• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.231-232
• /
• 2007

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.1
• /
• pp.66-72
• /
• 2004

PID control has been well used for several decades. For PID algorithms, some tuning methods are used for selecting PID parameters and with these selected parameters, PID control system is designed. But in some cases various kinds of performance indices are used instead of well-known tuning rules, and so variable type of performance index must be tested so that the designed control system meets the some specifications. For 2 DOF PID controller design this paper presents a linear combinational type of performance indices constituting of index for robust performance, which is obtained by h infinity norm of a weighted complementary sensitivity function, including other time domain indices such as error, energy and changing rate of control input. By numerical methods, the optimal 2 DOF PID parameters are obtained. Therefore various types of 2 degree of freedom PID controllers such as I-PD controller are used so that this two degree of freedom PID controllers may give more desirable output characteristics. Simulations are done with MATLAB m file and mdl files.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.63 no.4
• /
• pp.290-294
• /
• 2014

PID(Proportional, Integral, Derivative) controller is the most popular process controllers in nuclear power plants. The optimized parameter setting of the process controller contributes to the stable operation and the efficiency of the operating nuclear power plants. PID parameter setting is tuned when new process control systems are installed or current process control systems are changed. When the nuclear plant is shut down, a lot of PID tuning methods such as the Trial and Error method, Ultimate Oscillation method operation, Ziegler-Nichols method, frequency method are used to tune the PID values. But inadequate PID parameter setting can be the cause of the unstable process of the operating nuclear power plant. Therefore the results of PID parameter setting should be simulated, optimized and finally verified. This paper introduces the simulation method of PID tuning to optimize the PID parameter setting and confirms them of the actual PID controller in the operating nuclear power plants. The simulation method provides the accurate process modeling and optimized PID parameter setting of the multi-loop control process in particular.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2000.04a
• /
• pp.180-185
• /
• 2000

발전소 등의 대규모 공정 플랜트에서 사용하고 있는 대부분의 상용 제어기는 PID 제어기이며, 온도 루프를 제외한 대부분의 제어루프가 PI 제어기를 채용하고 있다. 제어 시스템의 성능이 제어기 파라미터의 값에 의해 결정되므로, PI 제어기의 튜닝이 중요하다. 한편, 실제 현장에서의 PI 제어기의 튜닝은 많은 시간과 노력을 필요로 하는 시행착오에 의해서 이루어지고 있으며, 각 제어 루프 제어기 파라미터의 초기값 설정에 어려움을 갖고 있는 실정이다. PI 튜닝 기법이 많이 나와 있지만 시험 신호의 인가 문제로 인해 현장 활용에는 많은 어려움을 가지고 있다. 본 논문에서는 단순한 시험 신호로부터 PI 초기 설정값을 산출할 수 있는 방법에 대해서 알아본다. 또한 발전소에 적용된 국산 분산 제어 시스템을 보면, 대부분 데이터 로깅 시스템으로서만 활용되고 있고, 제어 시스템으로의 활용은 거의 이루어지지 않고 있으며, PID제어기에 대한 구현도 완벽하지 못하여 디지털 PI 제어기의구현 방법에 대한 고찰도 요구되고 있다. 본 논문에서는 디지탈 PI 제어기를 구현하는데 있어서 필요한 사항들, 즉 아날로그 제어기의 디지털 등가 제어기로의 변환 기법, 샘플링 주기의 결정 방법, 그리고 그 외에 공정 제어기가 가져야할 기능들에 대해서 언급한다. 그리고나서 PI 튜닝 기법과 아날로그 제어기의 디지털 등가 제어기로의 변환기법, 샘플링 주기 결정 방법 등에 대해 플랜트 모델을 선정하고 시뮬레이션을 통해 그 효용성을 보인다.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.957-966
• /
• 2023

In this paper, we propose a new real-time adaptive PID temperature control technique. This is a technique that prevents overshoot by introducing a model that represents the control object. To prevent excessive integration that causes overshoot, integral control adjusts the integral gain to track the heat loss of the model in real time. In the conventional PID control, the integration was dependent on proportional control and the gain was fixed to a constant. As a result, applying two gains that mismatch each other could cause excessive overshoot. However, the proposed adaptive control actively eliminates overshoot so that the integral control amount does not always exceed the heat loss. The cause of overshoot in PID control is integration. Basically, proportional control does not cause overshoot. Therefore, according to the proposed technique, adaptive PID control without the need for tuning experiments can be realized.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.781-786
• /
• 1998

Since a gas turbine is still a significant contributor to peak time, it is very important to tune the gains of P. I. D to get a maximum power and stability within permissible limits. In the gas turbine, the main control loop must adjust the fuel flow to ensure the correct output power and frequency. but it is not easy, because the control loop is composed of many subsystems. In this paper we acquire a transfer function based on the operations data of Gun-san gas turbine and study to apply a loop compensation type 2-DOF PID controller tuning by neural-network to control loop of gas turbine to reduce phenomena caused by integral and derivative actions through simulation. We obtained satisfactory results to disturbances of subcontrol loop such as, fuel flow, air flow, turbine extraction temperature.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2003.06a
• /
• pp.169-172
• /
• 2003

PID control has been well used for several decade. For PID algorithm, some tuning methods are used and with these parameters, control system is designed. But in some cases various kinds of performance are needed, so variable type of performance index must be utilized so that the designed control system meets the conditions. This paper presents some linear combinational type of performance index and with numerical methods, the PID parameters are obtained. Moreover I-PD type controller is used so that this two degree of freedom controller may give more desirable output characteristics. Simulations are done with MATLAB m file and mdl files.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.4
• /
• pp.59-64
• /
• 2022

Vibration is one of the factors that degrades the performance of equipment and measurement equipment used in high-tech industries such as semiconductors and display. The vibration isolator is classified into passive type and active type. The passive vibration isolator has the weakness of insufficient vibration isolation performance in the low frequency band, so an active vibration control system that can overcome these problems is used recently. In this paper, PID controller is used to control the active vibration isolator. Methods for setting the gain of the PID controller include the Zeigler-Nichols method, the pole placement method. These methods have the disadvantage of requiring a lot of time or knowing the system model accurately. This paper proposes the gain auto tuning method of the active vibration isolator applied with the PSO algorithm, which is an optimization algorithm that is easy to implement and has stable convergence performance with low calculations. It is expected that it will be possible to improve vibration isolation performance and reduce the time required for gain tuning by applying the proposed PSO algorithm to the active vibration isolator.

• Journal of IKEEE
• /
• v.28 no.2
• /
• pp.136-144
• /
• 2024

In this paper, we propose a PID controller for altitude control of quadrotor system with experimental analysis. The Routh-Hurwitz test is applied to analyze the system to which our proposed controller is applied. We also summarize experimental data in which the gain values of kP, kI, and kD are changed using MATLAB and Simulink based on mathematical modeling of the quadrotor system. Based on the summarized experimental data, we analyze the effect of changes in each gain values (k_P, k_I, k_D) of PID controller on altitude control of quadrotor, and present an algorithm for tuning the PID controller gain values. The PID controller with the proposed algorithm is applied to AR.Drone system, subsequently and result are verifised through experiments.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.11
• /
• pp.1072-1078
• /
• 2005

The present study has been conducted to tune a PID controller for large thermal systems such as a thermal environment chamber. In spite of large thermal mass of the thermal chamber under test, its response delay time was found to be negligible mainly due to high air recirculation rate. In general, heating and cooling capacities tend to be small compared the size of a thermal environment chamber, which leads to long transient periods of one hour or so. In the study, a PI tuning method is suggested which makes system responses faster while reducing overshoots and hunting by utilizing efficiently proportional band of actuators.