• Horticultural Science & Technology
• /
• v.33 no.4
• /
• pp.605-617
• /
• 2015

The ultimate goal of this research is to develop a botanical biofiltration system that combines a green interior, biofiltering, and automatic irrigation to purify indoor air pollutants according to indoor space and the size of biofilter. This study was performed to compare the stability of air flow characteristics and removal efficiency (RE) of fine dust within a wall-typed (vertical) botanical biofilter depending on humidifying cycle and to investigate RE of volatile organic compounds (VOCs) by the biofilter. The biofilter used in this experiment was designed as an integral form of water metering pump, water tank, blower, humidifier, and multi-level planting space in order to be suitable for indoor space utilization. As a result, relative humidity, air temperature, and soil moisture content (SMC) within the biofilter showed stable values regardless of three different humidifying cycles operated by the metering pump. In particular, SMCs were consistently maintained in the range of 27.1-29.7% during all humidifying cycles; moreover, a humidifying cycle of operating for 15 min and pausing for 45 min showed the best horizontal linear regression (y = 0.0008x + 29.09) on SMC ($29.0{\pm}0.2%$) during 120 hour. REs for number of fine dust (PM10) and ultra-fine dust (PM2.5) particles passed through the biofilter were in the range of 82.7-89.7% and 65.4-73.0%, respectively. RE for weight of PM10 passed through the biofilter was in the range of 58.1-78.9%, depending on humidifying cycle. REs of xylene, ethyl benzene, total VOCs (TVOCs), and toluene passed through the biofilter were in the range of 71.3-75.5%, while REs of benzene and formaldehyde (HCHO) passed through the biofilter were 39.7% and 44.9%, respectively. Hence, it was confirmed that the wall-typed botanical biofilter suitable for indoor plants was very effective for indoor air purification.

• Journal of Korean Society of Forest Science
• /
• v.96 no.3
• /
• pp.307-316
• /
• 2007

Yellow poplar (Liriodendron tulipifera L.) has low germination rate relatively other species, so the seedling production of Yellow poplar is a hard task. Accordingly this study was conducted to determine the optimal germination conditions for healthy seedling production and to promote survival rate after afforestation. Gemination percentage was examined at different media and seed covering materials using planting flats in the greenhouse. The best germination percentage was observed in sand for media and compound soil for covering materials. But it was time to transplant, seedlings became a poor character (i.e. height, root length, number of root, dry weight) in sand for media. In order to produce healthy seedlings, each different medium was compounded with TKS-2 (this is a gardening bed soil.) in the ratio 1:1 (v/v.), and compared two conditions. Quality of seedling was better than not mixed TKS-2 into each medium. Transplanting seedlings from greenhouse to nursery grew up rapidly 2 months later (early in August~early in October). Growth amount during two months corresponded to 85.6% and 71.3% in total growth amount of height and diameter at root collar, respectively. In the case of the competition-density effect on yellow-poplar seedlings, direct seedling produced the maximum 35 standard seedlings above 8 mm of root collar diameter per $m^2$, while transplanting seedling produced the maximum 64 standard seedlings per $m^2$. And produced seedlings of two way were significantly different rootlet while axial root and lateral root was not significantly different.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.1
• /
• pp.63-69
• /
• 2015

This study was conducted to measure the effect of PE film mulching and irrigation methods on the growth, yield and antioxidant activity of potatoes tubers, in order to examine the possibility of cultivating potatoes in winter season in vinyl greenhouse on the reclaimed tidal land with weak ground inside the sea wall currently completed. The test was conducted on the sandy loam soil (Munpo series), and its salt concentration was 0.42% at the time of planting. The emergence speed per kind of PE film mulching was in the order of black > coloration > transparent > green color, with the black color showing the fastest speed. The temperature change during a day per kind of PE film mulching was in the order of transparent > coloration > green > black color. As for the salt concentration in the soil for each different way of water management, the salt concentration in the treatment of drip irrigation with 1 week interval was lower than that drip irrigation with 2 weeks interval. As for the growth of above-aerial part, plant length was higher, number of tiller and leaves were more and dry weight of above-aerial part was larger in the treatment of drip irrigaton with 1 week interval than drip irrigation with 2 weeks interval. As for the yield of potatoes depending on each way of water management, the yield in the treatment of drip irrigation with 1 week interval was more than drip irrigation with 2 weeks interval. The yield for each different kind of PE film mulching in the weekly drip-irrigation management section was in the order of transparent ${\geq}$ black ${\geq}$ coloration ${\geq}$ green color. In both of total phenol content and DPPH free radical activity experiments, the content and activity were higher with pear color vinyl treatment.

• Korean Journal of Weed Science
• /
• v.31 no.3
• /
• pp.221-228
• /
• 2011

Weed control is of fundamental importance when planting horticultural crops, particularly during the establishment phase. Weeds compete for nutrients, water and light, and can severely threaten the survival and early growth of newly planted crops. Failure to control weeds represents one of the single most important factors leading to crop loss. Knowledge on the existence of the diversity of weed species in greenhouses is of our main concern in this study in order to develop a most efficient and effective weed control strategies. Sixty-two greenhouses were surveyed in 3 cities and counties of Gyeongnam area in March to October 2009 to investigate the feature of weed occurrence in polyvinyl chloride (PVC) after harvesting of the main crops. Forty-one weed species were identified and classified to 18 families which were composed of 14 annual weeds, 18 summer annual weeds and 9 perennial weeds. On the other hand, broadleaf, grasses and sedges recorded with 30, 7 and 4 weed species, respectively. Asteraceae was the most dominant weed species (9 species) noted followed by Poaceae (7 species), Cyperaceae (4 species), Caryophyllaceae and Brassicaceae (3 species respectively) and other families have 1~2 species. The dominant weed species occurred in the greenhouse based on the summed dominance ratio. These weeds were Digitaria sanguinalis, Cyperus iria, Portulaca oleracea, Rorippa islandica, Mazus japonicas, Cardamine flexousa, and Eclipta prostrata and others. Weed occurrence in the greenhouse after horticultural crops consisted of summer annuals (4 species), winter annuals (3 species), and perennial annuals (1 specie). The dominant species occurred in tilled soil based on summed dominance ratio of weeds were Cardamine flexousa (88.1%), Eclipta prostrate (57.4%) and Portulaca oleracea (55.2%). Comparison of weed occurrence was thoroughly surveyed also in which field without PVC, weed species were Portulaca oleracea (55.2), Eclipta prostrata (57.9%) and Trigonotis peduncularis (25.1%) and field with PVC, the identified weeds were Portulaca oleracea (98.75), Trigonotis peduncularis (49.1%), and Eclipta prostrata (36.8%).

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.2
• /
• pp.89-95
• /
• 1979

A field experiment was conducted to investigate the effects of season of application and particle-size distribution of silicate fertilizer on rice yields of Indica type, Milyang 23 and Japonica type Jinheung. The application of silicate fertilizer at the rate of 250kg per 10a increased greatly rice yields. Rice yields were a little higher when silicate fertilizer was applied at transplanting time (Spring application) than applied in Autumn of preceding year (Autumn application) and increased with increasing content of fine particles of silicate fertilizer. However, the difference in effects between the season of application was insignificant and the silicate fertilizer of particles to pass by 100% through a 8 mesh sieve and by 60% through a 25 mesh sieve, 8-25(60%) was as effective as the one to meet silicate fertilizer specifications, 10-28(60%). Silica content of plant samples did not show any significant effects of season of application and particle-size distribution of silicate fertilizer, whereas samples taken at 50 days after tran planting showed significant effects of season of application and particle-size distribution. Silica content of straw of Jinheung was highest when 8-25(60%) was applied. Silica content of soils before the experiment was 36.7 ppm and the content increased to range of 159.5-273.8 ppm and 80.3-134.4 ppm in the plots of Spring application and Autumn application respectively.

• Korean Journal of Environment and Ecology
• /
• v.23 no.1
• /
• pp.90-98
• /
• 2009

Every spring, Korea is always plagued by sandy dust from the western region of China and Mongolia. Yellow sand is causing an environmental problem to Japan and far into the American continent, let alone Korea. At present, the western region of China is going under desertification at a great speed due to climatic change and humans' damaging activities. To cope with this, each country including China is considering ecological restoration of deserts through planting. Accordingly, this research conducted a vegetation survey on Baicheng district which is a representative dry land of western China to obtain a basic data for ecological restoration of a desert. The survey revealed that Setaria viridis which invaded an arid land made a succession into Setaria viridis-Cannabis sativa var. fruderalis community together with Artemisia mongolica-Setaria viridis community due to the increase in salt concentration and alkalization subsequent to dryness. It was also found out that there finally formed Artemisia mongolica community on a flat intense in harsh wind and dryness with the continuous worsening of environmental conditions. There appeared a different type of vegetation on hilly districts where sporadic shade could come into being because the air humidity could be available relatively there. Frequently, typically appearing at the whole survey area, the Tributlus terrestris community was found to make succession into Tribulus terrestris-Cleisrogenes squarrosa community due to the aggravation of soil environment. In addition, with the worsening of the environment at hilly districts, there formed Clesirogenes squarrosa community resistant to dryness, salinity in soil and strong alkalinity. Further, there appeared higher plant life totalling to 62 taxa comprising 58 species and 4 varieties with 27 families and 49 genuses at the whole survey area. Among these, Compositae plants excellent in resistance to environment was surveyed the most, accounting for 27%.

• Journal of Korean Society of Forest Science
• /
• v.95 no.6
• /
• pp.735-742
• /
• 2006

The objective of this study was to elucidate the tolerance of woody plants to simulated acid rain in relation to mycorrhizal inoculation. Germinating seedlings of Robinia pseudoacacia were planted in 1I pots with autoclaved soil mixture of vermiculite, sand and nursery soil at 1:1:1 ratio. Each pot was inoculated with both crushed root nodules from a wild tree of the same species and commercial arbuscular mycorrhizal inoculum of Glomus intraradices at the time of planting the seedlings. Simulated acid rains at pH 2.6, 3.6, 4.6, and 5.6 were made by mixing sulfuric acid and nitric acid at 3: 1 ratio. Each pot received nutrient solution without N and P, and was also supplied with 180 ml of the one pH level of the acid rains once a week for 50 days. The plants were grown in the green house. At the end of experimental period, plants were harvested to determine contents of chlorophyll, mineral nutrients and net photosynthesis in the tissues, dry weight of the plants, and mycorrhizal infection in the roots. Mycorrhizal infection rate was significantly reduced only at pH 2.6, which meant vitality of G intraradices was inhibited at extremely low pH. Height growth, dry weight production, nodule production and chlorophyll content were increased by mycorrhizal infection in all the pH levels except pH 3.6. Particularly, mycorrhizal inoculation increased root nodule production by 85% in pH 5.6 and 45% in 4.6 treatments. But the stimulatory effect of mycorrhizal inoculation on nodule production was reduced at pH 3.6 and 2.6. Net photosynthesis was increased by mycorrhizal infection in all the pH levels. The phosphorus(P) content in the tissues was increased by 43% in average by mycorrhizal inoculation, which was statistically significant except in pH 2.6. It was concluded that mycorrhizal inoculation of Robinia pseudoacacia would enhance growth and resistance of the plants to acid rain by improving the photosynthesis, phosphorus nutrition, and more nodule production.

• Journal of Korean Society of Forest Science
• /
• v.32 no.1
• /
• pp.1-8
• /
• 1976

One of the most common needle leaf species used in planting in Korea is korean pine (Pinus koraiensis S. et Z.), and jack pine (Pinus banksiana Lamb.) is one of the test species for suitability. The relation of nursery bed density of 2-1 korean pine and 1-1 jack pine was studied at the Kwang Nung Nursery, Central Branch Station of Forest Research Institute, and about 40km north of Seoul. Nursery bed density of 2-1 korean pine, which ranged from 36 to 324 trees per square meters and of 1-1 jack pine, which ranged from 25 to 169 trees per square meters, had a marked effect on caliper, height, dry weight and percent and amount of plantable stock. The soil physical and chemical properties is silt plus clay, 50.55 percent; organic matter, 2.09 percent; total nitrogen, 0.13 percent; available phosphorus, 253.25 ppm; exchangeable potash, 0.46 m.e/100g; and pH, 5.58. As the density of the nursery seedling stand of 2-1 korean pine increases, the average tree height increases (Fig. 1A), but in 1-1 jack pine density do not affect to increase or decrease the average tree height. As the density of nursery bed increases, the average stem caliper (at 2cm above ground line) and dry weight decrease (Fig. 1B), but the decreasing rate is more seriously in 1-1 jack pine than 2-1 korean pine (Fig.5). As increasing the density of nursery bed, the T/R ratio of trees of the test species increase. Also the dry weight of leaf, stem and root parts are decreasing in proportion to the increase of stand density, but the drop rate of jack pine is more rapid than korean pine (table. 1) The patent facts of difference of growth characteristics between 2-1 korean pine and 1-1 jack pine were studied. These facts should be used to select the scale of stand density at the nursery bed or the plantable site. Korean pine is demanded high density, on the other hand in jack pine low density are more suitable to manage the stand density. Stands of comparatively low density had the greatest percentage of high-quality stock, and the stands of high density had less than the high quality trees of low density. An important criterion of the best density is percent and number of high-quality trees produced per square meter of bed area. Stem caliper and stem height of seedling is used in most public nurseries to sort seedling into plantable grades. The stock grade standard has set at 4.5mm caliper and 16cm height of 2-1 korean pine as the minimum desired stem caliper and height. By the result studies, the plantable stock grade standards of 2-1 korean pine used at stem height 16cm and stem caliper 4.5mm from public nurseries should be reformed to stem height 18cm and stem caliper 4.0mm by the growth characteristics and the tree distribution of stem height and caliper of relation to density. For the 2-1 korean pine, best density should be about 160 to 200 trees per square meter according to soil fertility. For the 1-1 jack pine, the suitable standard of plantable stock should be at stem height 25cm and caliper 6mm (at 2cm above ground line) and best density was about 100 to 120 trees.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.4
• /
• pp.179-187
• /
• 2016

This study was conducted to determine the impact of elevated temperature and $CO_2$ concentration based on climate change scenario on growth and fruit quality of pepper (Capsicum annuum L. cv. Muhanjilju) with SPAR (Soil Plant Atmosphere Research) chamber. The intraday temperatures of climate normal years fixed by $20.8^{\circ}C$ during the growing season (May 1~October 30) of climatic normal years (1971~2000) in Andong region. There were treated with 4 groups such like a control group (ambient temperature and 400ppm $CO_2$), an elevated $CO_2$ group (ambient temperature and 800ppm $CO_2$), an elevated temperature group (ambient temperature+$6^{\circ}C$ and 400ppm $CO_2$) and an elevated temperature/$CO_2$ group (ambient temperature+$6^{\circ}C$ and 800ppm $CO_2$). Compared with the control, plant height, branch number and leaf number increased under the elevated temperature and elevated temperature/$CO_2$ group. However, leaf area and chlorophyll content showed a tendency of decreasing in the elevated temperature group and elevated temperature/$CO_2$ group. The number of flower and bud were decreased in the elevated temperature and elevated temperature/$CO_2$ group (mean temperature at $26.8^{\circ}C$) during the growth period. The total number and the weight of fruits were decreased in the elevated temperature group and elevated temperature/$CO_2$ group more than the control group. While the weight, length and diameter of fruit decreased more than those of control as the temperature and $CO_2$ concentration increased gradually. This result suggests that the fruit yield could be decreased under the elevated temperature/$CO_2$ ($6^{\circ}C$ higher than atmospheric temperature/2-fold higher than atmospheric $CO_2$ concentration), whereas the percentage of ripen fruits after 100 days of planting was increased, and showed earlier harvest time than the control.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.1
• /
• pp.54-63
• /
• 1994

Runner-derived(Expt.1) and tissue culture-derived strawbeery plantlets(Expt. 2) were grown in pots under greenhouse condition and inoculated with inocula of the vesicular-arbuscular mycorrhizal(VAM) fungi isolated from a field strawberry plants. Total biomass of mycorrhizal strawberry plants was significantly increased. There was a similar tendency in the number of cluster and flower at 20 weeks after inoculation, and VAM fungi inoculation positively influenced the leaf number, leaf length, leaf width and petiole length of strawberry plants in all investigated times. However, no difference was in the flowering time of strawberry plants. Leaf margin of non-inoculated strawberry plantlets turned into raddish brown(7.5R 4/8) from around 4 weeks after habituation. Inoculation of VAM fungi at the time of habituation was much more effective in stimulating plant growth. VA mycorrhizal dependency were 162.7 % in the runner-derived strawberry plants, Dependency with pre-and post-habituated incoulation in tissue culture-derived plants was respective 116.4% and 106.0%. The levels of mycorrhizal colonization were increased with plant growth and infection rates by endophytes at harvest time were 47.5% in Expt. 1, 56.4% in Expt. 2, respectively. Contents of phosphorus, potassium and calcium in mycorrhizal strawberry plants at harvest time were higher than non-mycorrhizal ones however, magnesium concentration was decreased. These experiments demonstrated that VAM fungi could be introduced into nursery stages of strawberry plantlets including the temporary planting period to improve growth and plant nutrients uptake by mycorrhizal plants.