• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.238-239
• /
• 2012

ZnO disk는 Ar 가스의 ON/OFF 사이클을 사용한 기상 이동법으로 성장하였다. 온도 의존성 photoluminescence (PL)은 PL 스펙트럼의 quenching 동작을 관장하는 메커니즘을 연구하기 위해 조사하였다. ZnO disk의 12 K PL 스펙트럼에서 3.364, 3.315, 3.244, 3.212, 3.170, 3.139, 3.100 eV의 피크를 관측되었고, 그것은 각각 excitons bound to neutral donors ($D^{\circ}X$), A-line, first-order longitudinal optical (1LO) phonon replica of A-line (A-1LO), donor-to acceptor pair (DAP), A-2LO, DAP-1LO, A-3LO 이다. $D^{\circ}X$와 A-line 피크는 Varshni 공식에 의해서 피팅을 하였고, 도너 이온화 에너지는 40 meV 이었다. Free excitons, $D^{\circ}X$, A-line의 lifetime은 이론적으로 계산하였고, 온도가 증가함에 따라 lifetime이 증가하였다.

• 공업화학
• /
• 제26권3호
• /
• pp.362-365
• /
• 2015

본 연구에서는 polyoxyethylenenonylphenylether (NP5) 계면활성제와 sodium bis(2-ethylhexyl) sulfosuccinate (AOT) 계면활성제가 형성하는 두 종류의 W/O 마이크로에멀젼을 이용해서 실리카에 담지된 ZnSe 양자점을 제조하였다. 본 방법으로 3 nm 크기의 cubic zinc blende 결정 구조를 갖는 ZnSe 입자를 합성하였으며 약 20 nm 크기의 실리카 입자에 효과적으로 담지 시킬 수 있었다. 합성된 입자의 photoluminescence (PL) 주변 온도 의존성을 $30^{\circ}C$에서 $60^{\circ}C$ 범위에서 확인한 결과, 온도가 증가함에 따라 PL intensity가 감소하였으며 PL intensity와 온도와는 높은 상관관계를 나타내었다. 아울러 PL intensity와 온도의 상관관계는 온도를 낮은 곳에서 올려가며 측정한 경우와 반대로 낮추며 측정한 경우 같은 상관도를 나타내어 온도 의존성이 가역적임을 알 수 있었다. 그 결과 실리카에 담지된 ZnSe 양자점이 온도 센서로 사용될 수 있는 잠재적인 매체임을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제26권11호
• /
• pp.1776-1782
• /
• 2005

ZnSe/ZnS, UV-blue luminescent core shell quantum dots, were synthesized via a thermal decomposition reaction of organometallic zinc and solvent coordinated Selenium (TOPSe) in a hot solvent mixture. The synthetic conditions of the core (ZnSe) and the shell (ZnS) were independently studied at various reaction temperature conditions. The obtained colloidal nanocrystals at corresponding temperatures were characterized for their optical properties by UV-vis, room temperature solution photoluminescence (PL) spectroscopy, and further obtained powders were characterized by XRD, TEM, and EDXS analyses. The synthetic temperature condition to obtain the best PL emission intensity for the ZnSe core was 300 ${^{\circ}C}$, and for the optimum shell capping, the temperature was 135 ${^{\circ}C}$. At this temperature, solution PL spectrum showed a narrow emission peak at 427 nm with a PL efficiency of 15%. In addition, the measured particle sizes for the ZnSe/ZnS nanocomposite via TEM were in the range of 5 to 12 nm. Furthermore, we have synthesized water-soluble ZnSe/ZnS nanoparticles by capping the ZnSe/ZnS hydrophobic surface with mercaptoacetate (MAA) molecules. For the obtained aqueous colloidal solution, the UV-vis spectrum showed an absorption peak at 250 nm, and the solution PL emission spectrum showed a peak at 425 nm, which is similar to that for hydrophobic quantum dot ZnSe/ZnS. However, the calculated PL efficiency was relatively low (0.1%) due to the luminescence quenching by water and MAA molecules. The capping ligand was also characterized by FT-IR spectroscopy, with the carbonyl stretching peak in the mercaptoacetate molecule appearing at 1575 $cm ^{-1}$. Finally, the particle sizes of the MAA capped ZnSe/ZnS were measured by TEM, showing a range of 12 to 17 nm.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.166-166
• /
• 2006

The photoluminescence (PL) efficiency of $Ir(ppy)_{3}$:PVK is lower than $Ir(ppy)_{3}$:CBP for the whole range of doping concentration and this low PL efficiency can be a reason of the lower efficiency of PhPLED than PhOLED. The lower efficiency is originated from the large bi-excitonic quenching such as the triplet-triplet annihilation. The PhPLEDs showed very short lifetime. The short lifetime was found to be originated from the instability of the doubly reduced $Ir(ppy)_{3^{-2}}$. The double reduction takes place because of the low electron mobility of PVK and large energy difference of LUMO level between PVK and $Ir(ppy)_{3}$.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.248-248
• /
• 2011

ZnO was grown on a Au-catalyzed Si(100) substrate by using a simple vapor phase transport (VPT) with a mixture of zinc oxide and graphite powders. The ZnO grown at 800$^{\circ}C$ had a soccer ball structure with diameters of <500 nm. The ZnO soccer ball structure was, for the first time, observed in this work. The optical properties of the ZnO soccer balls were investigated by photoluminescence (PL). In the room-temperature (RT) PL of the ZnO soccer balls, a strong near-band-edge emission (NBE) and a weak deep-level emission were observed at 3.25 and 2.47 eV (green emission), respectively. The weak deep-level emission (DLE) at around 2.47 eV (green emission) is caused by impurities and structural defects. The FWHM of the NBE peak from the ZnO soccer balls was 110 meV. In addition, the PL intensity ratio of the NBE to DLE was about 4. The temperature-dependent PL was also carried out to investigate the mechanism governing the quenching behavior of the PL spectra.

• 한국전기전자재료학회논문지
• /
• 제37권1호
• /
• pp.68-73
• /
• 2024

In this study, the praseodymium-doped yttrium phosphate (YPO₄:Pr³⁺) powder, which is well known for its high luminescent efficiency, and long life in the UV range, was synthesized with various content ratios of Pr₆O₁₁ and calcination temperature. Crystal structure and luminescent properties of various phosphor powders based on different concentrations and calcination conditions were characterized by XRD (X-Ray Diffraction) and PL (photoluminescence) spectrometers. From the XRD analysis, the structure of YPO₄:Pr³⁺ which is calcinated at 1,200℃ was stable tetragonal phase and crystal size was calculated about 25 nm by Scherrer equation. PL emission of YPO₄:Pr³⁺ with a different content ratio of Pr₆O₁₁ by excitation λ_exc=250 nm shows that 0.75 mol% phosphor powder has maximum PL intensity and PL decreases with the increase of the ratio of Pr₆O₁₁ up to 1.25 mol% which is caused by changes of crystallinity of phosphor powders. With increasing dopant ratio, photo-luminescence Emission decreases due to Concentration quenching, which is commonly observed in phosphors. Currently, 0.75 mol% is considered the optimal doping concentration. A hybrid ultraviolet-emitting device incorporating YPO₄:Pr³⁺ fluorescent material with plasma discharge was fabricated to enhance UV germicidal effects while minimizing ozone generation. UV emission from the plasma discharge device was shown at about 200 nm and 350 nm which caused additional emission of the regions of 250 nm, 315 nm, and 370 nm from the YPO₄:Pr³⁺ phosphor.

• 한국세라믹학회지
• /
• 제48권2호
• /
• pp.183-188
• /
• 2011

In this article, the effect of the crystal structural environment of $Pr^{3+}$ ions on the photoluminescence (PL) characteristics of double tungstates, such as $A(M_{1-X}Pr_X)W_2O_8$ (A=Li, Cs, M = In, Y, Sc, La; $0.007{\leq}x{\leq}0.1$) and $La_{1.96}Pr_{0.04}W_3O_{12}$ are characterized. By varying the ion radius in A and M sites, the structural environment of $Pr^{3+}$ ions were modified. The structural criteria, that is, the point charge electrostatic potentials V around the $Pr^{3+}$ activator, were calculated using the crystal structural parameters. The point charge potential V can be a valid criterion for $^3P_o$ quenching in various double tungstates. When the calculated V values are large (> 6.0), the luminescence from the $^3P_0$ level becomes dominant. When the calculated V values are about 3.8, the $^1D_2$ line appears weakly but $^3P_0$-level luminescence is absent. When the calculated V values are small (< 2.0), the luminescence from the $^1D_2$ level becomes dominant and $^3P_0$-level luminescence is absent. At 2.0$^3P_o$ quenching to $^1D_2$ level occurs substantially in accordance with the structural criterion of the point charge potential model.

• 한국재료학회지
• /
• 제21권12호
• /
• pp.644-649
• /
• 2011

[ $A_{3-2x/3}Al_{1-z}In_{z}O_4F:Eu_x^{3+}$ ](A = Ca, Sr, Ba, x = -0.15, z = 0, 0.1) oxyfluoride phosphors were simply prepared by the solid-state method at $1050^{\circ}C$ in air. The phosphors had the bright red photoluminescence (PL) spectra of an $A_{3-2x/3}Al_{1-z}In_{z}O_4F$ for $Eu^{3+}$ activator. X-ray diffraction (XRD) patterns of the obtained red phosphors were exhibited for indexing peak positions and calculating unit-cell parameters. Dynamic excitation and emission spectra of $Eu^{3+}$ activated red oxyfluoride phosphors were clearly monitored. Red and blue shifts gradually occurred in the emission spectra of $Eu^{3+}$ activated $A_3AlO_4F$ oxyfluoride phosphors when $Sr^{2+}$ by $Ca^{2+}$ and $Ba^{2+}$ ions were substituted, respectively. The concentration quenching as a function of $Eu^{3+}$ contents in $A_{3-2x/3}AlO_4F:Eu^{3+}$ (A = Ca, Sr, Ba) was measured. The interesting behaviors of defect-induced $A_{3-2x/3}Al_{1-z}In_{z}O_{4-{\alpha}}F_{1-{\delta}}$ phosphors with $Eu^{3+}$ activator are discussed based on PL spectra and CIE coordinates. Substituting $In^{3+}$ into the $Al^{3+}$ position in the $A_{3-2x/3}AlO_4F:Eu^{3+}$ oxyfluorides resulted in the relative intensity of the red emitted phosphors noticeably increasing by seven times.

• 한국결정성장학회지
• /
• 제9권2호
• /
• pp.141-148
• /
• 1999

Ir 도가니에서 PbO와 $WO_{3}$를 50 %~50 % 혼합한 시료로 부터 쵸코랄스키 성장방법에 의해 고품질의 순수한 $PbWO_{4}$와 Nb 도핑한 $PbWO_{4}$를 성장 시켰다. 결정은 성분의 선택적 결손에 부합하는 화학양론적 변화는 $PbWO_{4}$의 노란색 형성에 원인이 되었다. X선 회절 실험을 통해서 각 $PbWO_{4}$ 결정의 격자상수 변화를 조사하였으며 광발광, 광흡수 및 라만 스펙트럼에 대한 특성들에 대해 조사를 하였다. 광발광은 10 K~300 K 온도 영역에서 측정 되었으며 낮은 온도 영역에서는 미흡한 온도의존성을 보였으며 200 K 온도 이상에서는 열적소광에 의한 광발광 강도의 감소를 보였다. PL 강도와 반치폭의 온도 의존성으로 부터 각 PWO 시료에 대한 활성화 에너지, Huang-Rhys 결합상수, 비균질선폭계수를 구하였다.

• 한국진공학회지
• /
• 제12권2호
• /
• pp.123-129
• /
• 2003

다공질 실리콘(PS)기판 위에 rf-스퍼터링법으로 10~40 nm의 두께의 반 투과성 구리박막을 증착하였다. PS는 p형 (100) 실리콘 웨이퍼를 기판으로 50㎃/$\textrm{cm}^2$의 전류밀도를 사용하여 전해 에칭법으로 양극 산화하여 제작하였다. PS층과 Cu박막의 미세구조를 분석하기 위하여 SEM, AFM 그리고 XRD 분석을 시행하였다. AFM 분석결과 Cu 박막의 RMS roughness 값은 약 1.47nm로 Volmer-Weber 유형의 결정립 성장을 보였으며, 결정립의 성장은 (111) 배향성을 나타냈다. PS층의 PL 스펙트럼은 blue green 영역에서 관찰되었고, Cu 박막 증착 후 0.05eV의 blue shift가 나타났으며, 약간의 강도저하를 보였다. PS/Cu접합구조의 FTIR스펙트럼은 주 피크변화는 없으나 전반적인 강도의 감소를 보였다. I-V 특성곡선으로 본 PS/Cu 접합구조는 ideality factor가 2.77이고 barrier의 높이가 0.678eV인 Schottky 유형의 다이오드 특성을 보였다. PS/Cu 접합구조로 만든 다이오드 제조로 EL특성을 관찰할 수 있었다.