• 융합신호처리학회논문지
• /
• 제5권2호
• /
• pp.138-142
• /
• 2004

본 논문은 모델추종 제어을 위한 PID제어기법을 제안한다. 이산시간영역에서 제어성능을 개선하기 위해 제안하였고, PID 제어계에 새로운 전치 보상기를 삽입하여 모델추종제어계가 되도록 하였다. 외란이나 부하변동에 의해서 계의 응답이 변할 때 PID 제어기의 이득을 재조정할 필요가 있다. PID 제어계에서 각 PID 이득이 제어계의 성능을 크게 좌우하게 되므로 신경망을 PID제어기에 결합하여 제어계의 성능을 향상시켰고 제안한 제어계에서 PID제어기의 이득은 역전파 알고리즘에 의해 자동적으로 조정되어지도록 하였다. 모델추종 제어계의 제어성능을 확인하기 위하여 제어대상을 직류 서보 전동기의 각 위치로 하였다. 이것을 위치 제어계에 적용하여 실험을 통해 그 성능을 증명하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.68-68
• /
• 2000

This paper presents a fuzzy modified PID controller that uses linear fuzzy inference method. In this structure, the proportional and derivative gains vary with the output of the system under control. 2-input PD type fuzzy controller is designed to obtain the varying gains. The proposed fuzzy PID structure maintains the same performance as the general-purpose linear PID controller, and enhances the tracking performance over a wide range of input. Numerical simulations and experimental results show the effectiveness of the fuzzy PID controller in comparison with the conventional PID controller.

• 제어로봇시스템학회논문지
• /
• 제7권7호
• /
• pp.622-631
• /
• 2001

This paper presents a fuzzy modified PID controller that uses linear fuzzy inference method. In this structure, the proportional and derivative gains vary with the output of the system under control. 2-input PD type fuzzy controller is designed to obtain the varying gains. The proposed fuzzy PID structure maintains the same performance as the same performance as the general-purpose linear PID controller, and enhances the tracking performance over a wide range of input. Numerical simulations and experimental results show the effectiveness of the fuzzy PID controller in comparison with the conventional PID controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.86-86
• /
• 2000

This paper describes a neural network based fuzzy type PID control scheme. The PID controller is being widely used in industrial applications. however, it is difficult to determine the appropriate PID gains for (he nonlinear system control. In this paper, we re-analyzed the fuzzy controller as conventional PID controller structure, and proposed a neural network based fuzzy type PID controller whose scaling factors were adjusted automatically. The value of initial scaling factors of the proposed controller were determined on the basis of the conventional PID controller parameters tuning methods and then they were adjusted by using neural network control techniques. Proposed controller was simple in structure and computational burden was small so that on-line adaptation was easy to apply to. The result of practical experiment on the magnetic levitation system, which is known to be hard nonlinear, showed the proposed controller's excellent performance.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2003년도 하계학술대회 논문집
• /
• pp.165-168
• /
• 2003

In this paper the design of the model following control system is proposed using the PID control structure. The games of the PID controller in the proposed control system are automatically adjusted by back-propagation algorithm of the neural network. And applying to the position control system, it's performance is verified through the results of computer experiment.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 춘계학술대회 논문집
• /
• pp.399-404
• /
• 2005

본 논문은 생체시스템의 인공면역시스템을 이용한 Immunized PID 제어기를 구성하였으며, 상층부위에 제동시스템이 부착된 다층 건축물의 진동제어에 적용하였다. 인공면역시스템은 인체가 외부로부터 침투하는 바이러스, 병원균 등으로부터 보호하기 위하여 내부의 항체들이 이를 극복하기 위하여 행동하는 현상을 모델링한 것으로써 외란입력에 대한 적응성 및 강인한 응답특성을 가지고 있다. 본 논문에서 설계된 제어시스템은 항만의 건축물에 능동제어기로 적용하였으며, 바람이나 지진과 같은 환경적 부하로 인해 발생되는 건축물의 응답변위를 컴퓨터 시뮬레이션을 통해 나타내었다. 그리고, 기존의 진동제어에 널리 이용되는 제어기도 함께 적용하여 제안한 제어기 성능의 우수성을 입증하고자 함과 동시에 인공면역시스템을 응용한 제어기 설계에 대한 비젼도 제시하고자 한다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권12호
• /
• pp.691-696
• /
• 2002

This paper presents a neural network based self-tuning fuzzy PID control scheme with variable learning rate for induction motor speed control. When induction motor is continuously used long time, its electrical and mechanical Parameters will change, which degrade the Performance of PID controller considerably. This Paper re-analyzes the fuzzy controller as conventional PID controller structure, introduces a single neuron with a back-propagation learning algorithm to tune the control parameters, and proposes a variable learning rate to improve the control performance. Proposed scheme is simple in structure and computational burden is small. The simulation using Matlab/Simulink and the experiment using dSPACE(DS1102) board are performed to verify the effectiveness of the proposed scheme.

• 전기학회논문지
• /
• 제61권2호
• /
• pp.303-311
• /
• 2012

In this study, we introduce a dynamic process model as well as the design methodology of optimized fuzzy controller for its efficient application to vacuum production system to produce a semiconductor, solar module and display and so on. In a vacuum control field, PID control method is widely used from the viewpoint of simple structure and preferred performance. But, PID control method is very sensitive to the change of environment of control system as well as the change of control parameters. Therefore, it's difficult to get a preferred performance results from target system which has a complicated structure and lots of nonlinear factors. To solve such problem, we propose the design methodology of an optimized fuzzy PID controller through a following series of steps. First a dynamic characteristic of the target system is analyzed through a series of experiments. Second the process model is built up and its characteristic is compared with real process. Third, the optimized fuzzy PID controller is designed using genetic algorithms. Finally, the fuzzy controller is applied to target system and then its performance is compared with that of other conventional controllers(PID, PI, and Fuzzy PI controller). The performance of the proposed fuzzy controller is evaluated in terms of auto-tuned control parameters and output responses considered by ITAE index, overshoot, rise time and steady state time.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.268-271
• /
• 2004

This paper describes the development of a fuzzy logic control based on PID controller to improve the performances of the control system using conventional PID controller for the cascade process control systems. The structure of the proposed control system consists of two fuzzy-based PID controllers. One is used to eliminate the input disturbances of the inner loop and the other is used to regulate output response of the outer loop. The fuzzy PID design is derived from the linear-time continuous function of the conventional PID controller. The performance of the proposed controller is verified by MATLAB/SIMULINK simulation. Results of simulation studies demonstrates the outstanding of the control system using fuzzy-based PID controller in terms of reduced overshoot and fast response compared with the conventional PID controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1182-1184
• /
• 2001

This paper presents a neural network based self-tuning fuzzy PID control scheme for induction motor speed control. The PID controller is being widely used in industrial applications. When continuously used long time, the electric and mechanical parameters of induction motor change, degrading the performance of PID controller considerably. This paper re-analyzes the fuzzy controller as conventional PID controller structure, and proposes a neural network based self-tuning fuzzy PID controller whose scaling factors are adjusted automatically. Proposed scheme is simple in structure and computational burden is small. The simulation using Matlab/Simulink is performed to verify the effectiveness of the proposed scheme.