• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.3
• /
• pp.282-289
• /
• 2005

This paper proposes a fuzzy neural network controller based on the vector control for interior permanent magnet synchronous motor(IPMSM) drive system. The hybrid combination of neural network and fuzzy control will produce a powerful representation flexibility and numerical processing capability This paper does not oかy presents speed control of IPMSM using neuro-fuzzy control(NFC) but also speed estimation using artificial neural network(ANN) controller. The back propagation neural network technique is used to provide a real time adaptive estimation of the motor speed. The error between the desired state variable and the actual one is back-propagated to adjust the rotor speed, so that the actual state variable will coincide with the desired one. The back propagation mechanism is easy to derive and the estimated speed tracks precisely the actual motor speed. Thus, it is presented the theoretical analysis as well as the analysis results to verify the effectiveness of the proposed method in this paper.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.5
• /
• pp.86-94
• /
• 2008

In this paper proposed the solar tracking system to use a fuzzy based on PC in of order to increase an output of the PV(Photovoltaic) array. The solar tracking system operated two DC motors driving by signal of photo sensor. The control of dual axes is not an easy task due to nonlinear dynamics and unavailability of the parameters. Recently, artificial intelligent control of the fuzzy control, neural-network and genetic algorithm etc. have been studies. The fuzzy control made a nonlinear dynamics to well perform and had a robust and highly efficient characteristic about a parameter variable as well as a nonlinear characteristic. Hence the fuzzy control was used to perform the tracking system after comparing with error values of setting-up, nonlinear altitude and azimuth. In this paper designed a fuzzy controller for improving output of PV array and evaluated comparison with efficient of conventional PI controller. The data which were obtained by experiment were able to show a validity of the proposed controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2372-2377
• /
• 2003

Nonlinear dynamic system exist widely in many types of systems such as chemical processes, biomedical processes, and the main steam temperature control system of the thermal power plant. Up to the present time, PID Controllers have been used to operate these systems. However, it is very difficult to achieve an optimal PID gain with no experience, because of the interaction between loops and gain of the PID controller has to be manually tuned by trial and error. This paper suggests control approaches by immune fuzzy for the nonlinear control system inverted pendulum, through computer simulation. This paper defines relationship state variables $x,{\dot{x}},{\theta},\dot{\theta}$ using immune fuzzy and applied its results to stability.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.655-659
• /
• 2004

This paper proposes a fuzzy logic based vector control for the gearless traction machine drive systems using a permanent-magnet synchronous motor (PMSM). The performance of the proposed Fuzzy Logic Control(FLC)-based PMSM drive are investigated and compared to those obtained from the conventional PI controll-based drive system. We have confirmed theoretically and experimentally at different dynamic operating conditions such as step change in command speed, step change in load, etc. The comparative experimental results show that the FLC is more robust and, hence, found to be a suitable replacement of the conventional Pl controller for the high-performance elevator drive system.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2423-2425
• /
• 2004

Mobility of an indoor wheeled robot is affected by adhesion force that is related to various floor conditions. When the adhesion force between driving wheels and the floor decreases suddenly, the robot has slip state. First of all, this paper models adhesion characteristics and slip in wheeled robot. Secondly, the paper proposes estimation method of adhesion force coefficient(AFC) according to slip velocity. In order to overcome this slip problem, optimal slip velocity must be decided for stable movement of wheeled robot. The paper proposes an anti-slip control system based on an ordinary disturbance observer, that is, the re-adhesion control is achieved by reducing the driving torque enough to give maximum adhesion force coefficient. fuzzy logic controller(FLC) is petty useful with slip through that compare fuzzy with PI control for the controller performance. These procedure is implemented using a Pioneer 2-DXE parameter.

• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.245-247
• /
• 1999

The problem of small-signal stability is usually one of insufficient damping of system oscillations. The use of power system stabilizers to control generator excitation system os the most cost effective method of enhancing the small-signal stability of power system. This paper presents the fuzzy type stabilizing controller to damp out the sustained oscillation, which is observed in normal operation. through the comparative simulation with PI type power stabilizer under various system operating condition, the efficiency of fuzzy stabilizing controller with respect to nonlinear power system is verified.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.05a
• /
• pp.404-407
• /
• 2009

The field oriented control of induction motors is widely used in high performance applications. However, detuning caused by parameter disturbance still limits the performance of these drives. In order to accomplish variable speed operation conventional PI-like controllers are commonly used. These controllers provide limited good performance over a wide range of operation even under ideal field oriented conditions. This paper is proposed adaptive fuzzy controller(AFC) and artificial neural network(ANN) based on the vector controlled induction motor drive system. Also, this paper is proposed control of speed and current using fuzzy adaptation mechanism(FAM), AFC and estimation of speed using ANN. The proposed control algorithm is applied to induction motor drive system using FAM, AFC and ANN controller. Also, this paper is proposed the analysis results to verify the effectiveness of this controller.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.223-225
• /
• 2002

In this paper, we designed fuzzy legit controller(FLC) for HVDC current control using genetic algorithm. The proposed method was applied to HVDC power system simulator in Korea Electrotechnology Research Institute(KERI). We are adjusted input/output gain of FLC by real-time using genetic algorithm. Experimental results show that FLC has the better control performance than PI controller in terms of settling time, rising time.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.6
• /
• pp.389-394
• /
• 2004

This paper proposes a speed estimation method using FLC(Fuzzy Logic Controller) in order to realize the speed control of PMAM(Permanent Magnet AC Motor) with no speed sensor. This method uses FLC as a adaptive laws of MRAS(Model Reference Adaptive System) and estimates the rotor speed of PMAM with a difference between the reference model and the adjustable model. Speed control is performed by PI controller with the estimated speed. The experiment is executed to verify the propriety and the effectiveness of the proposed system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.66.5-66
• /
• 2001

A proposed fuzzy-sliding mode controller in this paper shows that it can reduce amount of chattering inherent to sliding mode control and it is robust against parameter uncertainties. Sliding mode control is one of the control method for nonlinear systems. It can provide good transient performance and system robustness for nonlinear system. But chattering is a serious problem of the sliding mode control. The chattering is caused by steady/state error or uncertainties of the system. There are three kinds of method that can remove chattering. First, steady-state error can be removed by adding PI controller to the system. Second, putting dead-zone in sliding surface can be insensitive uncertainties ...