_3$ volatile material by pulsed laser deposition (PLD) and studied characterization from EM, XRD, P-E. The density and scale of droplet, which is the defect of PLD, was investigated by SEM but large droplet was not found. The degree of assemble oriented C-axis measured with X-ray diffraction suggests that this film oriented C-axis achieved by $\theta$-2$\theta$ scan and rocking curves shows good self-assemble phenomenon, finally $\phi$-scan does that all of the four directions of the lattice in film equals to those of substrate. P-E hysteresis loop shows residual remnant polarization or saturation polarization value, but it is applicable to memories.ies.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.33.1-35
• /
• 2000

Na-K-Nb system showed a number of ferroelectric phases in bulk ceramic. [001]-axis oriented single-phase $Na_{0.5}/K_{0.5}NbO_3$(NKN) thin film have been grown on $LaA1O_3$substrates using KrF excimer laser. X-ray diffraction $\theta$-2$\theta$ scan, rocking curves, and $\varphi$ scan data evidence highly c-axis oriented along the [001] direction.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.138-143
• /
• 2004

Recently there has been a great world-wide interest in developing and characterizing new nano-structured materials. These newly developed materials are often prepared in limited quantities and shapes unsuitable for the extensive mechanical testing. The development of depth sensing indentation methods have introduced the advantage of load and depth measurement during the indentation cycle. In the present work, ZnO thin films are prepared on Si(111), Si(100) substrates at different temperatures by pulsed laser deposition(PLD) method. Because the potential energy in c-axis is low, the films always show c-axis orientation at the optimized conditions in spite of the different substrates. Thin films are investigated by X-ray diffractometer and Nano indentation equipment. From these measurements it is possible to get elastic modulus and hardness of ZnO thin films on Si substrates.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.33-35
• /
• 2000

Na-K-Nb system showed a number of ferroelectric phases in bulk ceramic. [001]-axis oriented single-phase Na$_{0.5}$K$_{0.5}$NbO$_3$ (NKN) thin film have been grown on LaA1O$_3$ substrates using KrF excimer laser. X-ray diffraction $\theta$-2$\theta$ scan, rocking curves, and $\phi$ scan data evidence highly c-axis oriented along the [001] direction.ion.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.4
• /
• pp.285-292
• /
• 2007

SoC which deploys software modules as well as hardware IPs on a single chip is a major revolution taking place in the implementation of a system design, and high-level synthesis is an important process of SoC design methodology. Recently, SPARK parallelizing high-level synthesis software tool has been developed. It takes a behavioral ANSI-C code as an input, schedules it using code motion and various code transformations, and then finally generates synthesizable RTL VHDL code. Although SPARK employs various loop transformation algorithms, the synthesis results generated by SPARK are not acceptable for basic signal and image processing algorithms with nested loop. In this paper we propose a SoC platform with an application-specific PLD targeting local operations which are feature of many loop algorithms used in signal and image processing, and demonstrate design process which maps behavioral specification with nested loops written in a high-level language (ANSI-C) onto 2D systolic array. Finally the derived systolic array is implemented on the proposed application-specific PLD of SoC platform.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.4
• /
• pp.41-44
• /
• 2014

In this paper, we will investigate the activation energies of Nb for $TiO_2$ using Hall effect measurement and photoluminescence (PL) system. Nb-doped $TiO_2$ thin film was grown on $SrTiO_3$ substrate by pulsed laser deposition (PLD) technique. After measurements, activation energies of niobium donor were 14.52 meV in Hall effect measurement, and 6.72 meV in PL measurement, respectively. These results showed different tendencies which are measured from the samples with acceptor materials. Therefore, it is thought that more research on activation energies for dopants of shallow donor level is expected.

• Journal of the Korean Society of Radiology
• /
• v.10 no.6
• /
• pp.469-476
• /
• 2016

In this study, evaluated absorbed dose of moving target using PLD according to prescribed dose and therapeutic technique. First, result of MCNPX when target was deviated from exposure field was reduced dose in proportion to distance. According to prescribed dose, absorbed dose of 3D CRT was better than IMRT in low dose and IMRT was more better in high dose. Absorbed dose of 3D CRT was highest according to therapeutic technique. Therefore, 3D CRT was technique of irradiated highest dose to moving target. But, considered protective effect of normal tissue and patient condition that therapeutic technique was selected to maximized treatment efficiency.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.342-346
• /
• 2004

Recently there has been a great world-wide interest in developing and characterizing new nano-structured materials. These newly developed materials are often prepared in limited quantities and shapes unsuitable for the extensive mechanical testing. The development of depth sensing indentation methods have introduced the advantage of load and depth measurement during the indentation cycle. In the present work, ZnO thin films are prepared on the Glass, GaAs(100), Si(111), and Si(100) substrates at different temperatures by pulsed laser deposition(PLD) method. Because the potential energy in c-axis is law, the films always shaw c-axis orientation at the optimized conditions in spite of the different substrates. Thin films are investigated by X-ray diffractometer and Nano indentation equipment. From these measurements it is possible to get elastic modulus and hardness of ZnO thin films on all substrates.