• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1010-1012
• /
• 2004

AC loss is an important factor in the development of superconducting tapes and superconducting power applications. In this paper we measured and compared characteristics of BSCCO tape and YBCO Coated Conductor(YBCO CC). BSCCO tape was fabricated by PIT method. We measured critical current density and transport current loss of it. Also, YBCO CC tape consist of substrate. buffer, YBCO and metal layers. We measured critical current density on variations of external magnetic field and transport current loss of these cases. The results of measurement show that normalized critical current of YBCO CC is smaller then that of BSCCO tape in the external magnet field. According to the results. measured loss and calculated of the YBCO CC show the same tendency.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.592-596
• /
• 2001

Near field technology makes it possible to overcome the diffraction limit of laser beam and create the small spot. Because of the small spot size, the pit size and track pitch can be decreased. So the high performance actuator is needed for near field recording system. And the light mass and the small form factor are also important properties of the NFR actuator in order to be used for hand held device. The purpose of this paper is the optimal design of the NFR coarse actuator to maximize actuating force. The structure of NFR coarse actuator is the same as HDD VCM actuator. The permeance method is used for modeling of the coarse actuator. The optimal result and the FEM simulation result are presented.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.27 no.1
• /
• pp.7-8
• /
• 2023

A 50-year-old female patient referred by the department of breast and thyroid surgery was recommended for orthopedic surgery because lesion like herniation pit was found in the left proximal femur in bone mineral densitometry (BMD). She was later diagnosed with bone metastasis on biopsy in orthopedic surgery. Pelvic X-ray and Lt thigh MRI were performed . Intra-medually nail was operated later. The BMD is a diagnostic method that determines the results by numerical values, so it is inevitable to neglect to observe the bone shape, but as shown in the above case, the examiner's observation of changes in bone shape can return to beneficial treatment for patients.

• Convergence Security Journal
• /
• v.14 no.7
• /
• pp.17-22
• /
• 2014

Wireless Ad hoc Network is threatened from many types of attacks because of its open structure, dynamic topology and the absence of infrastructure. Attacks by malicious nodes inside the network destroy communication path and discard packet. The damage is quite large and detecting attacks are difficult. In this paper, we proposed attack detection technique using secure authentication infrastructure for efficient detection and prevention of internal attack nodes. Cluster structure is used in the proposed method so that each nodes act as a certificate authority and the public key is issued in cluster head through trust evaluation of nodes. Symmetric Key is shared for integrity of data between the nodes and the structure which adds authentication message to the RREQ packet is used. ns-2 simulator is used to evaluate performance of proposed method and excellent performance can be performed through the experiment.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.32-37
• /
• 2005

We developed a numerical simulator in order to study the Super-RENS/ROM (Super REsolution Near-Field Structure, Read Only Memory) using 3-dimensional FDTD (finite difference time domain) method. The simulation can be performed by three steps. In the first step, we utilized the vector-diffraction theory to calculate the characteristics of incident laser beam from the object-lens to the surface of the disk. At the second step, we fed the calculated result as an input for the main FDTD simulations on the optical layers in the disk structure. After performed the FDTD simulations, we took near-to-far field transformation for the reflected signal, from the surface of the disk to the detector. Finally, we can get reflected signal at the photo-diode. Using this developed simulator, we were able to study about the reading signal from various disk structures as a function of a laser beam position. We calculated reading signals for various pit sizes for Super-ROM structure, and it is found that the simple optical diffraction theory can not explain the reading mechanism of Super-ROM, and more complicated temperature dependent physics must be involved.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.6
• /
• pp.394-399
• /
• 2000

Langasite (LGS) is a material hoped to meet needs required of new base materials for future communication devices (e.g.SAW filters). In this study, synthesis of new materials was pursued by developing new compounds with the host structure of Langasite in hopes to obtain materials with improved characteristics; compounds including $La_3$$Ta_{0.5}$$Ga_{5.5}$$O_{14}$(LTG)and $La_3$$Nb_{0.25}$$Ta_{0.25}$$Ga_{5.5}$$O_{14}$(LNTG) were synthesized by solid state reactions. Characteristics of the compound synthesized in question were determined. The single crystals of Langasite-type were grown using the Czochralski method. The growth conditions for LTG and LNTG were studied and were found to be similar to those of LGS. The growth characteristics of LNTG were observed by studying etch pit formation density along the crystal length.

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.2
• /
• pp.138-143
• /
• 2006

We developed a numerical simulator in order to study the Super-RENS/ROM (Super REsolution Near-Field Structure, Read Only Memory) using 3-dimensional FDTD (finite difference time domain) method. The simulation can be performed by three steps. In the first step, we utilized the vector-diffraction theory to calculate the characteristics of incident laser beam from the object-lens to the surface of the disk. At the second step, we fed the calculated result as an input for the main FDTD simulations on the optical layers in the disk structure. After performed the FDTD simulations, we took near-to-far field transformation for the reflected signal, from the surface of the disk to the detector. Finally, we can get reflected signal at the photo-diode. Using this developed simulator, we were able to study about the reading signal from various disk structures as a function of a laser beam position. We calculated reading signals for various pit sizes for Super-ROM structure, and it is found that the simple optical diffraction theory can not explain the reading mechanism of Super-ROM, and more complicated temperature dependent physics must be involved.

• Journal of Biosystems Engineering
• /
• v.39 no.2
• /
• pp.76-86
• /
• 2014

Purpose: The objective of this study was to measure emissions of gases (ammonia ($NH_3$), hydrogen sulfide ($H_2S$) and carbon dioxide ($CO_2$)), volatile organic compounds (VOC) and odor from two shallow pit pig nursery rooms. Gas and odor reduction practices for swine operations based on the literature were also discussed. Methods: This study was conducted for 60 days at a commercial swine nursery facility which consisted of four identical rooms with mechanical ventilations. Two rooms (room 1 (R1) and room 2 (R2)) with different pig numbers and ventilation rates were used in this study. The pig manure from both the R1 and R2 were characterized. Indoor/outdoor temperatures, ventilation rates/duration, $NH_3$, $H_2S$, $CO_2$, and VOC concentrations of the ventilation air were measured periodically (3-5 times/week). Odor concentrations of the ventilations were measured two times on two days. Three different types of gas and odor reduction practices (diet control, chemical method, and biological method) were discussed in this study. Results: The volatile solids to total solids ratio (VS/TS) and crude protein (CP) value of pig manure indicated the pig manure had high potential for gas and odor emissions. The $NH_3$, $H_2S$, $CO_2$ and VOC concentrations were measured in the ranges of 1.0-13.3, 0.1-5.7, 1600-3000 and 0.0-1.83 ppm, respectively. The $NH_3$ concentrations were found significantly higher than $H_2S$ concentrations for both rooms. The odor concentrations were measured in the range of $2853-4432OU_E/m^3$. There was significant difference in odor concentrations between the two rooms which was due to difference in pig numbers and ventilation duration. The literature studies showed that simultaneous use of dietary control and biofiltration practices will be more effective and environmentally friendly for gas and odor reductions from pig barns. Conclusions: The gas and odor concentrations measured in the ventilation air from the pig rooms indicate an acute need for using gas and odor mitigation technologies. Adopting diet control and biofiltration practices simultaneously could be the best option for mitigating gas and odor emissions from pig barns.

• Journal of Korean society of Dental Hygiene
• /
• v.4 no.1
• /
• pp.65-79
• /
• 2004

There are two purposes in this study. The first one is to collect some oral health information through the investigations upon the oral health care of Korean adults. Referring to the result of the investigation. I wanted to furnish fundamental data with oral health education for each age and with a publicity booklet editing. That is the second purpose of this research. Among the people who visited Seo-gu Public Health Center in Kwang-ju, 207 people answered the questionnaires. There were 86 men and 121 women from the 20-aged to the 59- aged. The questionnaires covers knowledge aquisition path for dental caries prevention, the cognition degrees for the causes of dental caries and its prevention, the cognition degrees for the causes of periodontal disease and its prevention, the degrees for oral health methods, and the importance of oral health. The conclusions are as follows; 1. The cognition degree for dental caries prevention: The cognition for pit and fissure sealant was appeared most highly in thirties by 85.3%. but 62.1 % in fifties was answered, "Never heard". The cognition degree for fluoride application was appeared most highly in thirties by 73.5%. and the cognition degree for water fluoridation was most highly in forties by 54.2%. 2. The knowledge for pit and fissure sealant was acquired mostly through dental hospital in every age by 54.2%. 3. The knowledge for fluoride application was learned mostly through dental hospitals in twenties and thirties by 32.7%. and mostly through TV or radio health programs in forties and fiftieseach by 35.7% and 50.0%. 4. The knowledge for water fluoridation was acquired through TV or radio programs in all ages such as twenties. thirties. forties and fifties. Its rate was 57.8%. 5. The cognition degree of the cause of dental caries: 53.1 % of all ages think that dental caries can most frequently be caused by being lack of toothbrushing. 6. The cognition degree of the cause of periodontal disease: 58.5% people of all ages think that both dental plaque and calculus might be the main cause of periodontal disease. 7. The cognition degree of dental caries prevention: 72.8% people think that dental caries can be prevented by right tooth brushing method. and 8.7% people think that they can be prevented by scaling. However, 10.7% people of them were not interested in dental caries prevention. 8. The importance of oral health: 35.3% people think that teeth health is the most important, and 63.8% people think oral health is one of the most important health problems. Forties answered that tooth health was the most important thing, and fifties. thirties and twenties followed in the order. 9. The cognition for oral health maintenance: all ages(twenties. thirties. forties. and fifties) answered that right toothbrushing method was the best way to keep oral health by 69.1%.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.4
• /
• pp.419-425
• /
• 2009

Recently, the number of shallow tunnel construction increases to improve the structural safety and environment-friendliness. In Semi-Cut and Cover Method, ground is excavated to the crown arch level and braced rib arch is set to backfill before the excavation of lower face. Semi-Cut and Cover Method is proposed to solve the problems occurred by the conventional Cut and Cover Method, such as unstability, high-cost and the large cutting slope to be reinforced. In this paper, the behaviors of Braced Rib Arch in shallow tunnel excavated by semi-cut and cover method was studied. Model tests in 1:10 Scale were performed in real construction sequences. The distance between supports of rib arch was 1.8 m and the length of spacer was 1.0 m. the size of test pit was 4.0 m (width)$\times$3.3 m (length) 4.0 m (height) in dimension. Tests results show that backfill load acting on arch was smaller than that in the conventional Open-Cut Method.