• 한국신뢰성학회지:신뢰성응용연구
• /
• 제14권2호
• /
• pp.103-107
• /
• 2014

An algorithm to get network reliability, where each link has probability of fuzzy number, is proposed. Decomposition method and fuzzy numbers arithmetic are applied to the algorithm. Pivot link is chosen one by one from start node recursively at time of decomposition, and arithmetic of fuzzy complementary numbers is included at the same time. No criteria of pivot link selection and the recursive calculation make the algorithm simple.

• Steel and Composite Structures
• /
• 제8권6호
• /
• pp.441-455
• /
• 2008

This paper presents an effective hysteretic model for the prediction and evaluation of steel reinforced concrete member seismic performance. This model adopts the load-deformation relationship acquired from monotonic load tests and incorporates the double-pivot behavior of composite members subjected to cyclic loads. Deterioration in member stiffness was accounted in the analytical model. The composite member performance assessment control parameters were calibrated from the test results. Comparisons between the cyclic load test results and analytical model validated the proposed method's effectiveness.

• Tribology and Lubricants
• /
• 제15권1호
• /
• pp.24-28
• /
• 1999

This paper describes a new pivoting technique to improve bearing performance in pivoted pad thrust bearings. This new technique adjusts the pivot line in a line pivoted pad thrust bearing to be parallel to the trailing edge of a sector shaped pad. Bearing performance factors such as load carrying capacity, frictional torque and flow rate are numerically investigated for conventional point-pivoted and line-pivoted pads and for the new parallel-line pivoting technique. It is shown that the load carving capacity can be maximized with the new technique.

• 대한한의학원전학회지
• /
• 제29권4호
• /
• pp.95-103
• /
• 2016

Objectives : This paper aims to study how 'All articulations are controlled by the gallbladder' as urged by Heoim in Chimgugyeongheombang was reflected in the clinical field, and look into the reason for his assertion. Methods : The paper looked into Chimgugyeongheombang and 1) found examples of how acupoints related to gallbladder were used to treat articulation-related diseases, and 2) investigated the relation between gallbladder and articulations through analyzing the acupoints used for treating articulation-related diseases. These are then compared with Zhenjiuzishengjing to see if the assertions made in 'All articulations are controlled by the gallbladder' were actually applied in clinical fields. Results & Conclusions : Heoim dealt with 20 points out of the 44 acupoints for gallbladder, and used 14 of them for treatments of articulation-related diseases. Gallbladder acupoints were used for ten illnesses, and four of them were related to articulation. Chimgujasaenggyeong showed a difference in that it did not utilize gallbladder acupoints to treat these illnesses. Out of 33 articulation-related illnesses, gallbladder meridians and acupoints were suggested as a means to treat them in 15 cases, and this is an increase in the usage of these points compared to Chimgugyeongheombang. In other words, Heoim actively utilized gallbladder meridian points in treating articulation-related illnesses. The reason Heoim drew a line between gallbladder and articulations is because gallbladder is categorized as a lesser yang pivot and articulations itself functions as a pivot by acting as a pivot for human body movement.

• 한국인터넷방송통신학회논문지
• /
• 제14권6호
• /
• pp.295-301
• /
• 2014

데이터를 정렬하는 방법들 중 O(n log n)보다 빠른 방법은 알려져 있지 않고 있으며, 가장 빠른 방법으로 퀵정렬이 있다. n개의 데이터에 대해 퀵정렬은 최적의 경우 O(n log n), 최악의 경우 $O(n^2)$ 수행 복잡도를 갖고 있다. 본 논문에서는 퀵정렬보다 빠르게 정렬하는 방법으로, 분할된 리스트의 첫 번째 L=a[s], 마지막 H=a[e]과 중간 $M=[{\lfloor}(s+e)/2{\rfloor}]$에 대해 P=(L+M+H)/3의 3-점 평균을 피벗값으로 결정하는 방법을 제안하였다. 실험 결과 제안된 3-점 평균 피벗 퀵정렬은 최적, 평균, 최악 모두 수행 복잡도가 O(n log n)으로 퀵정렬의 $O(n^2)$ 정렬 시간을 단축시킬 수 있었다.

• 한국소음진동공학회논문집
• /
• 제21권8호
• /
• pp.752-760
• /
• 2011

In tilting pad bearing design process, the selection of the proper configuration type of either a load-between-pad(LBP) or load-on-pad(LOP) as well as preload and pivot offset conditions is to be carefully considered. Also the bearing needs to be designed in order to be suited for the rotor-bearing system and operating condition. In this paper, it is observed that the dynamic characteristics in a five pad tilting pad bearing for the LBP and the LOP configurations are influenced by the variation of preload and pivot offset. In this context, rotor dynamic analysis of the 5 MW industrial gas turbine supported by the tilting pad bearing at the front and roller bearing at the rear is carried out based on the dynamic coefficients of the tilting pad bearing investigated. The result shows that two rigid body critical modes experience various changes according to the influence of the tilting pad bearing uniquely applied to one side of this machine. Mainly, the second critical speed, the rigid body mode of conical shape with high whirling in the tilting pad bearing, is significantly changed by preload and pivot offset regardless of the LBP and LOP configurations. And, the first critical mode, the rigid body mode of conical shape with high whirling in the roller bearing, is sensitively affected by preload applied to the LOP configuration and by its asymmetric dynamic properties.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.425-432
• /
• 2011

In tilting pad bearing design process, the selection of the proper configuration type of either a Load-Between-Pad (LBP) or Load-On-Pad (LOP) as well as preload and pivot offset conditions is to be carefully considered. Also the bearing needs to be designed in order to be suited for the rotor-bearing system and operating condition. In this paper, it is observed that the dynamic characteristics in a 5 pad tilting pad bearing for the LBP and the LOP configurations are influenced by the variation of preload and pivot offset. In this context, rotor dynamic analysis of the 5MW industrial gas turbine supported by the tilting pad bearing at the front and roller bearing at the rear is carried out based on the dynamic coefficients of the tilting pad bearing investigated. The result shows that two rigid body critical modes experience various changes according to the influence of the tilting pad bearing uniquely applied to one side of this machine. Mainly, the second critical speed, the rigid body mode of conical shape with high whirling in the tilting pad bearing, is significantly changed by preload and pivot offset regardless of the LBP and LOP configurations. And, the first critical mode, the rigid body mode of conical shape with high whirling in the roller bearing, is sensitively affected by preload applied to the LOP configuration and by the its asymmetric dynamic properties.

• Journal of Biosystems Engineering
• /
• 제43권4호
• /
• pp.273-284
• /
• 2018

Purpose: Conventional headland turning typically requires repeated forward and backward movements to move the farming equipment to the next row. This research focuses on developing an upland agricultural robot with an optimized headland turning mechanism that enables a $180^{\circ}$ turning positioning to the next row in one steering motion designed for a two-wheel steering, four-wheel drive agricultural robot named the HADA-bot. The proposed steering mechanism allows for faster turnings at each headland compared to those of the conventional steering system. Methods: The HADA-bot was designed with 1.7-m wide wheel tracks to travel along the furrows of a garlic bed, and a look-ahead path following algorithm was applied using a real-time kinematic global positioning system signal. Pivot turning tests focused primarily on accuracy regarding the turning radius for the next path matching, saving headland turning time, area, and effort. Results: Several test cases were performed by evaluating right and left turns on two different surfaces: concrete and soil, at three speeds: 1, 2, and 3 km/h. From the left and right side pivot turning results, the percentage of lateral deviation is within the acceptable range of 10% even on the soil surface. This U-turn scheme reduces 67% and 54% of the headland turning time, and 36% and 32% of the required headland area compared to a 50 hp tractor (ISEKI, TA5240, Ehime, Japan) and a riding-type cultivator (CFM-1200, Asia Technology, Deagu, Rep. Korea), respectively. Conclusion: The pivot turning trajectory on both soil and concrete surfaces achieved similar results within the typical operating speed range. Overall, these results prove that the pivot turning mechanism is suitable for improving conventional headland turning by reducing both turning radius and turning time.

• 경영과학
• /
• 제15권1호
• /
• pp.1-12
• /
• 1998

This paper discusses a new algorithm, the PAPANET (Pivot And Probe Algorithm for NETwork optimization), for solving linear, capacitated linear network flow problem (NPs), PAPANET is a variation and specialization of the Pivot And Probe Algorithm (PAPA) developed by Sethi and Thompson, published in 1983-1984. PAPANET first solves an initial relaxed NP (RNP) with all the nodes from the original problem and a limited set of arcs (possibly all the artificial and slack arcs). From the arcs not considered in the current relaxation, we PROBE to identify candidate arcs that violate the current solution's dual constraints maximally. Candidate arcs are added to the RNP, and this new RNP is solved to optimality. This candidate pricing procedure and pivoting continue until all the candidate arcs price unfavorably and all of the dual constraints corresponding to the other, so-called noncandidate arcs, are satisfied. The implementation of PAPANET requires significantly fewer arcs and less solution CPU time than is required by the standard network simplex method implementation upon which it is based. Computational tests on randomly generated NPs indicate that our PAPANET implementation requires up to 40-50% fewer pivots and 30-40% less solution CPU time than is required by the comparable standard network simplex implementation from which it is derived.

• EDISON SW 활용 경진대회 논문집
• /
• 제6회(2017년)
• /
• pp.194-203
• /
• 2017

The center of percussion(COP) is the point of an extended massive object attached to a pivot where a perpendicular impact will produce no reactive shock at the pivot. COP is an important concept in the field of vibration and dynamics. In vibration, COP causes reduction of vibration and in dynamics, it brings about maximum speed of an object. Many studies about COP are still in progress. However most of the researches have typically focused on the method of mathematical and numerical anlalysis. In this paper, impact analysis was proved by the mechanical energy method using EDISON co-rotational plane beam transient analysis program. The result expressed in acceleration was the relative magnitude of the impulse, which was the indicator of COP. Then, these results were compared with the reference thesis results for exact consequences. Additionally, parametric study of COP was conducted.