• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.451-459
• /
• 2018

This work presents an approach for modeling of electric vehicle considering the vehicle dynamics, drive train, rotational wheel and load dynamics. The system is composed of IPMSM (Interior Permanent Magnet Synchronous Motor) coupled with the wheels through a drive train. Generally, IPMSM is controlled by ordinary PID controllers. Performance of the ordinary PID controller is not satisfactory owing to the difficulties of optimal gain selections. To overcome this problem, a new type of fuzzy logic gain tuner for PID controllers of IPMSM is required. Therefore, in this paper fuzzy logic based gain tuning method for PID controller is proposed and compared with some previous control techniques for the better performance of electric vehicle with an optimal balance of acceleration, speed, travelling range, improved controller quality and response. The model was developed in MATLAB/Simulink, simulations were carried out and results were observed. The simulation results have proved that the proposed control system works well to remove the transient oscillations and assure better system response in all conditions.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.133.2-133
• /
• 2001

This paper focuses on the feasibility of fuzzy logic control for networked control systems. In order to evaluate its feasibility, a networked control system for motor speed control is implemented on a Profibus-DP network. The NCS consists of several independent, but interacting processes running on two separate stations. By using this NCS, the network delay is analyzed to find the cause of the delay. Furthermore, in order to prove the feasibility, the fuzzy logic controllers performance is compared with those of conventional PID controllers. Based on the experimental results, the fuzzy logic controller can be a viable choice for NCS due to its robustness against parameter uncertainty.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권4호
• /
• pp.415-424
• /
• 2002

In this paper, a robust fuzzy precompensated PID controller using immune algorithm for load frequency control of 2-area power system is proposed. Here, a fuzzy precompensated PID controller is designed as a fuzzy logic based precompensation approach for PID controller. This scheme is easily implemented by adding a fuzzy precompensator to an existing PID controller. We optimize the fuzzy precompensator with an immune algorithm for complementing the demerit such as the difficulty of the component selection of fuzzy controller, namely, scaling factor, membership function and fuzzy rules. Simulation results show that the proposed robust load frequency controller can achieve good performance even in the presence of generation rate constraints.

• 전기학회논문지
• /
• 제57권3호
• /
• pp.518-526
• /
• 2008

The fuzzy self-tuning PID controller is a PID controller with a fuzzy logic mechanism for tuning its gains on-line. In this structure, the proportional, integral and derivative gains are tuned on-line with respect to the change of the output of system under control. This paper deals with two types of fuzzy self-tuning PID controllers, rule-based fuzzy PID controller and learning fuzzy PID controller. As a medical application of fuzzy PID controller, the proposed controllers were implemented and evaluated in a laparoscopic surgery robot system. The proposed fuzzy PID structures maintain similar performance as conventional PID controller, and enhance the position tracking performance over wide range of varying input. For precise approximation, the fuzzy PID controller was realized using the linear reasoning method, a type of product-sum-gravity method. The proposed controllers were compared with conventional PID controller without fuzzy gain tuning and was proved to have better performance in the experiment.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2345-2348
• /
• 2003

This paper deals with a problem of automatic landing guidance and control system design. The auto-landing control system for the longitudinal motion is designed in the classical PID controller. The controller gains are properly adapted to variation of the performance using fuzzy logic as a gain scheduler for the PID gains. This control logic is applied to the problem of the automatic landing control system design. From the numerical simulation using the 6DOF nonlinear model of the associated airplane, it is shown that the auto-landing maneuver is successfully achieved from the start of the flight conditions: 1500 ft altitude, 250 ft/sec airspeed and zero flight path angle.

• 중소기업융합학회논문지
• /
• 제4권1호
• /
• pp.31-39
• /
• 2014

PID 오토 튜닝 컨트롤러는 퍼지 논리를 통해 설계되었다. 이러한 오류 및 오류 파생 의견으로 일반적인 값은 발견적 표현으로 변경, 그들은 퍼지 및 defuzzification 과정을 통해 PID 이득을 결정했다. 퍼지 절차 및 PID 제어기 설계는 개별적으로 간주하고, 그것들을 혼합하고, 분석 하였다. 퍼지 논리에 의해 획득 자동 조정 PID 컨트롤러는 3 차 플랜트 제어 이하의 능력을 보여 주었다. 또한 설계된 자동 동조 방식으로 추적 문제를 참조하는 데 적용한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권7호
• /
• pp.927-934
• /
• 2012

This paper suggests a new fuzzy PID controller with variable parameters which improves the shortage of the fuzzy PID controller with fixed parameters suggested in [9]. The derivation procedure follows the general design procedure of the fuzzy logic controller, while the resultant control law is the form of the conventional PID controller. Therefore, the suggested controller has two advantages. One is that it has only four fuzzy linguistic rules and analytical form of control laws so that the real-time control system can be implemented based on low-price microprocessors. The other is that the PID control action can always be achieved with time-varying PID controller gains only by adjusting the input and output scalers at each sampling time.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제4권1호
• /
• pp.70-78
• /
• 2004

This paper proposes non-linear control method using immune algorithm based fuzzy logic. Nonlinear dynamic system exist widely in many types of systems such as chemical processes, biomedical processes, and the main steam temperature control system of the thermal power plant. Up to the present time, PID Controllers have been used to operate these systems. However, it is very difficult to achieve an optimal PID gain with no experience, because gain of the PID controller has to be manually tuned by trial and error. An inverted pendulum control problem is selected to illustrate the efficiency of the proposed method and defines relationship state variables $\chi$, $\chi$, $\theta$, $\theta$ using immune fuzzy.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 The Third Asian Fuzzy Systems Symposium
• /
• pp.57-62
• /
• 1998

This paper presents an auto tuning method of PID controller based on the application of fuzzy logic. The proposed method combined the principles of PID control with fuzzy control, which cam considerably improve the performance index of PID controller. Simulation results show that higher performance and accuracy of overall system for desired value is achieved with our manner when compared to widely-used conventional tuning method.

• 한국조명전기설비학회지:조명전기설비
• /
• 제8권1호
• /
• pp.53-56
• /
• 1994

PID 제어기는 많은 서보 제어 시스템에 사용되고 있다. 하지만 제어 시스템이 외란이나 시변특성을 가졌을 때 시스템의 강인제어가 어렵게 된다. 이에 대한 보완적인 한 방법으로 본 논문에서는 PID 제어기가 퍼지 레귤레이터를 갖는 제어기법을 제시하였다. 퍼지 레귤레이터는 에러와 에러 변화분에 의해서 설계되며, k번째 제어 입력은 k번째와(k-1)번째 비퍼지화 값의 덧셈에 의해 결정된다. 제어입력은 입력측에 전달된다. 퍼지 레귤레이터에 의한 강인한 제어기능은 시뮬레이션에 의해 확인하였다.