• Journal of the Korea Computer Industry Society
• /
• v.8 no.4
• /
• pp.221-228
• /
• 2007

Many kinds of microcontrollers such as 8051, PIC16 and Atmega series are used for the automatic control system, home appliances and communication equipments manufacturing. It is very important to understand the basic operational principles of microcontrollers and their design concepts. There are many kinds of educational microcontroller trainers and also they are designed and assembled very complicatedly. For the students or developers, it is very difficult to catch the basic operation schemes and apply the techniques to the control system. And also it requires much cost and time for the various kinds of trainers purchasing. In this paper, standardization of pins layout and peripheral modules for the general microcontroller usage was introduced and tested with 89C2051, 89C51, PIC16F84, PIC16F877, Atmega8535 and Atmega128, etc. As a result of test, it was found that saving the cost and time using this suggested device was possible. And also it was very effective way to understand microcontroller design and programming techniques.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.10
• /
• pp.94-101
• /
• 2004

This paper presents the development of a keypad test system for the improvement of working environment and productivity using PTC 16F877 microprocessor. In order to detect the fault of keypad products, hardware and software design is performed in this system. Keypad fault detection system is controlled by the 8 bit one chip PIC microcontroller for the exactness and speed. Developed panel of the keypad test system is comprised of the sub-panel for selecting in the inspected keypad types and the main panel f3r displaying the working order and fault position. Furthermore, all data from keypad inspection are stored in main memory of personal computer for the database. All these functions lead to the improvement of working speed and environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.12
• /
• pp.1698-1704
• /
• 2018

This paper presents a implementation of a chaotic Lorenz system for data secure communication applications. Here we have used PIC18F family-based microcontroller to generate the chaotic signal, and simulated waveform patterns confirm that the chaotic behavior of the microcontroller based discrete time chaotic Lorenz system. There are three R-2R ladder type A/D converters have been implemented for conversion of direct microcontroller digital output into analog waveform, utilizing this specific microcontroller relevant to this experiment work, microcontroller ports B, C and D have been utilized for its time waveform outputs X, Y and Z respectively. XC8 compiler used for the compilation of the program. MATLAB and PROTEUS software platforms are used for simulation. Finally, chaotic time wave forms, 2D chaotic attractors were obtained and secure communication analog waveforms were also verified by experimental measurement.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.12 s.177
• /
• pp.70-76
• /
• 2005

It is known that natural awakening of us in the morning is due to stimulation of the reticular activation system through biological clock in the suprachiasmatic nucleus of hypothalamus by the morning sunlight. If we sleep at dark rooms without windows and so without morning sunlight, thus, it is not easy fur us to get up refreshingly in the morning. In this paper, we propose an automatic sunrise household lighting system that helps us fer getting up cheerfully in the morning even if we sleep in dark rooms without morning sunlight. The proposed lighting system is an embedded system that turns automatically on the electric lamp and makes it brighter and brighter coincidently with the actual sunrise. The proposed system is composed of a PIC microcontroller with flash memory, a real-time clock IC, a D/A converter, an amplifier, a dimmer unit, a light bulb, a display panel and a keyboard. The validity of the proposed intelligent lighting system is demonstrated via a prototype production and experimentation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.487-489
• /
• 2018

This paper presents chaotic Lorenz system implementation for secure data communication applications. In this work chaotic signal is generated by a PIC18F family based microcontroller, XC8 compilers have been utilized for the compilation of C code of microcontroller program. For simulation work Matlab and Proteus platforms were utilized and finally, chaotic time waveforms, 2D and 3D chaotic attractor were obtained and secure communication waveforms were achieved successfully.

• Journal of information and communication convergence engineering
• /
• v.7 no.4
• /
• pp.561-564
• /
• 2009

A cryptographic dongle, which is capable of transmitting encrypted voice signals over the CDMA/GSM voice channel, was designed and implemented. The dongle used PIC microcontroller for signals processing including analog to digital conversion and digital to analog conversion, encryption and communicating with the smart phone. A smart phone was used to provide power to the dongle as well as passing the encrypted speech to the smart phone which then transmits the signal to the network. A number of tests were conducted to check the efficiency of the dongle, the firmware programming, the encryption algorithms, and the secret key management system, the interface between the smart phone and the dongle and the noise level.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.833-834
• /
• 2006

In this paper, It is proposed collecting, processing, and learning of data with PIC16F877 and Acode 300[3], constructing database in PC. The PIC16F877 microcontroller nodes are the radio sensor and the DC motor controller. The PC of flexible factory level construct the data-table for object-oriented optimal environment control. The DC Motor control command is decision with back-propagation.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.149-151
• /
• 1997

This paper proposed a new method for the measurement of optical encoder. So far several methods were used for the encoder measurements, there were noise problems and needed many space to realize it. Specially, it is more serious under the multi-motor system. In this paper, we adapted the PIC microcontroller and replaced the TTL logics with the PIC software. Therefore, the effects of noise can be reduced, and we can realize the measuring method for the optical encoder under multi-motor system within one millisecond time base.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.2
• /
• pp.163-168
• /
• 2010

This paper presents the practical implementation of an over-temperature protection system for power semiconductor devices. In the proposed system, temperature variation is provided with just using $R_{ds(on)}$ characteristics of power MOSFET, while extra device such as a temperature sensor or an over-temperature detection transistor is needed to monitor the temperature in the conventional method. The proposed protection technique is experimentally tested on IRF840 power MOSFET. The PIC microcontroller PIC16F877A is used for the implementation of the proposed protection algorithm. The built-in 10-bit A/D converter is utilized for detecting voltage variance between a drain and a source of IRF840. The induced temperature-resistance relationship based on the measured drain-source voltage, supplies a gate signal to the power MOSFET. If detected temperature's voltage exceeds any a protection temperature's voltage, the microcontroller removes the trigger signal from the power MOSFET. These test results showed satisfactory performances of the proposed protection system in term of accuracy within 1.5%.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.70-72
• /
• 2005

The present paper designed a weight measuring instrumentation system in which data conversion and a series of signal processing were totally equipped. 16 loadcell are incoming sensors and each output of the loadcell was amplified and filtered for proper analog signal processing. Several measuring instrumentation OP amps and general purposed OP amps were used. 12 bits AID converters converted analog signals to digital bits and a PIC microprocessor controlled the 16 channels of loadcell. RF RS232 modules were used for wireless communication between the PIC microprocessor and an ethernet host for a remote sensor monitoring system development.